Vol 4, No 1 (2015)

Table of Contents


Climate change impact on meteorological droughts in watershed scale (case study: southwestern Iran)

Alireza Nikbakht Shahbazi Pages: 1-11

DOI: 10.14419/ijet.v4i1.3782

Lifecycle assessment of a stapling machine

Israel Dunmade Pages: 12-19

DOI: 10.14419/ijet.v4i1.3813

Operational and environmental evaluation of traffic movement on urban streets using GPS floating-car data

Ahmed Elkafoury, Abdelazim Negm, Mohamed Hafez, Mahmoud Bady, Teijiro Ichimurac Pages: 20-25

DOI: 10.14419/ijet.v4i1.3794

Mechanical and metallurgical properties of DP 1000 steel square butt welded joints with GMAW

Ianto Rocha, Ivan Machado, Cintia Mazzaferro Pages: 26-34

DOI: 10.14419/ijet.v4i1.3928

The impact of the concepts of lean manufacturing on the strategies of the supply chain

Jaouad Kazmane, Anas Chafi, Ikram Tajri, Abdelali En-nadi Pages: 35-47

DOI: 10.14419/ijet.v4i1.3936

Developing an approach for decision making units integration using multi objective particle swarm optimization

Abdorrahman Haeri, Kamran Rezaie, Seyed Morteza Hatefi Pages: 48-53

DOI: 10.14419/ijet.v4i1.3775

Faults diagnosis and assessment of transformer insulation oil quality: intelligent methods based on dissolved gas analysis a-review

Ahmed Raisan, M.M Yaacob, Malik Abdulrazzaq Alsaedi Pages: 54-60

DOI: 10.14419/ijet.v4i1.3941

Numerical simulation of air–water two–phase flow in vertical pipe using k-ε model

Ali Sanati Pages: 61-70

DOI: 10.14419/ijet.v4i1.3965

Comparative of wear resistance of low carbon steel pack carburizing using different media

Kharia Salman Hassan Pages: 71-77

DOI: 10.14419/ijet.v4i1.3866

Smart metering application for power efficiency studies

Cristian Tudoran, Stefan Albert, Dorin N. Dadarlat, Carmen Tripon, Sorin Dan Anghel Pages: 78-89

DOI: 10.14419/ijet.v4i1.4154

Easily usable human-device interface for microwave therapy apparatus

Vasile Surducan, Emanoil Surducan, Camelia Neamtu, Nicolae Dadarlat, Radu Ciupa Pages: 90-96

DOI: 10.14419/ijet.v4i1.4159

Software defined radio platform with wideband tunable front end

Daniel Iancu, John Glossner, Gary Nacer, Stuart Stanley, Vitaly Kolashnikov, Joe Hoane Pages: 97-103

DOI: 10.14419/ijet.v4i1.4160

Design and implementation of data collection module for WSN application

Valentina Markova, Teodora Trifonova, Venceslav Draganov Pages: 104-112

DOI: 10.14419/ijet.v4i1.4161

Proposing a model for absorption capacity of technology

Hossein Gholizadeh, Ali Bonyadi Naeini, Alireza Moini Pages: 113-124

DOI: 10.14419/ijet.v4i1.4010

A frame for a computer aided inspection planning system

Wilma Polini, Giovanni Moroni Pages: 125-138

DOI: 10.14419/ijet.v4i1.3937

To model bolted parts for tolerance analysis using variational model

Wilma Polini, Massimiliano Marziale Pages: 139-148

DOI: 10.14419/ijet.v4i1.3962

Experimental analysis on metallic foams-a response surface methodology approach

Osama Ibrahim Abd Pages: 149-160

DOI: 10.14419/ijet.v4i1.4033

Evaluation of explosion loading effects on concrete infrastructures using ABAQUS software

Abolfazl Rahimi Pages: 161-168

DOI: 10.14419/ijet.v4i1.3947

Investigation of applying dampers in elevated water tanks using time-history analysis

Ehsan Rajaie Pages: 169-186

DOI: 10.14419/ijet.v4i1.3950

Development technique for deep drawing without blank holder to produce circular cup of brass alloy

Ali Hassan Saleh, Ammer Khalaf Ali Pages: 187-195

DOI: 10.14419/ijet.v4i1.3516

Identification and analysis of noise sources in the Noor-Abad gas compressor station, Iran

Nader Mohammadi, Kami Mohammadi Pages: 196-204

DOI: 10.14419/ijet.v4i1.4092

Non-linear study of base shear and moment of composite columns in MRFs

Amir Parviz Khosravi Amiri Pages: 205-208

DOI: 10.14419/ijet.v4i1.4144

Experimental investigation of dispersion phenomenon in a fractured porous medium

Ali Sanati, Mohammad Yousefi Khoshdaregi Pages: 209-213

DOI: 10.14419/ijet.v4i1.4136

Heat and mass transfer in binary film evaporation and condensation in vertical channel

Abdelaziz Nasr, Abdulmajeed S. Al-Ghamdi Pages: 214-226

DOI: 10.14419/ijet.v4i1.4082

Study the influence of a new ball burnishing technique on the surface roughness of AISI 1018 low carbon steel

Abd Alkader Ibrahim, Tamer Khalil, Tarik Tawfeek Pages: 227-232

DOI: 10.14419/ijet.v4i1.4181

A quantitative model of technological catch-up

Hossein Gholizadeh, Ali Bonyadi Naeini, Alireza Moini Pages: 233-243

DOI: 10.14419/ijet.v4i1.4203

Development of combined back propagation algorithm and radial basis function for diagnosing depression patients

Bhuvana R., Purushothaman S., Rajeswari R., Balaji R.G. Pages: 244-249

DOI: 10.14419/ijet.v4i1.4201

Copyright © 2022 Science Publishing Corporation Inc. All rights reserved.