Vol. 9 No. 2 (2020)

Articles

• Simulation of a stochastic multi-echelon distribution supply chain under a continuous inventory control policy

  • 

  Hamid Ech-cheikh, Abdessamad Douraid, Khalid El Had

  262-271

• Security of cloud computing: belongings for the generations

  • 

  Jahangir Jabbar, Hussain Mehmood, Hassaan Malik

  454-457

• Digital Campus

  • 

  Siti Nur Ain Basri, Faridahanim Ahmad, Nur Izie Adiana Abidin, Ishak Baba, Hasnida Harun, Nor Hazren Abdul Hamid, Mariah Awang, Muhammad Ashraf Abdul Rahman, Muhammad Kamaruzaman Musa, Nuramidah Hamidon, Suhaida Ahmad, Suhaila Ahmad, Suhaila Ahmad, Shahrul Azhan Ishak

  382-389

• Design of Low Noise Amplifier for WLAN using pHEMT

  • 

  G. Thirunavukkarasu, G. Murugesan

  272-277

• Performance analysis of static wireless body area network for different routing protocols

  • 

  Shilpa Vikas Shinde, Dr. Santosh S. Sonavane

  278-283

• Designing of advanced solar absorption chilling unit

  • 

  Ahmed Ullah, Asim Mushtaq, Rizwan Ahmed Qamar, Uddin Ali

  284-298

• Optimal sizing and positioning of grid integrated distributed generator: a review

  • 

  Arpita De

  299-313

• The role of psychological empowerment and job satisfaction on turnover intentions directly and indirectly through affective commitment on registered nurses in healthcare industry of twin cities (Islamabad and Rawalpindi) of Pakistan

  • 

  Nosheen Rafiq, Dr. Syed Haider Ali Shah, Shakeel Sajjad, Saleh Ahmed Salem Alyafei

  314-325

• Novel approach for anti-collision planning optimization in directional wells

  • 

  Abdulrahman Mohamed

  333-341

• Developing a new approach to summarize Arabic text automatically using syntactic and semantic analysis

  • 

  Amal Alkhudari

  342-349

• Reinforcement alternatives for beams under cyclic load

  • 

  Louay A. Aboul-Nour, Ragab S. Mahmoud, Mahmoud A. Khater, Nesma M. Moselhy

  350-358

• Analytical model for prediction of temperature distribution in early age mass concrete

  • 

  Ugwuanyi Donald Chidiebere, Okafor Fidelis Onyebuchi

  359-366

• Design and implementation of accurate frequency estimator depend on deep learning

  • 

  Mohamed Saber, El-sayed M.El-Kenawy

  367-377

• Development of new polymer composite materials for the flooring of rail carriage

  • 

  Zaynitdinova Olmos Irikovich, Rahimov Rustam Vyacheslavovich, Waail Mahmod Lafta, Ruzmetov Yadgor Ozodovich

  378-381

• Effect of linkage design of an elbow implant on micro-motion: a finite element analysis

  • 

  Milad Heidari, Pooyan Rahmanivahid

  390-396

• A design of sequential reversible circuits by reversible gates

  • 

  Issam Andaloussi, Moulay Brahim Sedra

  397-402

• The characteristics of current patterns in the waters of port of Tanjung Emas Semarang

  • 

  Hartanto ., Agust Tjahjono, Rudy Sugiharto

  403-409

• Performance evaluation of PI and PI-fuzzy logic controller FPGA based permanent magnet synchronous motor drive

  • 

  Rajendra Murmu, Arvind Kumar Singh

  410-414

• ECG signal de-noising based on deep learning auto encoder and discrete wavelet transform

  • 

  Aqeel M.Hamad alhussainy, Ammar D. Jasim

  415-423

• MLR institute of technology campus energy monitoring and controlling system with interconnection of grid and solar power

  • 

  M. Sreenivasa reddy, A. Shubhangi Rao, Ch. Sai Prakash

  424-428

• Maturity Framework Analysis ISO 27001: 2013 on Indonesian Higher Education

  • 

  IGN Mantra, Aedah Abd. Rahman, Hoga Saragih

  429-436

• Self-repairing polyethylene fiber-reinforced-concrete with bacillus subtilis bacteria a review

  • 

  Amr G. Ghoneim, Hilal A. Hassan, Louay A. Aboul-Nour

  437-447

• Evaluation of multiplex SYBR green real-time PCR assay for detection of pathogenic Escherichia coli

  • 

  Ema Komalasari, Winiati P. Rahayu, Siti Nurjanah

  448-453

• Redesigning the Borobudur chair to sustain local creative industries: introducing to wangun concept

  • 

  Rahmanu Widayat

  458-463

• Industry 4.0 and smart manufacturing convergence: profiling guidelines for a fourth revolution

  • 

  John Henry Avila, Richard de Jesús Gil-Herrera

  464-473

• Industrial revolution 4.0 and the development of accounting information system: an imaginary dialogue

  • 

  Eko Ganis Sukoharsono

  474-479

• Design and Implementation of Access Door Control with Mo-bile Alert

  • 

  Chijioke Nwogu, Monday Eze, Charles Okunbor

  480-486

• Enhancement of bio-methane production yield from rumen digesta with biodegradable kitchen wastes by co-digestion process

  • 

  Muhammad Rashed Al Mamun, Mahdi Muhammed, Nadira Sultana Urme, Md. Janibul Alam Soeb

  487-493

• Factors affecting the continuation of contractor participation in the tender process for the construction services project at the center for policy research and development and application of technology – research and development agency ministry of pub

  • 

  Novi Arteti, Syafwandi ., Budi Susetyo

  501-508

• Analysis of CBR design value selection methods on flexible pavement design: Colombia case study

  • 

  Otto Mora L., Michel Murillo A., Tiana Rosania A., Abraham Castañeda A., Rosa Pinto C., Andrea Padilla M.

  509-514

• Street space design for bendi in the urban area of a ternate city

  • 

  Andi Arifah Pasri, Sabaruddin ., Abdul Gaus, Mufti Amir Sultan, Najamuddin .

  494-500

• Significant role of internet of things (IoT) for designing smart home automation and privacy issues

  • 

  Dr. Talal Alsharari, Dr. Shayem Saleh Alresheedi, Dr. Abdulaziz Fatani, Dr. Ismail Yaqub Maolood

  515-519

• Influence of workers performance to implementation of security, safety, health, and sustainability

  • 

  Sidiq Arya Putra N.N, Nunung Widyaningsih, Bambang P.K. Bintoro

  520-526

• Lean management implementation difficulties, studies and recommendations

  • 

  Mohammed Jouhri, Aziz Soulhi

  527-533

• Magnetohydrodynamic slip flow and heat transfer over a nonlinear shrinking surface in a heat generating fluid

  • 

  Leli Deswita, Mohamad Mustaqim Junoh, Fadzilah Md Ali, Roslinda Nazar, Ioan Pop

  534-540

• Conflict matrix as a mechanism of identifying the conflict in emotions of written text

  • 

  Abbasi Mohsin Manshad, Abbasi Anees Qumar, Beltiukov Anatoly Petrovich, Hussain Lal.

  541-545

• Risk analysis of construction planning that affecting quality and time control in the apartment development performance using PLS - SEM method (case study in apartments in Tangerang)

  • 

  Angga Sumantri, Nunungwidyaningsih ., Bambang P. K. Bintoro

  546-551

• The effect of project owners, plan-developers and characteristics of projects on airport building performance

  • 

  Reiza Irfansyah, Budi Susetyo, Syafwandi .

  552-559

• Improvement of cost performance accompanied by quality control using value engineering and six sigma methods in high-rise building project

  • 

  Khairul Rochman, Budi Susetyo

  560-567

• Analysis of the time series of seismic and deformation monitoring, obtained from closed works at the Kirovsky mine of JSC "Apatite"

  • 

  Gospodarikov Aleksandr P., Morozov Konstantin V., Revin Ilia E

  568-571

• Design and fabrication of high productive barbecue machine

  • 

  Usman Ghani, Mubashir Hayat, Tufail Habib, Alam Zeb, Khizar Azam

  572-581

• Acoustic data classification using random forest algorithm and feed forward neural network

  • 

  Ali Najdet Nasret Coran, Prof Dr. Hayri Sever, Dr. Murad Ahmed Mohammed Amin

  582-585

• A study for the prediction of corona power on electrostatic precipitator based on simple and easy two-dimensional electrostatic simulation

  • 

  Chang-Hee Cho, Dong-Hoon Kim, Sang-Eon Park

  586-591

• A new multistage Parker-Sochacki method for solving the Troesch’s problem

  • 

  Saheed Akindeinde, Samuel Adesanya, Ramosheuw S. Lebelo, Kholeka C. Moloi

  592-601