Plastic tension of porous plates due pure bending

  • Abstract
  • Keywords
  • References
  • PDF
  • Abstract

    The bending of the plate from rigid-plastic hardening material in the condition of plane deformation is investigated by analytical and numerical methods. Based on equations of the theory of plasticity of the porous materials the solution of the problem is lead to integration of the nonlinear differential equation regard to radial stress. The position of neutral axis is defined by numerical integration and the stress strain state components are received. Graphics of stress components and porosity changing are constructed on the height of the plate. The same problem simulated in ABAQUS software with the help finite element method. The results are compared.


  • Keywords

    Bending; Plate; Stress; Porosity; Numerical Integration; FEM; ABAQUS

  • References

      [1] Hill R. The mathematical theory of plasticity. Oxford 1950.

      [2] Hill R., British Iron and Steel Research Association, Report MW/B/6/49.

      [3] Petrosyan G.L., Petrosyan H.G., Levonyan H.L. On simplified formulas of the theory of plasticity of porous materials. // Conference of SEUA. - Yerevan, 2005. - V.2. - P. 411-413.

      [4] Levonyan H.L., PetrosyanKh.L. Theoretical and practical features in the bending of a plate // Conference of SEUA. - Yerevan, 2006. - V.1. - P. 226-229.

      [5] Malinin N.N., Shirshov A.A. Plastic bending of the plate in big deformations. // Izvestia VUZ. Machine-building, 1965, №8.-pp. 187-192.

      [6] Beiss P., Petrosyan G.L., Levonyan H.L., Petrosyan H.G. Porous cylindrical sample of high plastic deformation for testing and mechanical property definition, Proceedings of engineering academy of Armenia scientific and technological collected articles, Volume 4, number 2, Yerevan 2007, p 212-216.

      [7] Shirshov A.A. Investigation of plastic bending of the plate with hardening influence. // Izvestia VUZ. Machine-building, 1965, №7.- С. 168-174.

      [8] Green R.J., A plasticity theory for porous solids, International Journal of Mechanical Sciences, 14, №4, 215-214(1972).

      [9] Petrosyan G.L., Beiss P., Hambardzumyan A., Badalyan G. // Proceeding of AnnualSci. Conference of SEUA, - 2001.-V.1-pp.209-211.




Article ID: 12754
DOI: 10.14419/ijet.v7i2.23.12754

Copyright © 2012-2015 Science Publishing Corporation Inc. All rights reserved.