Vol 3, No 2 (2014)

Table of Contents


Articles


Design of Multimodel based MPC and IMC control schemes applied to injection molding machine

Kanaga Lakshmi, D. Manamalli, M. Mohamed Rafiq Pages: 82-92

DOI: 10.14419/ijet.v3i2.1844

Frequency analysis of annual one day to five consecutive days maximum rainfall for Gandak river basin

Shivika Singla, Raktim Halder, Rakesh Khosa, Rumani Singla, Rudraksh Rajeev Pages: 93-98

DOI: 10.14419/ijet.v3i2.1803

PI/backstepping control of snake robot optimazed by genetic algorithm

Maryam Jafari, Aref Shahmansoorian Pages: 99-105

DOI: 10.14419/ijet.v3i2.1954

Design and simulation of bio fluidic sensor based on photonic crystal

Rajini Gaddam Kesava Reddy, Sharmila Ashok kumar, Sankardoss Varadhan Pages: 106-112

DOI: 10.14419/ijet.v3i2.1691

Identification, development and testing of thermal error compensation model for a headstock assembly of CNC turning centre

Ramesh Babu, V.Prabhu Raja, J. Kanchana, Devara Venkata Krishna Pages: 113-122

DOI: 10.14419/ijet.v3i2.2012

Evaluation of engine performance, emissions, of a twin cylinder diesel engine fuelled with waste plastic oil and diesel blends with a fraction of methanol

Y. Tarun, C. Thamotharan, K. Mukherjee Pages: 123-128

DOI: 10.14419/ijet.v3i2.2096

Numerical simulation and analytical study of glulam timber beams

Themistoklis Tsalkatidis Pages: 129-136

DOI: 10.14419/ijet.v3i2.2140

Seismic evaluation and studying the effect of friction damper

Mahmood Miri, Aidin Kahkeshan Pages: 137-154

DOI: 10.14419/ijet.v3i2.2040

Optimal attitude determination method in presence of noise and bias on different star sensors

Amir Moghtadaei Rad Pages: 155-165

DOI: 10.14419/ijet.v3i2.2216

The critical period of reservoir systems considering performance indices on Malaysia rivers

Issa Saket Oskoui, Rozi Abdullah, Majid Montaseri Pages: 166-173

DOI: 10.14419/ijet.v3i2.2250

Linear modeling and regression for exponential engineering functions by a generalized ordinary least squares method

Yaser Abdelhadi Pages: 174-178

DOI: 10.14419/ijet.v3i2.2023

Waste energy recovery in window air conditioning system

R. Sasidharan, V. Palaniswamy, C.R. Manibharathi, R. Pannerselvam, N. Venkatesan Pages: 179-184

DOI: 10.14419/ijet.v3i2.1821

A survey of GFRP composite leaf spring

S. Rajesh, S. Nakkeran, GB. Bhaskar Pages: 185-193

DOI: 10.14419/ijet.v3i2.1811

Design and development of human factors based shoe midsole using additive manufacturing

D. Rambabu, R Hariharan, A. Karthik Nambi, R. Nataraj, GB. Bhaskar Pages: 194-200

DOI: 10.14419/ijet.v3i2.1823

Weight reduction of a standard brake drum: A design approach

D. Rambabu, R Gopinath, U. Senthil rajan, G.B. Bhaskar Pages: 201-207

DOI: 10.14419/ijet.v3i2.1822

Design and fabrication of magnetic shock absorber

S. Gopinath, R.J. Golden Renjith, J. Dineshkumar Pages: 208-211

DOI: 10.14419/ijet.v3i2.1831

Parametric optimization of wire cut electrical discharge machining

M. Durairaj, A.K.S. Ansari, M. H. Gauthamkumar Pages: 212-215

DOI: 10.14419/ijet.v3i2.1807

Thermal analysis of metal-ceramic bonding using finite element method

S. Gopinath, R Sabarish, R. Sasidharan Pages: 216-219

DOI: 10.14419/ijet.v3i2.1830

Fabrication of pedal powered hacksaw using dual chain drive

R. Subash, CM Meenakshi, K. Samuel Jayakaran, C. Venkateswaran, R. Sasidharan Pages: 220-223

DOI: 10.14419/ijet.v3i2.1813

Developing a forecasting model of concrete compressive strength using relevance vector machines

Mohammad Awwad Pages: 224-229

DOI: 10.14419/ijet.v3i2.2011

Selection of alternative material for common rail direct injection system

N. Senguttuvan, S Raja, R. Sasidharan Pages: 230-236

DOI: 10.14419/ijet.v3i2.1810

An efficient quantum based routing protocol with local link failure recovery algorithm for manet

Jasmine Jeni, Vimala Juliet, Messiah Bose Pages: 237-244

DOI: 10.14419/ijet.v3i2.2318

Effect of substrate on the electro chromic properties of tungsten trioxide thin films

Vidya Prabhakar, Ashrit P Pages: 245-251

DOI: 10.14419/ijet.v3i2.2084

A proposed fuel cell vehicle for reducing CO2 emissions and its contribution to reducing greenhouse gas emissions

Mohamed Mourad Pages: 252-261

DOI: 10.14419/ijet.v3i2.2349

Analysis of image quality metric for ROI using image restoration techniques

Syed Amma Sheik Pages: 262-267

DOI: 10.14419/ijet.v3i2.2359

Compression and impact characterization of helical and slotted cylinder springs

Ahmed Ibrahim Razooqi, Hani Aziz Ameen, Kadhim Mijbel Mashloosh Pages: 268-278

DOI: 10.14419/ijet.v3i2.2492

Design and construction of a microcontroller-based heartbeat monitoring device with display

Ernest Onuiri, Nissi Madu, Boluwatife Adeagbo, Iniobong Johnson, Oludele Awodele Pages: 279-289

DOI: 10.14419/ijet.v3i2.2342
science

Copyright © 2017 Science Publishing Corporation Inc. All rights reserved.