Vol. 8 No. 1.1 (2019): Special Issue 1

Conference Name: Mechanical Engineering, Science and Technology (MEST2018)
Start date: 26 September 2018
End date: 27 September 2018
Country: Malaysia

Published: 24-01-2019

Articles

Converting Relational Database into Temporal Database
Yogiek Indra Kurniawan, Kusuma Ayu Laksitowening, Ade Romadhony, Muhammad Fachrie, Dimas Aryo Anggoro

https://doi.org/10.14419/ijet.v8i1.1.24651

143-148
Mobile Instant Messaging and Its Potential to Reduce Anxiety in English as a Foreign Language Speaking Class
Dzul Rachman, Sunarti .

https://doi.org/10.14419/ijet.v8i1.1.24652

149-153
Learning Media based on Augmented Reality Game
Endah Sudarmilah, Nurul Ustia, Dony Nuryanto Bakhtiar

https://doi.org/10.14419/ijet.v8i1.1.24653

154-157
The Usage of Online Dictionary and Translation among Student in University
Khusnul Khatimah, Yeni Rahmawati, Dzul Rachman, Rani Herning Puspita

https://doi.org/10.14419/ijet.v8i1.1.24654

158-164
Fake Gold: Gold Purity Measurement Using Non Destructive Method
Fazrul Mohd Nor, Abd Rahman Tamuri, Abd Khamim Ismail

https://doi.org/10.14419/ijet.v8i1.1.24655

165-172
Classification Of Butterfly Species Based On Venasi Using Support Vector Machine
Asslia Johar Latipah, Gunawan Ariyanto, Rofilde Hasudungan, Nani Nurul Fatihah

https://doi.org/10.14419/ijet.v8i1.1.24656

173-176
Bio-Mechanical Pulping of Bacteria Pre-Treatment on Oil Palm Biomass for Handsheet Production
Sharfina Mutia Syarifah, Angzzas Sari Mohd Kassim, Ashuvila Mohd Aripin, Nadiah Ishak, Ayeronfe Fadilat, Sharmiza Adnan

https://doi.org/10.14419/ijet.v8i1.1.24657

177-183
The Influences of Normal Load Variation in Direct Shear Strength Test Parameters Tuff from Candi Ijo Yogyakarta
Singgih Saptono, Rahmatyo Gilang Trilaksono, Waluyo Adi Siswanto

https://doi.org/10.14419/ijet.v8i1.1.24658

184-189
Analysis of Casting Time on Jointed Plain Concrete Pavement
Rusandi Noor, Feri Muhammad, Isnaini Zulkarnain

https://doi.org/10.14419/ijet.v8i1.1.24659

190-200
The Effects of using Stepped Cascade Aeration and Multimedia Filter System for Iron Removal in Groundwater
E Z Radzi, M. S Wahab, M Z Sahdan, R Hamdan, A A Raus

https://doi.org/10.14419/ijet.v8i1.1.24660

201-206
Utilization of Styrofoam-Matrix for Coarse Aggregate to Produce Lightweight Concrete
Muhammad Noor Asnan, Rusandi Noor, Rafidah Azzahra

https://doi.org/10.14419/ijet.v8i1.1.24661

207-212
Evaluation of the Suitability of the Implementation of the Project in Contracts Quality Plan
Isnaini Zulkarnain, Rusandi Noor, Pitoyo .

https://doi.org/10.14419/ijet.v8i1.1.24662

213-221
CantasR A Green Technology for Oil Palm Harvesting and Customer Satisfaction towards Services Quality of CantasR Suppliers in Malaysia
Zainon Mat Sharif, Nurul Jannah Jalil, . .

https://doi.org/10.14419/ijet.v8i1.1.24663

222-227
Green Building, Sustainability and Mosques Design in Kuala Terengganu
Zainon Mat Sharif, Nurul Jannah Jalil, Hussain Ali Bekhet

https://doi.org/10.14419/ijet.v8i1.1.24664

228-234
Optimization of Injection Molding Parameters for WC-TaC-6Co
M. Prathabrao, S. Y.M. Amin, M. H.I. Ibrahim, M. H. Othman, S. N.A. Shahbudin

https://doi.org/10.14419/ijet.v8i1.1.24773

1-5
Development of Drum Brake Pad Material Motorcycle Based Composite Hazelnut Shells, Aluminum and Pineapple Leaf Fibers with Polyurethane Matrix
Ikhwansyah Isranuri, Jepri Adan Silalahi, Basuki Wirjosentono, Warman .

https://doi.org/10.14419/ijet.v8i1.1.24774

6-12
Biomimicry â€“ Core Stages, Design Process, and Gaps
Chin Toong Foo, Badrul Omar, Azlis-Sani Jalil

https://doi.org/10.14419/ijet.v8i1.1.24775

15-25
A Conceptual Framework on the Green Synthesis of Metal Nanoparticles using Soap Nuts
Praveena Nair Sivasankaran, Ainon Shakila, Tan Sin Jin

https://doi.org/10.14419/ijet.v8i1.1.24776

26-30
The DTA Curves for Melting of Hypereutectic AlSi Alloy
M. S. Wahab, Aqeel Ahmed, A. A. Raus, K. Kamarudin, E. Z. Radzi

https://doi.org/10.14419/ijet.v8i1.1.24777

31-35
Gradient Lattice Structure Bio Mimicry Design Configurations for Additive Manufacturing
Asliah Seharing, Abdul Hadi Azman, Shahrum Abdullah

https://doi.org/10.14419/ijet.v8i1.1.24778

36-43
Chromium Carbonitride (CrCN) Coatings on SUS 316L with Potential Application as Bipolar Plate in PEMFC
Nur Fawwaz Asri, Teuku Husaini, Abu Bakar Sulong, Edy Herianto Majlan, Wan Ramli Wan Daud, Bushroa Abdul Razak, Nabilah Afiqah Mohd Radzuan

https://doi.org/10.14419/ijet.v8i1.1.24779

44-52
Study of Subsonic Airfoil Based on the Assessment of Lift- To-Drag (L/D) Force Ratio
Nur Hasalli Hj Ibrahim, Mohamad Dzulhelmy bin Amari, Zainon Sharmila Shamsuddin

https://doi.org/10.14419/ijet.v8i1.1.24780

53-58
Impact Analysis and Modification of Front Inner Bumper
Waluyo Adi Siswanto, Tan Kang Teng, Salihatun Md Salleh, Binyamin .

https://doi.org/10.14419/ijet.v8i1.1.24781

59-65
The Impact of Multi-Nozzles Array on Entrainment Mass Flow Rate and Homogeneity of the Speed and Profiles of Heat
Sarjito ., Denis Marchant, Yufeng Yao, Binyamin .

https://doi.org/10.14419/ijet.v8i1.1.24782

66-70
Occupational Safety and Health (O.S.H) Towards Green Environment Practices at Malaysia Small and Medium Manufacturing Sector
Khoo Nee kah, Hanipah Hussin, Norida Abdullah

https://doi.org/10.14419/ijet.v8i1.1.24783

70-79
Experimental Study on the Degree of Surface Generation by Edge Preparation Tools in Milling 316L
Rasidi Ibrahim, Chong Yee Long, Chee Yung Ng, Noor Hakim Rafai, Mohammad Sukri Mustapa, Al Emran Ismail

https://doi.org/10.14419/ijet.v8i1.1.24784

80-88
Parameters Optimization Development on Relative Density and Compression Strength of AlSi10Mg Sample Produced by Selective Laser Melting using Response Surface Method.
M S Wahab, A A Raus, M Ibrahim, K. Kamarudin, Ahmed Aqeel, E Z Radzi, I M Amir

https://doi.org/10.14419/ijet.v8i1.1.24785

89-97
Analysis on NOX Formation of Biofuels
M. A. Amiruddin, A. H. Abdul Rasib

https://doi.org/10.14419/ijet.v8i1.1.24786

98-103
Identify the Influence of Ingredients and Cake Baking for Cupcake using Design of Experiments
Anis Siti Nurrohkayati, Binyamin .

https://doi.org/10.14419/ijet.v8i1.1.24787

104-110
The Effect of Powder Metallurgy Parameters on Electrical Conductivity of Copper-Nickel-Tungsten Electrode
A. M. Sabri, M. Zulafif Rahim, M. A. Haikal Ahmad, N. H. Azis, M. Rasidi Ibrahim, Ahmad Mubarak Tajul Arifin, Al Emran Ismail

https://doi.org/10.14419/ijet.v8i1.1.24788

111-116
The Characteristics of the Computer Supported Collaborative Learning (CSCL) through Moodle: a View on Studentsâ€™ knowledge Construction Process
Suhaizal Hashim, Mohd Erfy Ismail, Affero Ismail, Alias Masek, Irwan Mahazir Ismail, Nizamuddin Razali, Mohd Ali Samsudin

https://doi.org/10.14419/ijet.v8i1.1.24789

117-122
The Evaluation of Web-based English Language Learning Media for Nursing Students
Abdul Halim, Asslia Johar Latipah

https://doi.org/10.14419/ijet.v8i1.1.24790

123-128
Design and Development of Augmented Reality Teaching Kit: In TVET Learning Context
Mohd Erfy Ismail, Anies Faziehan Zakaria, Irwan Mahazir Ismail, asyamuddin Othman, Mohd Ali Samsudin, Pipit Utami

https://doi.org/10.14419/ijet.v8i1.1.24791

129-134
Development of an Embedded Palm Vein Imaging Prototype
Zarina Mohd Noh, Abdul Rahman Ramli, Marsyita Hanafi, M Iqbal Saripan, Ridza Azri Ramlee

https://doi.org/10.14419/ijet.v8i1.1.24792

135-142