Design and implementation of data collection module for WSN application

Authors and Affiliations

  • Valentina Markova Technical University of Varna, Department of Telecommunications, Varna
  • Teodora Trifonova
  • Venceslav Draganov

About this article

Download PDF

Keywords:

Circuit Design, Data Collection, Sensor Systems, Wireless Sensor Network, Software Design.

Abstract

This paper presents the design and implementation of universal low cost data collection module (DCM), which is an essential part of remote monitoring system based on wireless sensor network. The proposed module expands the capabilities of a measuring node for collecting data from greater number of sensors. The DCM includes four parts: one group multiplexers for data acquisition, second group multiplexers for power management, voltage to current converters and DC/DC converters. The universal DC/DC converters provide autonomous power supply for the sensors and the multiplexers, which can be turned on or off for a certain period of time. The data collecting, monitoring and logging functions are realized through a LabVIEW project.The proper operation and the reliable performance of the system were proved by practical experiment. The proposed module makes the WSN-based system a versatile solution for a variety of monitoring applications.

References

Peng, Y., Yong, X., Peng, X.Y., “GEMS: A WSN-based greenhouse environment monitoring system”, IEEE Conf. I2MTC’2011, Graz, Ausria, 10-12 May2011, pp.1-6, 10.1109/IMTC.2011.5944132

Zuo, X., Gao, W., Zhang, G., Zhao, J., Xia, D., “Design of environmental parameters monitoring system for watermelon seedlings based on wireless sensor networks”, Intern. Journal Applied Mathematics&Information, 2011, 5, (2), pp.243-250

Gomez, C., Paradells J., Caballero, J., ”Sensors everywhere: wireless network technologies and solutions”, F.V.E., Spain, 2010

Stamatescu, G., Sgarciu V.,“Integration of wireless sensor networks with virtual instrumentation in a residential environment “, U.P.B. Sci. Bull., 2013, 75, (2), pp.41-52

NI:‘NI Wireless sensor network’ , http://www.ni.com/wsn/

View more references (6)

Trifonova T., Markova V., V. Draganov, K. Angelova,V. Dimitrov, “Smart sensor network for ergonomic evaluation of working environment” , Proc. XLVIII Int.conf. ICEST2013, Ohrid, Macedonia, vol.1, pp.371-374 June, 2013 http://www.icestconf.org/images/proceedings/icest_2013_01.pdf

Trifonova T, V. Markova, V. Draganov , Development of smart sensor for monitoring relative air humidity in the workplace, Proc. Inter. Conf. ELECTRONICS’ 2013, Sozopol, Sept 2013

ADG408 datasheet: http://www.analog.com/static/imported-files/data_sheets/ADG408_409.pdf

HEF4051B datasheet: http://www.nxp.com/documents/data_sheet/HEF4051B.pdf

MCP1252 datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/21752a.pdf

MAX680 datasheet: http://datasheets.maximintegrated.com/en/ds/MAX680-MAX681.pdf


How to Cite

Markova, V., Trifonova, T., & Draganov, V. (2015). Design and implementation of data collection module for WSN application. International Journal of Engineering and Technology, 4(1), 104-112. https://doi.org/10.14419/ijet.v4i1.4161