Vol. 7 No. 2.23 (2018): Special Issue 23

Articles

• Approach to analysis of technical -organizational system functioning on the base of semi-markov process theory

  • 

  Aleksey Gavrilin, Tatiana Gorbunova, Marina Tumanova, Oleg Ratnikov

  1-3

• Prediction the wear of sliding bearings

  • 

  Dykha Aleksandr, Marchenko Dmitry

  4-8

• Analysis of modern modeling methods in problems of stabilization of motions of mechatronic systems with differential constraints

  • 

  Krasinskiy A.Ya, Krasinskaya E.M.

  9-13

• Fungicidal and antibacterial activity of the hydrogel compositions with silver

  • 

  A V. Smagin, M V. Smagina, G B. Kolganihina, N B. Sadovnikova, A Y.Gulbe, A S. Bashina

  14-20

• Influence of lignosulfonic acids on the formation of magnetoactive compound in the redox reaction of iron(II) with chromate-anion

  • 

  Nikolay Yu. Kuzyakov, Viacheslav A. Veshnyakov, Yuriy G. Khabarov, Galina V. Pankina

  21-23

• Numerical simulation of oil spills based on the GNOME and ADIOS

  • 

  A Elizaryev, G Maniakova, A Longobardi, E Elizareva, R Gabdulkhakov, A Nurutdinov, R Khakimov

  24-27

• The study of hydraulic hammer device in drilling tool assembly in hydraulical rotary drilling

  • 

  R I. Suleimanov, M S. Gabdrakhimov, M Ya. Khabibullin, L M. Zaripova, E R. Vasilyeva

  28-30

• The research of clinker monominerals modified suspensions’ rheological properties

  • 

  Kosukhin M M, Starostina I V, Kosukhin A M

  31-33

• Reclamation of chemical wastes for the production of efficient concrete modifiers

  • 

  Kosukhin M M, Starostina I V, Kosukhin A M

  34-37

• Research of the opportunity to use sludge wastes of ferrovanadium production as pigments for silicate paints

  • 

  Starostina I V, Kosukhin M M, Simonov M M, Starostina Yu.L

  38-41

• Application of ferric-silicon coagulant-flocculant of electric steel smelting slag for leachate treatment of communal solid waste landfills

  • 

  T A. Vasilenko, A A. Koltun

  42-46

• Nonlinear Vibration of Microbeams Based on The Elastics Foundation Using High-Order Energy Balance Method and Global Error Minimization Method

  • 

  D V. Hieu

  47-56

• Оrganisation of technological safety of production on military industrial complex

  • 

  Andreeva O N

  57-58

• Security Techniques for Wormhole Attack in Wireless Sensor Networks

  • 

  Surinder Singh, Hardeep Singh Saini

  59-62

• Scientific and economic support for construction development in the countryside of Ukraine

  • 

  Iryna Azhaman, Telichko Nataliya

  63-67

• Laboratory 3D printing system

  • 

  Anton V. Mironov, Aleksandra O. Mariyanac, Olga A. Mironova, Vladimir K. Popov

  68-72

• Information model of registration and analysis of technological factors arising during final processing of products of transport pipeline systems

  • 

  Volodimir Kotukh, Nataliy Kaptsova, Yuriy Pakhomov, Vitaliy Kosenko

  73-76

• Preliminary Design Investigation of Dual Stator HE FSM using Segmental Rotor

  • 

  Hassan Ali, Erwan Sulaiman, Zamri Omar, M F. Omar, Faisal Amin, S Khalidah Rahimi

  77-82

• Numerical simulation of the fire resistance of composite slabs with steel deck

  • 

  Paulo A. G. Piloto, Lucas M.S. Prates, Carlos Balsa, Ronaldo Rigobello

  83-86

• Study of Mechanical and Wear Properties of Stir-Cast Al-Si-Cu alloy

  • 

  Dileep Divakaran Namboodiri, S Ilangovan

  87-90

• A preliminary study on the new geotechnical weathering index in the evaluation of altered biotite granite

  • 

  Seung Hyun Choi, Chang Whan Oh, Khil Ha Lee, Young Boo Lee, Eun Kyeong Choi, Sung Wook Kim

  91-98

• Determination of Bending and Axial Compression Young’s Modulus of Cellular Mortar Exposed to High Temperatures

  • 

  M A. Othuman Mydin, N Mohamad, I Johari, A A. Abdul Samad

  99-102

• Implementation of One Dimensional Finite Difference Heat Conduction Method to Quantity Heat Transfer through Lightweight Cellular Mortar

  • 

  Md Azree Othuman Mydin, Mazlina Musa

  103-106

• Fabrication of ZnO/ZnO @ carbon dot as photo anode and Natural dye as photosensitizer for dye sensitized solar cell application

  • 

  Andal gopal, Deepa Jose, Sivagnanam .

  107-110

• Modeling of Radio-wave Propagation in Forest by the Method of Parabolic Equation

  • 

  M S. Mikhailov, E S. Malevich, V A. Permyakov

  111-113

• Assessment of the possibility of using the method of sludge-lignin dehydration of the Baikal Pulp and Paper Mill by the freeze-thaw method

  • 

  DI Stom, GO Zhdanova, SA Potekhin, AE Balayan, MN Saksonov Saksonov, MV Butyrin, VV Kondratiev, NA Ivanov, V Spirin, DA Kizeev

  114-118

• Comparison of beamforming algorithms based on localization of calibrating sound sources and air jet noise

  • 

  V Ershov, V V. Palchikovskiy

  119-123

• On the stabilization problems of non-holonomic systems with inhomogeneous constraints with incomplete information on the state

  • 

  Krasinskiy A.Ya., Krasinskaya E M

  124-128

• Making Unit Cost in Production Process More Accurate – the Role of Queueing

  • 

  Viktor Molnar, Abel Tumik

  129-132

• Procedure to Evaluate Current Formation Pressure in Wells with ESP

  • 

  O A. Gribennikov, L N. Balandin, V I. Astafev

  133-136

• Characteristics of finger indices of hand 1D:3D and 2D:4D in dependence on gender and type of the constitution

  • 

  Andrei I. Perepelkin, Victor B. Mandrikov, Alexander I. Krayushkin, Andrei B. Doronin, Oksana V. Matveeva

  137-139

• Portable complex for controlled explosive reactive drilling of rocks

  • 

  Viktor O. Solov’ev, Igor’ M. Shvedov

  140-142

• Comparison of solid biofuels produced from olive pomace with two different conversion methods: torrefaction and hydrothermal carbonization

  • 

  Selin Y. Gultekin, Hayati Olgun, Melih S. Celiktas

  143-147

• Calculation of Parameters and Design of the Movable Transfer Station with Vibrating Screen Feeder for the Conveyor System of Deep Queries

  • 

  Aleksander SÅ‚adkowski, Arkadiy Yudin, Anatoliy Komissarov, Yuliya Lagunova, Madinur Akhmetova, Ivan Stolpovskikh

  148-151

• 2D-FEA Based Design and Performance Analysis of Low Weight Segmented Rotor HE-FSM for Light Weight Aircrafts

  • 

  Hassan Ali, Erwan Sulaiman, Zamri Omar, M F. Omar, Faisal Amin

  152-156

• Preliminary Design Analysis of a New Field Excitation Flux Switching Machine with Segmental Rotor and Non-overlap Winding

  • 

  M F. Omar, E Sulaiman, H A. Soomro, G M. Romalan, S M. N. S. Othaman

  157-161

• Studies of radon activity in civil engineering and environmental objects

  • 

  Ilya P. Mikhnev, Svetlana V. Mikhneva, Natalia A. Salnikova

  162-166

• Effect of pressure changes in sliding contact

  • 

  Vera Deeva, Stepan Slobodyan

  167-170

• Development of generation special short articles for the given topic

  • 

  Kulik S D, Belov A N, Matveeva K I

  171-174

• Automatic Grading of Scanned Multiple Choice Answer Sheets

  • 

  Jirapond Muangprathub, Oatchima Shichim, Yuthaya Jaroensuk, Siriwan Kajornkasirat

  175-179

• Analysis of simply supported wood beams at ambient and high temperatures

  • 

  Elza M M Fonseca, Pedro J V Gouveia

  180-183

• Dynamic loading of electric machines during testing

  • 

  Sergey I. Malafeev, Sergey S. Malafeev

  184-187

• Indentation and flattening of rough surfaces spherical asperities

  • 

  Petr Ogar, Denis Gorokhov, Elena Ugryumova

  188-191

• Indentation of rigid rough surface into polymer coating layer

  • 

  Petr Ogar, Artem Kozhevnikov, Vladimir Elsukov

  192-195

• Performance of seismic shear panels under near-field motions

  • 

  Mariella Mariella Diaferio

  196-200

• On the Parameters consideration & analysis of menderline antenna for wireless sensor networks

  • 

  Harish Rajurkar, Dr Sudhir Akojwar

  201-204

• Effect of Complex Structural Material Coated the Flight Body to Measure the Absorption of Radar Radiation at Different Elevations of Flight Latitude

  • 

  Abbas Ali Mhmood Karwi

  205-215

• Estimation of occupational safety risks at energetic sector of Iron and Steel Works

  • 

  Volodymyr Kukhar, Nelly Yelistratova, Vadym Burko, Yulia Nizhelska, Olga Aksionova

  216-220

• Improvement in Speed of Trains in Poor Visibility & Advancement of Train Transport Signaling Mechanism

  • 

  Shantam Tandon, Karthik Subramanian, Tanmai Moundekar, Vansh Khanna

  221-227

• Heat loss analysis in a radiating slab of variable thermal conductivity

  • 

  Ramoshweu S. Lebelo, Kholeka C. Moloi

  228-231

• Load Flow Study of Isolated Hybrid Microgrid for Village Electrification

  • 

  Kuldip Singh, Dr M. Narendra Kumar, Dr Satyasis Mishra

  232-234

• Stability Analysis of Isolated Hybrid Microgrid for Village Electrification

  • 

  Kuldip Singh, Dr M. Narendra Kumar, Dr Satyasis Mishra

  235-237

• Calculation of plate-beam systems by method of boundary elements

  • 

  Mykola Surianinov, Oleksii Shyliaiev

  238-241

• Efficient carbonaceous sorbent based on the waste sludge of oil extraction industry for purifying wastewater from petroleum products

  • 

  Starostina I V, Nikitina A E, Kosukhin M M, Starostina Yu.L

  266-269

• About one decision of the quasiclassical kinetic equation

  • 

  Gladkov S O, Bogdanova S B

  270-273

• Electricity costs for grinding of cement with expanding additives

  • 

  Svetlana Samchenko, Dmitriy Zorin

  274-276

• The use of urban sewage sludge as a substrate in a microbial fuel cell

  • 

  RR Rudenko, EE Vasilevich, GO Zhdanova, KI Chizhick, IA Topchiy, DI Stom

  277-280

• The use of abrasive wastes in the practice of wastewater treatment from nickel ions

  • 

  L Porozhnyuk, N Lupandina, E Porozhnyuk

  281-283

• Coconut Fiber Strengthen High Performance Concrete: Young’s Modulus, Ultrasonic Pulse Velocity and Ductility Properties

  • 

  M A. Othuman Mydin, N Mohd Zamzani

  284-287

• Effects of Ultrasonication Time on Thermal Stability and Swelling Behaviour of The Commercial Organo-Montmorillonite (O-MMT)

  • 

  Asna R.A. Hamid, Azlin F. Osman

  288-291

• Finding interval estimates involving nuisance parameters

  • 

  Nadezhda Chiganova

  292-294

• Works execution organization at reconstruction and renovation of buildings after the fire with usage of slabs lifting method

  • 

  O E. Zyma, E V. Dyachenko, R I. Pahomov, S M. Zhyhylii

  242-246

• About the single system of protection classes of elements of critical information infrastructure by the criteria of importance and information security

  • 

  Andey O. Kalashniov, Igor F. Mik halevich

  247-250

• Risk assessment of prospective investment projects for the construction of nuclear power plants abroad

  • 

  Anna I. Guseva, Matvey V. Koptelov

  251-254

• Synthesis and Mechanical Characterization of Micro B4C Particulates Reinforced AA2124 alloy Composites

  • 

  Fazil N, V V Venkataramana, Madeva Nagaral, V Auradi

  255-259

• Arsenic and Heavy Metals Contamination of Soils Around Oyu Tolgoi and Tavan Tolgoi Mines, Located in The South Gobi Desert of Mongolia

  • 

  Galbadrakh Ragchaa, Temujin Enkhbat, Enkhtor Lkhamsuren

  260-262

• Hilbert diagnostics of convective structures and phase transition in super cooled water

  • 

  Yu. N. Dubnishchev, V A. Arbuzov, E V. Arbuzov, V S. Berdnikov, O S. Melekhina, V V. Sotnikov, A A. Shibaev

  295-300

• Use of saturated green material in vaporic thermal atmosphere to absorb ions have negative impact

  • 

  Abbas Ali Mahmood Karwi, Eman Mohammed Abdullah

  301-306

• Features of the structure active centers of industrial catalysts for the oxidative chlorination of ethylene

  • 

  Sergiy Kurta, Ihor Mykytyn, Victoria Ribun, Olga Khatsevich

  307-316

• Copper recovery from chalcopyrite flotation plant tailings acid leach using ion exchange resin dowtm XUS 43578.00

  • 

  Melvin M. Mashingaidze, Catherine N. Shifotoka

  317-322

• Travel demand estimation through corridor level analysis for hyderabad metro rail

  • 

  Prashanth Shekar Lokku, Csrk Prasad

  323-327

• Plastic tension of porous plates due pure bending

  • 

  Levonyan H L, Verlinski S V, Tyagunov A G, Tarasov D A

  328-331

• Methodology of Efficiency Assessment in the Context of Building Sustainability

  • 

  Jozef Švajlenka, Mária Kozlovská

  332-334

• Liquid Induced Vibrations of Truncated Elastic Conical Shells with Elastic and Rigid Bottoms

  • 

  Yury V. Naumenko, Vasyl I. Gnitko, Elena A. Strelnikova

  335-339

• On the Issue of Neural Modeling of Some Dynamic Parameters of Earthquake

  • 

  L P. Haritonova

  440-442

• A Comprehensive Study on Mechanical Properties of Nominal Grade Concrete Using Copper Slag as Partial Replacement to Fine Aggregate

  • 

  USHAKRANTI J, SRINIVASU K, NAGA SAI

  443-445

• Dry Sliding Wear Behavior of B4C and Graphite Particulates Reinforced A356 Alloy Composites

  • 

  Pankaj R Jadhav, B R Sridhar, Madeva Nagaral, Jayasheel I Harti, V Auradi

  446-449

• A Comprehensive Review on Energy Management Strategies in Hybrid Renewable Energy System

  • 

  Ch Laxmi, Dr M.Narendra Kumar, Dr Sushant Kumar Mandal

  450-454

• Hydrogen Production Through Water Splitting Reaction Using Titanium Dioxide (Tio2) Nanotubes Photocatalyst

  • 

  Mohdhasmizamrazali ., Nurarifah Ismail, Khairulanuar Mat Amin

  455-458

• Slot Pole Study of Field Excitation Flux Switching Machines Using Segmental Rotor and Non-Overlap Windings

  • 

  M F. Omar, E Sulaiman, H A. Soomro, L I. Jusoh, F Amin

  459-463

• Design of ASIC Square Calculator Using AncientVedic Mathematics

  • 

  Angshuman Khan, Sudip Halder, Shubhajit Pal

  464-466

• Parametric Design on Weld Characteristics of Submerged Arc Welding Process Parameters

  • 

  Sailender Mamunuri

  467-471

• Synthesizing Zro2 Nanoparticle as a Catalyst Through Thermal Decomposition of Phenol-Zirconium Complexes in Order to Degradation of Harmful Organic Substances Under UV Light

  • 

  Yahya Absalan, Olga. V. Kovalchukova

  472-474

• Analysis of Plastic Flow Localization in Bimetal Electrolytically Saturated with Hydrogen

  • 

  S Barannikova, Yu. Li, A Malinovskiy, L Zuev

  475-478

• How Can Environment Influence Ultra-Long Radio Propagation?

  • 

  M S. Mikhailov, A A. Volkova, V A. Permyakov

  479-482

• Short Review of Studies on Modeling of Technology and Technical Means Used for Production of Classical and Nanomodified Functional Polymer Composite Materials

  • 

  A E. Kolosov, E P. Kolosova

  483-488

• Experimental Study to Establish Compressive and Flexural Strength of High Performance Concrete (HPC) with Addition of Treated Cocos Nucifera Fiber

  • 

  Md Azree Othuman Mydin, Noridah Mohamad, Mohd Nasrun Mohd Nawi, Abdul Aziz Abdul Samad, Izwan Johari

  489-492

• Synthesis of Hydrophobic Filler for Polymer Composites

  • 

  V I. Pavlenko, N I. Cherkashina

  493-495

• Calcium Phosphate Bioceramic Material Local Influence on the Bone Biomechanical Properties at Rabbits with Experimental Osteoporosis

  • 

  Vladislavs Ananjevs, Aleksandra Anaņjeva, Janis Vetra, Andrejs Skagers, Ilze Salma, Janis Locs, Vladimir Kasyanov

  496-497

• Design of ALU System Using Novel PMOS and NMOS for Low Power and High Speed Applications

  • 

  Ashok Babu CH, J V.R. Ravindra, K Lalkishore

  498-504

• Securing Underwater Wireless Communication Networks

  • 

  D Naresh Kumar, . .

  505-509

• A Framework for Enhanced Tropos Goal-Driven Risk Assessment in Requirements Engineering

  • 

  ShankarNayak Bhkukya, Dr Suresh Pabboju

  510-515

• Automation of Work Processes at Ukrainian Sorting Stations

  • 

  Strelko Oleh, Kyrychenko Hanna, Berdnychenko Yulia, Hurinchuk Svitlana

  516-518