Correlation of physical and mechanical properties with ultrasonic pulse velocities of sandstones in Çenedağ, Kocaeli-Turkey

  • Authors

    • Metin AÅŸcı Kocaeli University
    • Ä°smail Kaplanvural Kocaeli University
    • Ahmet KarakaÅŸ Kocaeli University
    • Özgün Kamil Åžahin T.P.A.O Ankara
    • Cengiz KurtuluÅŸ Kocaeli University
    2017-11-01
    https://doi.org/10.14419/ijag.v5i2.8372
  • Uniaxial Compressive Strength (UCS), Ultrasonic Pulse Velocity (UPV), Point Load Index (Is (50)), Schmidt Hardness (RN), ÇenedaÄŸ Sandstone.
  • Correlation of physical and mechanical properties with ultrasonic pulse velocities (UPV) of sandstones in ÇenedaÄŸ, Kocaeli-Turkey, NW was performed in this study. Physical and mechanical properties were defined and the relationships among the uniaxial compressive strength (UCS), porosity, void ratio, point load strength index Is(50),Schmidt hardness (RN) and bulk mass density by weight with ultrasonic pulse velocity of pink and cream colored sandstone unit of Lower Ordovician ÇenedaÄŸ formation were investigated. In the scope of this research, 16 sandstone specimens were collected from various locations of ÇenedaÄŸ formation in ÇenedaÄŸ-Kocaeli, Turkey and laboratory experiments were implemented. Later, the statistical correlations were performed by regression analysis to evaluate the relationships between these properties and ultrasonic pulse velocity. Reasonably good correlations were determined between the UPV and physical and mechanical properties.

  • References

    1. [1] Altınlı, İ.E. (1968). İzmit-Hereke Kurucadağ Alanının Jeoloji İncelemesi. MTA Dergisi, 71, 1-26 (in Turkish).

      [2] ASTM (1978). Standard method for laboratory determination of pulse velocities and ultrasonic elastic constants of rocks. Annual Book of ASTM Standards, Part 19, D. 2845-69:356–36.

      [3] ASTM (2001). Standard practice for preparing rock core specimens and determining dimensional and shape tolerances. American Society for Testing and Materials. D4543.

      [4] ASTM (2008). Standard Practices for Preparing Rock Core as Cylindrical Test Specimens and verifying Conformance to Dimensional and Shape Tolerances. D4543-08.

      [5] ASTM (2010). Standard Test Method for Compressive Strength and Elastic Moduli of Intact Rock Core specimens under varying States of Stress and Temperatures. D7012-10.

      [6] Başarır H., Kumral M., Özsan, A. (2004).Kayaçların tek eksenlibasınç dayanımının basit deney yöntemleriyle tahmini. KAYAMEK′2004-VII. Bölgesel Kaya Mekaniği Sempozyumu (In Turkish).

      [7] Bieniawski, Z.T. (1975). The point-load test in geotechnical practice. Engineering Geology, Vol 9. Pergamon Press, pp. 669-697. https://doi.org/10.1016/0013-7952(75)90024-1.

      [8] Broch, E., Franklin, J.A. (1972). The point-load strength test. International Journal of Rock Mechanics and Mining Sciences, Vol 9. Pergamon Press pp. 669–697. https://doi.org/10.1016/0148-9062(72)90030-7.

      [9] Cargill, J.S., Shakoor, A. (1990). Evaluation of empirical methods for measuring uniaxial compressive strength of rock. Int. J. Rock Mec. Min. Sci. 27(6), 495-503. https://doi.org/10.1016/0148-9062(90)91001-N.

      [10] Chou, K.T., Wong, R.H.C. (1996). Uniaxial compressive strength and point load strength. Int. J. Rock. Mec. Min. Sci. 33, 183-188. https://doi.org/10.1016/0148-9062(95)00056-9.

      [11] Çakır, Ş. (2000).Demirciler–Sadıklar–Gündoğdu–Tütünçiftlik (Kocaeli) Bölgesinin Jeolojisi. KOÜ Fen Bilimleri Enstitüsü Doktora Tezi (Yayınlanmamış), İzmit (In Turkish)

      [12] D’Andrea, D.V., Fisher, R.L., Fogelson, D.E. (1964). Prediction of compression strength from other rock properties. Colo. Sch. Mines Q. v: 59(4B), 623–40.

      [13] Forster, I.R. (1983). The influence of core specimen geometry on the axial point-load test. Int. J Rock MechSci20, 291-295. https://doi.org/10.1016/0148-9062(83)90599-5.

      [14] Göktan, R.M. (1988). A theoretical and practical analysis of rock rippability. Ph.D. thesis ITU Institute of Appl. Sciences, p.108 (in Turkish).

      [15] Grasso, P., Xu, S., Mahtab, A. (1992). Problems and promises of index testing of rocks. Proc. 33rd US Symp. Rock Mech., Santa Fe, NM, Balkema, Rotterdam, 3-5 June 1992, 879-888.

      [16] Gunsallus, K.L., Kulhawy, F.H. (1984). A comparative evaluation of rock strength measures. Int. J. Rock Mech. Min. Sci. 21, 233-248. https://doi.org/10.1016/0148-9062(84)92680-9.

      [17] Hassani, F.P., Scoble, M.J.J, Whittaker, B.N. (1980). Application of point-load index test to strength determination of rock and proposal for new size-correction chart. D. A. Summers (Editor), Proc. 21st US Symp.. Rock Mech., Rolla, Missouri, 1980, 543-553.

      [17]

      [18] Inoue, M.,Ohomi, M. (1981). Relation between uniaxial compressive strength and elastic wave velocity of soft rock. Proc. Int. Sym. on Weak Rock, Tokyo, pp. 9-13.

      [19] ISRM (2007). The Complete ISRM Suggested Methods for Rock Characterization, Testing and Monitoring: 1974-2006. (Editors: Ulusay R. and Hudson JA), Kozan Ofset Matbaacılık Ankara.

      [20] ISRM (1981). Rock characterization testing & monitoring. ISRM Suggested Methods, New York: Pergamon Press, p.211 Editor: Brown ET.

      [21] Kahraman, S. (1996).Basınç tahmininde Schmidt ve nokta yük indeksi kullanmanın güvenilirliği. K.T.U. Jeoloji Mühendisliği Bölümü, vol. 30 Yıl Sempozyumu. Bildiriler Kitabı, Trabzon, pp. 362-369. (In Turkish).

      [22] Kahraman, S. (2001). Evaluation of simple method for assessing the uniaxial compressive strength of rock. Int. J. Rock Mech. Min. Sci., Geomechanics Abstract, 38, 981-994. https://doi.org/10.1016/S1365-1609(01)00039-9.

      [23] Kahraman, S., Yeken, T. (2008). Determination of physical properties of carbonate rocks from P-wave velocity. Bull.Eng.Geol.Environ, v.67, p.277-281. https://doi.org/10.1007/s10064-008-0139-0.

      [24] Kaya, O. (1978). İstanbul Ordovisiyeni ve Silüriyeni. H.Ü. Yerbilimleri Dergisi, cilt 4, 1-2, 1-22. (In Turkish).

      [25] Kurtuluş, C.,Çakır, Ş. (2009).Çenedağ Formasyonu (Alt Triyas) Kumtaşlarının Fiziksel Özelliklerinin P-Dalgahızı Ölçümleri ile Belirlenmesi, Uygulamalı Yerbilimleri., Haziran 2009. s. 18-24. (In Turkish).

      [26] KurtuluÅŸ, C., Bozkurt, A,, EndeÅŸ, H. (2011). The physical and mechanical properties of serpentinized ultrabasic rocks in NW Turkey. Pure and Applied Geophysics, Volume 169, Issue 7, pp 1205-1215.

      [27] Read, J.R.L., Thornten, P.N., Regan, W.M. (1980). A rational approach to the point load test. Proc. 3rd Australian-New Zealand Geomechanics Conference, vol. 2, p.35-39

      [28] Yaşar, E., Erdoğan, Y. (2004). Correlating sound velocity with the density, compressive strength and Young’s modulus of carbonate rocks. Int. J. Rock Mech. Min. Sci., 2004, vol 41, pp. 871-875. https://doi.org/10.1016/j.ijrmms.2004.01.012.

  • Downloads

  • How to Cite

    Aşcı, M., Kaplanvural, İsmail, Karakaş, A., Şahin, Özgün K., & Kurtuluş, C. (2017). Correlation of physical and mechanical properties with ultrasonic pulse velocities of sandstones in Çenedağ, Kocaeli-Turkey. International Journal of Advanced Geosciences, 5(2), 109-115. https://doi.org/10.14419/ijag.v5i2.8372