Laboratory 3D printing system

  • Abstract
  • Keywords
  • References
  • PDF
  • Abstract

    Present work describes the results of the development of the universal system, which capable to utilize varies 3D printing methodologies. The main goal of the study is to provide cheap, versatile and easy expandable equipment for multiple purpose research in the field of material science. 3D printing system was experimentally validated for fused deposition modeling, hydrogel, liquid dispensing and drop-on-demand printing, as well as 3D photopolymerisation by UV laser and/or LED light using different types of materials.



  • Keywords

    3D Printer; Drop-On-Demand; Laboratory Equipment; Rapid Prototyping; Syringe Dispenser.

  • References

      [1] Lee JY, An J, Chua CK, ”Fundamentals and applications of 3D printing for novel materials”, Applied Materialstoday, Vol. 7, (2017), pp.120-133,

      [2] Budding A, Vaneker THJ, Winnubst AJA, ”Open source powder based rapid prototyping machine for ceramics”, Procedia CIRP, Vol.6, (2013), pp.533–538,

      [3] Gudapati H, Dey M, Ozbolat I, ”A comprehensive review on droplet-based bioprinting: Past, present and future”, Biomaterials, Vol.102, (2016), pp.20-42,

      [4] Gao G, Yonezawa T, Hubbell K., Dai G., Cui X., ”Inkjet-bioprinted acrylated peptides and PEG hydrogel with human mesenchymal stem cells promote robust bone and cartilage formation with minimal printhead clogging”, Biotechnology. Journal, Vol.10, (2015), pp.1568-1577, doi:10.1002/biot.201400635.

      [5] Lee J, Kim KE, Bang S, Noh I, Lee C, ”A desktop multi-material 3D bio-printing system with open-source hardware and software”, International journal of precision engineering and manufacturing, Vol.18, (2017), pp. 605-612, doi:10.1007/s12541-017-0072-x .

      [6] Kinstlinger IS, Bastian A, Paulsen SJ, Hwang DH, Ta AH, Yalacki DR, Schmidt T, Miller JS, ”Open-Source Selective Laser Sintering (OpenSLS) of Nylon and Biocompatible Polycaprolactone”, PLoS ONE, Vol.11, (2016),

      [7] Gao, Q, He Y, Fu JZ, Liu A, Ma L, ”Coaxial nozzle-assisted 3D bioprinting with built-in microchannels for nutrients delivery”, Biomaterials, Vol.61, (2015), pp.203–215,

      [8] Bégin-Drolet A, Dussault MA, Fernandez SA, Larose-Dutil J, Richard LL, Hoesli CA, Ruel J, ”Design of a 3D printer head for additive manufacturing of sugar glass for tissue engineering applications, Additive Manufacturing”, Vol.15, (2017), pp.29–39,

      [9] Kun K, ”Reconstruction and development of a 3D printer using FDM technology”, Procedia Engineering, Vol.149, (2016), pp.203-211,

      [10] Online:

      [11] Online:

      [12] Online:

      [13] Online:

      [14] Online:

      [15] Mironov AV, Grigoryev AM, Krotova LI, Skaletsky NN, Popov VK, Sevastianov VI, ”3D Printing of PLGA Scaffolds for Tissue Engineering”, Journal of Biomedical Materials Research, Vol.105, (2017), pp.104-109, doi:10.1002/jbm.a.35871.

      [16] Barinov SM, Vakhrushev IV, Komlev VS, Mironov AV, Popov VK, Teterina AYu, Fedotov AYu, Yarygin KN, ”3D Printing of Ceramic Scaffolds for Engineering of Bone Tissue”, Inorganic Materials: Applied Research, Vol.6, (2015), pp.316–322, doi: 10.1002/jbm.a.35871.




Article ID: 11886
DOI: 10.14419/ijet.v7i2.23.11886

Copyright © 2012-2015 Science Publishing Corporation Inc. All rights reserved.