Optimizing Performance in Motorsport and Racing Vehicles‎Through Advanced Aerodynamics and Materials

  • Authors

    • Dr. Nidhi Mishra Assistant Professor, Department of CS & IT, Kalinga University, Raipur, India
    • Md Afzal Research Scholar, Department of CS & IT, Kalinga University, Raipur, India
    • Veena Kumar Professor, New Delhi Institute of Management, New Delhi, India
    https://doi.org/10.14419/13g5rk71

    Received date: May 2, 2025

    Accepted date: May 29, 2025

    Published date: October 31, 2025

  • Aerodynamics; Advanced Materials; CFD Simulation; Wind Tunnel Testing; Smart Structures

  • Abstract

    Within the motorsport context, the quest is endless to find that crucial advantage by upgrading the vehicle's performance potential. The ‎analysis of aerodynamics and innovative materials is the key to better efficiency, speed, and cost-saving. In this research study, new ‎approaches are used to supplement current ones, aiming to enhance vehicle performance by applying interventions in aerodynamic and ‎composite materials. This paper discusses CFD simulation, wind tunnel tests, and state-of-the-art material science, which aid in developing ‎new methods to reduce drag, increase downforce generation, and enhance vehicle stability. The paper examines the application of new ‎composites and novel car designs to improve the car's weight balance and strength, as well as to achieve maximum adaptability for racing ‎modes. All these innovations will contribute to the creation of racing cars that are most appropriate for different tracks and conditions‎.

  • References

    1. Xu, Y. (2024). Management of Globalization of Motorsport and Future Development. Highlights in Business, Economics and Management, 28, 33-41. https://doi.org/10.54097/618qav49.
    2. Ismail, K., & Khalil, N. H. (2025). Strategies and solutions in advanced control system engineering. Innovative Reviews in Engineering and Science, 2(2), 25-32.
    3. Dave, Deepam. Advances in Vehicular Aerodynamics. MS thesis. Purdue University, 2024.
    4. Katz, J. (2006). Aerodynamics of race cars. Annu. Rev. Fluid Mech., 38(1), 27-63. https://doi.org/10.1146/annurev.fluid.38.050304.092016.
    5. Romero, C. A., Correa, P., Ariza Echeverri, E. A., & Vergara, D. (2024). Strategies for reducing automobile fuel consumption. Applied Scienc-es, 14(2), 910. https://doi.org/10.3390/app14020910.
    6. Katz, J. (2021). Aerodynamics in motorsports. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 235(4), 324-338. https://doi.org/10.1177/1754337119893226.
    7. Akin, L. (2024). Data-Driven Vehicle Performance Optimization for Formula Student Racing (Doctoral dissertation, Politecnico di Torino).
    8. Bao, G. (2024). Design and Implementation of Gesture Music Composition System based on RealSense and Recurrent Neural Network. Journal of Wireless Mobile Networks, Ubiquitous Computing, and Dependable Applications, 15(3), 501-520. https://doi.org/10.58346/JOWUA.2024.I3.032.
    9. Alsyoof, M. (2024). Electric Sports Car Preliminary Design (Performance Envelope) (Doctoral dissertation, Purdue University Graduate School).
    10. Pavlenko, A., Askarbekuly, N., Megha, S., & Mazzara, M. (2020). Micro-frontends: application of microservices to web front-ends. Journal of Inter-net Services and Information Security, 10(2), 49-66.
    11. Zhang, T., Sun, Y., Wang, Y., Li, B., Tian, Y., & Wang, F. Y. (2024). A survey of vehicle dynamics modeling methods for autonomous racing: Theoret-ical models, physical/virtual platforms, and perspectives. IEEE Transactions on Intelligent Vehicles. https://doi.org/10.1109/TIV.2024.3351131.
    12. Arduini, S., Manzo, M., & Beck, T. (2024). Corporate reputation and culture: the link between knowledge management and sustainability. Journal of Knowledge Management, 28(4), 1020-1041. https://doi.org/10.1108/JKM-02-2023-0139.
    13. Candela, A., Sandrini, G., Gadola, M., Chindamo, D., & Magri, P. (2024). Lightweighting in the automotive industry as a measure for energy effi-ciency: Review of the primary materials and methods. Heliyon. https://doi.org/10.1016/j.heliyon.2024.e29728.
    14. Rangarajan, K., & Velayudhan, G. (2024). Enhancing Aerodynamic Performance of a Formula Car through Modification and Evaluation (No. 2023-01-5167). SAE Technical Paper. https://doi.org/10.4271/2023-01-5167.
    15. Birut, A., Wójcik, P., Niedworok, A., Dziki, R., Orzech, Ł., Janicka, A., & Magdziak-Tokłowicz, M. (2024). Performance analysis of electric motor for Formula Student race car. Combustion Engines, 81. https://doi.org/10.19206/CE-189938.
    16. Ligasacchi, E., Grassi, D., Riccobene, L., Savino, A., & Zanotti, A. (2024). Experimental–numerical investigation of aerodynamic effects produced by the rear wing mainplane deformation in a Formula 1 racing vehicle. Sports Engineering, 27(2), 33. https://doi.org/10.1007/s12283-024-00476-2.
    17. Kavitha, M. (2025). Breaking the silicon ceiling: A comparative analysis of women’s leadership and participation in AI startups across global innova-tion hubs. Journal of Women, Innovation, and Technological Empowerment, 1(1), 1–6.
    18. Abdullah, D. (2025). Topology optimization of composite structures for enhanced crash energy absorption: Mitigating non-uniform stress distributions in crashworthy designs. Advances in Mechanical Engineering and Applications, 1(2), 1–10.
    19. Surendar, A. (2025). Wearable sensor analysis of biomechanics in Yoga Asanas for posture correction. Journal of Yoga, Sports, and Health Sciences, 1(2), 1–7.
    20. Unciano, N., & Khan, Z. (2025). AI-enabled digital twin framework for predictive maintenance in smart urban infrastructure. Journal of Smart Infra-structure and Environmental Sustainability, 2(1), 1–10.
    21. Patel, P., & Dusi, P. (2025). Activation patterns in the prefrontal cortex during moral judgments: Evidence from EEG analysis. Advances in Cognitive and Neural Studies, 1(1), 11–19.
    22. Barhoumia, E. M., & Khan, Z. (2025). Predictive analysis of climate change impact using multiphysics simulation models. Bridge: Journal of Multi-disciplinary Explorations, 1(1), 23–30.
    23. Patel, P., & Dus, P. (2025). Hybrid energy storage system architectures for grid and electric vehicle integration: Enhancing efficiency, reliability, and scalability. Transactions on Energy Storage Systems and Innovation, 1(2), 10–17.
    24. Egash, D., & Fatem, B. F. (2025). Digital twin-enabled predictive control of electrical machines and converters. National Journal of Electrical Ma-chines & Power Conversion, 1(3), 16–23.
    25. Shrirao, N. M., & Tamrakar, G. (2025). Emerging power electronics architectures for battery management and renewable energy integration in smart grid systems. Transactions on Power Electronics and Renewable Energy Systems, 1(4), 10–16.
    26. Prabhakar, C. P., & Shrirao, N. M. (2025). Comparative simulation study of SiC and GaN power devices in high-efficiency motor drive applications. National Journal of Electric Drives and Control Systems, 1(3), 24–32.
    27. Fatem, B. F., & Urebe, J. (2025). A secure boot and firmware update framework for ARM Cortex-M microcontrollers in industrial IoT environments. Progress in Electronics and Communication Engineering, 3(2), 62–68.

  • Downloads

  • How to Cite

    Mishra, D. N. ., Afzal , M. ., & Kumar , V. . (2025). Optimizing Performance in Motorsport and Racing Vehicles‎Through Advanced Aerodynamics and Materials. International Journal of Basic and Applied Sciences, 14(SI-1), 400-403. https://doi.org/10.14419/13g5rk71