Vol. 7 No. 4.18 (2018): Special Issue 18

Articles

• Systematic Cost Framework by Application of Universal Design (UD) Concept for Operating Instructions in Design Stage

  Nursuhana Alauddin, Solehuddin Shuib

  Pages: 1-4

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21809

• Direct Surfactant-Impregnated Activated Carbon for Adsorption of Reactive Blue 4

  Puasa S.W, Ismail K.N, Khairi N.A.I.

  Pages: 5-8

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21810

• Green Synthesis of Iron Oxide Nanoparticles (Fe3O4-NPs) using Azadirachta Indica Aqueous Leaf Extract

  Nurul Izza Taib, Famiza Abdul Latif, Zakiah Mohamed, Nur Diyana Syazwani Zambri, . .

  Pages: 9-13

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21811

• Investigation of Substituent Effects on Corrosion Protection of Mild Steel by Schiff Bases in 0.5 M NaCl

  Syaidah Athirah Dzolin, Hadariah Bahron, Yusairie Mohd

  Pages: 14-18

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21812

• Coating of Tin Octoate on Ceramic Support: Effect of Polyvinyl Alcohol and Polyethylene Glycol as Binders

  Norliza Ibrahim, Abdul Muiz Abdul Jalil, Muhammad Muzzamil Asyraf Musa, Amira Nadzirah Suhaidi

  Pages: 19-22

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21813

• Finite Element Analysis of Prestressed Concrete Sleeper Subject to Static Loading

  Mohd Ikmal Fazlan Rozli, Nur Nadeera Kipperawi, Che Mohd Hilmi Safiuddin Che Jamaludin Mahmud, Kay Dora Abdul Ghani, Norliyati Mohd Amin

  Pages: 23-26

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21814

• Effect of Soaking Time on the Mechanical Properties of Kenaf/Epoxy Composites

  Abdul Muiz bin Saringon, Anizah Kalam, Fauziah Md Yusof, Syed Ahmad Shafiq Shauqi Syed Mohamed

  Pages: 27-31

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21815

• Performance Enhancement of Solar Photovoltaic Cooling Using Water Sprinkler

  Nurul Najwa Md Nasir, Baljit Singh, Raihan Abu Bakar, Muhammad Fairuz Remeli, Aneurin Nanggar, Amandeep Oberoi

  Pages: 32-37

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21816

• Design Process Optimization of Lower Arm Assembly Suspension

  Muhammad Azfar Zulkipli, Shahrul Azam Abdullah, Muhamad Sani Buang

  Pages: 38-41

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21817

• Flexural Behaviour of Nanoclay filled Chopped Basalt and Glass Fibres Composites

  Nurul Emi Nor Ain Mohammad, Aidah Jumahat, Ummu Raihanah Hashim, Nur Syarah Iffah Azizi

  Pages: 42-45

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21818

• Electrodeposition of Co-Ni-Fe on Railway Fastener

  Y. M Taib, Z. Salleh, N. R. N. M. Masdek, A. Jumahat, A. Kalam, M. Z. Abu

  Pages: 46-50

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21819

• Adhesive and Abrasive Wear Properties of Nanoclay-Modified Chopped Kenaf Fiber Reinforced Polymer Composites

  Aidah Jumahat, Anis Adilah Abu Talib, Tg Faizuddin Tg Mohd Azmi, M Adzummar Hakim Abdull Adziz

  Pages: 55-59

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21820

• Effect of Silica Nanoparticles on Quasi-Static Indentation and Impact Properties of Glass Fibre Reinforced Epoxy Polymer Composites

  Nurul Emi Nor Ain Mohammad, Aidah Jumahat, Anthony Arthur

  Pages: 51-54

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21821

• Unidirectional and Transverse Tensile Properties of Nanoclay Filled Kenaf/Glass Fibre Hybrid Composites

  Norhashidah Manap, Aidah Jumahat, Muhammad Arif bin Ismail

  Pages: 60-64

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21822

• Supercritical Carbon Dioxide Extraction of Leucaena leucocephala Pod– Oil Yield & Component Identification

  N. A.Zainuddin, Istikamah Subuki, K. A. Ibrahim, Nor Fariza Ismail, Siti Rohana Mohd Yatim, Noor Harliza Abd Razak

  Pages: 65-70

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21823

• Corrosion Retardation of Mild Steel Electrodeposited with 4-hydroxybenzalaniline in 0.5 M NaCl

  Syaidah Athirah Dzolin, Hadariah Bahron, Yusairie Yusairie Mohd, Nor Zakiah Nor Hashim

  Pages: 71-74

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21824

• Mechanical and Thermal Properties of Sayong Clay/HDPE Composites

  Ahmad Ramli Rashidi, Arbanah Muhammad, Salmi Nur Ain Sanusi, Siti Hajar Anaziah Muhamad, Meor Muhammad Hafiz Shah Buddin

  Pages: 75-79

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21825

• Calcium phosphate nanoparticles prepared via solid-state route

  A. N. Natasha, S. Ramesh, C. Y. Tan

  Pages: 80-83

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21826

• Physico-chemical and catalytic properties of Fe-MKSF catalyst: Influence of MKSF clay as catalyst support

  Nur Hidayati Abdullah, Nor Aida Zubir, Mohammad Khairul Azam Selamat, Rasyidah Alrozi, Norhaslinda Nasuha, Hawaiah Imam Maarof, Benjamin Ballinger, Julius Motuzas, João C. Diniz da Costa

  Pages: 84-89

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21827

• Effect of Solvents and Crystallization Methods on the Formation of Carbamazepine-Saccharin Co-Crystal

  Fatinah Ab Rahman, Engku N. Engku Mat Nasir, Syarifah Abd Rahim, Raihana Z. Edros, Nornizar Anuar

  Pages: 90-94

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21828

• Structural elucidation of galactomannan from ‘Petai Belalang’(Leucaena leucocephala) and its modified analogue

  Shazlinda Shirajuddin, Dzaraini Kamarun, Sabu Thomas

  Pages: 95-98

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21829

• BSA /anti BSA Interaction Study using a Novel Modular Surface Plasmon Resonance (m-SPR) Device

  Wan Mohd Azwady Wan Ahamad, Dzaraini Kamarun, Mohd Kamil Abd Rahman

  Pages: 99-102

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21830

• Nanocarnation-like Nickel Oxide Thin Film: Structural and Optical Properties

  N. Parimon, M. H. Mamat, M. A. R. Abdullah, A. S. Ismail, W. R. W. Ahmad, I. B. Shameem Banu, M. Rusop

  Pages: 103-106

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21831

• Alpha Lactose Monohydrate Morphology: Molecular Modelling and Experimental Approach

  Zulfahmi Lukman, Nornizar Anuar, Noor Fitrah Abu Bakar, Norazah Abdul Rahman

  Pages: 107-112

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21832

• Polypropylene/Luffa Wood Plastic Composites with High Fibre Loading

  Siti Nur ‘Aisyah Umar Syarifuddin, Raja Roslan Raja Mohamed, Ahmad Faiza Mohd, Engku Zaharah Engku Zawawi, Nur Hikamah Seth, Dzaraini Kamarun

  Pages: 118-121

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21883

• Prediction of Carbamazepine-Succinic Acid Co-Crystal Dissolution in Ethanolic Solution using a Computational Molecular Dynamic Simulation Technique

  Nornizar Anuar, Noor Sazmira Pauzi, Siti Nurul ‘Ain Yusop, Nik Salwani Md Azmi, Syarifah Abd Rahim, Muhammad Fitri Othman

  Pages: 122-128

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21884

• Ergonomics Analysis for Angiography Arm Board Design

  Nabill bin Hidzir Pauzi, Noor Azlina binti Mohd Salleh, Shahrul Azam Abdullah, Johan Rizwal Ismail

  Pages: 129-132

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21885

• Tribological properties of palm oil bio-lubricant with modified carbon nanotubes

  Izatul Hamimi Abdul Razak, Mohamad Ali Ahmad, Nadia Nurul Nabihah Ahmad Fuad, Khairul Syazwani Shahrudin, . .

  Pages: 133-137

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21886

• AC Conductivity and Dielectric Properties of Strontium-Lead Borate Glasses

  R. Hisam, A. K. Yahya, Dayana Said, M. F. Mustafa

  Pages: 143-146

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21887

• Alcohol Detection in Consumer Products via POF Fiber Sensor and Spectroscopy Techniques

  M. Kamil Abd-Rahman, H. Saad, . .

  Pages: 147-151

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21888

• Consumers’ intention to use mobile health applications from the consumer acceptance technology (CAT) perspectives

  Khairul Nazlin Kamaruzaman, Amily Fikry, Zuhal Hussein

  Pages: 152-155

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21889

• Evaluation of Antioxidant Activity and Total Phenolic Content in Bread Incorporated with Green Coffee Beans (GCB)

  Ummi Kalthum Ibrahim, Nurul Syafiqah Abd Wahab, Suzihaque M. U. H., Syafiza Abd Hashib, Rabiatul Adawiya Abdul Aziz

  Pages: 156-160

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21891

• Characterisation of Catfish (Clarias batrachus) Waste Oil: γ-Cyclodextrin Inclusion Complex

  Zaibunnisa Abdul Haiyee, Nor Izzatul Adyani Yahya, Norizzah Abd Rashid, Norakma Mohd Nor, Dzulkifly Mat Hashim

  Pages: 161-165

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21893

• Effect of Tensile and Material Properties on Springback Behavior of DP590 Advanced High Strength Steel During Bending Process

  Shahrul Azam Abdullah, Muhammad Sani Buang, Muhammad Azfar Zulkpli, Fakhrul Rozi Mokhtar, Hashim Abdullah

  Pages: 166-170

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21896

• Fabrication of Functionally Graded Open-cell Aluminium Foam Using Graded NaCl in Infiltration Casting

  Mohd Arifhakim Azizan, Noor Azlina Mohd Salleh, Muhammad Hussain Ismail, Valliyappan David Natarajan

  Pages: 171-175

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21897

• Effect of NR/NBR ratio on mechanical properties and crosslink concentration of NR/NBR blend latex film

  Norzahida M Salih, Siti Aisyah Jarkasi, Azemi Samsuri, Engku Zaharah Engku Zawii, Norazura Ibrahim, Dzaraini Kamarun

  Pages: 176-180

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21900

• Characteristics of Cotton, Polyester and Rayon Fabrics Coated with Acetobacter xylinum

  Amira Syazwani Mustafa Kamal, Mohd Iqbal Misnon, Mohd Nazarudin Zakaria, Muhammad Ismail AB Kadir, Mohd Rozi Ahmad

  Pages: 181-184

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21903

• Electrochemical Behaviour of Titanium Alloys And Stainless Steel In Different Simulated Body Fluid

  Nik Rozlin binti Nik Mohd Masdek, Zuraidah Salleh, Zainal Abidin Kamarul, Md Zin Abu

  Pages: 185-189

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21904

• Effect of C6H8O7 Concentration on Silica Extraction of Rice Husk, Rice Husk Ash and Mixture of Rice Husk With Rice Husk Ash Via Acid Leaching Process

  Noratiqah Syahirah Mohd Zarib, Shahrulazam Abdullah, . .

  Pages: 190-195

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21906

• Thermophysiological Comfort Properties of Ripstop Fabrics for Enforcement Personnel Clothing

  N. Zahari, M. R. Ahmad, M. F. Yahya, A. M. Che Muhamed, R. Yahaya

  Pages: 196-199

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21908

• Improvement of Flexural Properties and Dimensional Stability of Rice Husk Particleboard Using Wood Strand from Azadirachta excelsa in Face Layer

  Wan Mohd Nazri Wan Abdul Rahman, Muhamad Zahir Bin Nazri, Nor Yuziah Mohd Yunus

  Pages: 200-203

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21910

• The Improvement of Missing Rainfall Data Estimation During Rainy Season at Ampang Station

  Nurul Aishah Rahman, Sayang Mohd Deni, Norazan Mohamed Ramli, Norshahida Shaadan

  Pages: 204-212

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21912

• Degradation of Acid Orange II by Heterogeneous Fenton-like Reaction Using Clay Supported Fe3-xMoxO4 Composite Catalyst

  Rasyidah Alrozi, Nor Aida Zubir, Aisyah Aina Jumain, Norhamimi Shafika Zainun, Mohammad Khairul Azam Selamat, Norhaslinda Nasuha, Hawaiah Imam Maarof, Mohamad Anuar Kamaruddin

  Pages: 213-216

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21914

• Reduction of Sonication-Assisted Graphene Oxide via Chemical and Thermal Treatments

  Nurul Fattin Diana Junaidi, Nur Hidayati Othman, Ili Nadia Ismail, Nur Hashimah Alias, Munawar Zaman Shahruddin, Husna Hayati Jarni, Mohammad Fiqri Zainuddin, Nik Raikhan Nik Him, Wan Fazlida Hanim Abdullah

  Pages: 217-222

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21916

• Effect of PVA on Mechanical Properties of Tapioca Starch Reinforced Coconut Fiber Biopolymer Composite

  Fauziah Md Yusof, Che Faridah Mat Taib, Nor ‘Aini Wahab, Noor Leha Abdul Rahman, Anizah Kalam, Zuraidah Salleh

  Pages: 223-227

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21919

• Moisture & Acetaminophen analysis on the Aquilaria Malaccensis dried leaves extract

  Habsah Alwi, Nor Syaira Kamaruddin, Jefri Jaafar, Hanafiah Zainal Abidin, Ku Halim Ku Hamid

  Pages: 228-231

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21921

• Processing of Porous 316L Stainless Steel by Replacing Metal Powder with Saccharose

  Nor ‘Aini Wahab, Ismail Nasiruddin Ahmad, Nurul Farhana Omar, Nurul Fatahah Asyqin Zainal, Tamil Moli Loganathan

  Pages: 232-236

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21923

• Effect of Injection Molding Parameters on Mechanical Properties of Keychain Made of Recycled Polypropylene

  Koay Mei Hyie, Anizah Kalam, Muhammad Basyar Bin Ramli

  Pages: 237-241

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21925

• Effect of Silane Concentration on the Physical and Mechanical Properties of Bacterial Cellulose Silylated Aerogels

  Mohd Nazarudin Zakaria, Nuraqilah Hishammuddin, Norsyasha Nazifa Fairos, Mohamad Nurhakim Syafiq Mohd Nasir, Sukirah Abdul Rahman

  Pages: 242-246

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21927

• The effects of microbial fermentation on antibacterial activity of seaweed (Kappaphycus alvarezii) extracts

  Norakma M.N, Zaibunnisa A.H., Wan Razarinah W.A.R

  Pages: 247-251

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21928

• Physical and Chemical Properties of 4 Years Petai Belalang (Leuca`ena leucocephala) Wood

  Nor Yuziah Mohd Yunus, Wan Mohd Nazri Wan Abdul Rahman, Zulhilmi Razali

  Pages: 252-255

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21929

• Biosorption of coloured wastewater onto citric acid modified casuarina equisetifolia leaves powder

  Siti Fatma Binti Abd Karim, Nurul Syahirah Binti Abd Kahar, Ummi Kalthum Ibrahim, Rabiatul Adawiyah Abdol Aziz

  Pages: 256-261

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21930

• Material Properties of Composite Materials for FSAE Car Body Panels

  Muhamad Azmeel Borhan, Bibi Intan Suraya Murat

  Pages: 262-266

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21931

• Effect of Coconut Fiber Reinforcement on Mechanical Properties of Corn Starch Bioplastics

  Arbanah Muhammad, Ahmad Ramli Rashidi, Meor Muhammad Hafiz Shah Buddin, . .

  Pages: 267-270

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21932

• Product distribution from microwave pyrolysis of automotive paint sludge

  Syarifah Nor Faizah Syed Abdul Rahman, Norazah Ab Rahman, Siti Shawalliah Idris, Noor Fitrah Abu Bakar, Johan Ariff Za’bar, Zakiuddin Januri

  Pages: 271-276

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21933

• Fabrication of Nickel Oxide Nanowall Network Films at Different Annealing Temperatures for Humidity Sensing Applications

  M. H. Mamat, N. Parimon, M. A.R. Abdullah, A. S. Ismail, M. F.. Malek, W. R.W. Ahmad, A. S. Zoolfakar, A. B. Suriani, M. K. Ahmad, N. Nayan, I. B. Shameem Banu, R. Amiruddin, M. Rusop

  Pages: 277-282

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21934

• Effect of Activated Carbon and ZSM-5 on Oil Yield from Microwave Assisted Pyrolysis of Automotive Paint Sludge (APS)

  Johan Ariff Za’bar, Norazah Abd Rahman, Zakiuddin Januri, Syarifah Nor Faizah, Siti Shawalliah Idris

  Pages: 283-286

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21935

• Probability of Burn Victim Survival from BLEVE Fireball Impact during LPG Transportation Accident

  Zulkifli Abdul Rashid, Anis Farhanah Mohd Suhaimi Yeong, Nik M. Faisal, Azil Bahari Alias, Sherif Abdulbari Ali

  Pages: 287-291

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21936

• Inhibition of High Substrate Concentration of Ammonia-Nitrogen in Bio-Filter

  Norhafezah Kasmuri, Robert William Lovitt, . .

  Pages: 292-296

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21937

• Extraction and Characterization of Chitin from Leucaena Leococephala

  Noor Harliza Abd Razak, Shareena Shahira Tajul Arus, N. A . Zainuddin

  Pages: 297-300

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21938

• Coating of Tin Octoate on Ceramic Support as A Function of Concentration and Sintering Temperature

  Norliza Ibrahim, Siti Husna Kamarulzam, Nurasmida Mohd Adnan, Amira Nadzirah Suhaidi

  Pages: 301-305

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21939

• Enhancement of Energy Properties of Leucaena Leucocephala Pellets via Torrefaction and its Non-Isothermal Decomposition Kinetics

  S. Matali, N. A. Rahman, S. S. Idris, N. Yaacob

  Pages: 306-310

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21940

• Nanocrystalline Cellulose Isolation from Pulverized Kenaf Core using Hydrothermal Treatment with Low Concentration of Oxalic Acid

  Syaidatul Akma Mohd Zuki, Muhammad Shaifudin bin Azman, Norazah Abd Rahman, Noor Fitrah Abu Bakar

  Pages: 311-315

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21941

• Corrosion inhibition of carbon steel using fatty amide derivatives and an oxygen scavenger under elevated temperatures

  Izni Mariah Ibrahim, Ezan Suhailah Mohd Kassim, Junaidah Jai, Muhamad Daud, Md Amin Hashim

  Pages: 316-320

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21942

• Effect of Turmeric Oil in Chitosan-Based Edible Coating on Physical and Chemical Properties of Strawberry

  Noorsuhana binti Mohd Yusof, Junaidah binti Jai, Nurul Ain binti Zulkiflee, Nurul Fatin Alia binti Mustapha, Zatul Iranati binti Md. Sharif

  Pages: 321-324

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21943

• Characterization of Biocomposite Film Coating for Food Paper Packaging

  Nurul Fatin Alia Mustapha, Zatul Iranati Md. Sharif, Junaidah Jai, Noorsuhana Mohd Yusof, Sitinoor Adeib Idris

  Pages: 325-330

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21944

• Effect of Dipping Time and Weight Loss of Fresh-Cut Apple using Polysaccharide Composite Edible Coating

  Zatul Iranati Md. Sharif, Junaidah Jai, Nurul Fatin Alia Mustapha, Istikamah Subuki, Noorsuhana Mohd. Yusof, Rabiatul Adawiyah Abdol Aziz

  Pages: 331-336

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21945

• Oil removal from oily sludge using surfactant technology

  Puasa S.W, Ismail K.N, Rahim N.S.A

  Pages: 337-341

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21946

• Properties of plywood from planted Paraserianthes falcataria and Neolamarckia cadamba

  Wan Mohd Nazri Wan Abd Rahman, Muhammad Fitri Sa’ad, Nor Yuziah Yunus

  Pages: 342-345

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21947

• Hemispherical Low Blow Impact Treatment Spot-welded Joint

  Z. Salleh, N. R. N. M.Masdek, Y. M. Taib, F. A. Ghazali

  Pages: 350-353

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21948

• Investigation of the Electrodeposited CoNiFe Alloy Coating on Microstructure and Mechanical Properties

  Z. Salleh, N. R. N. M. Masdek, Z. A. Kamarulbaharin, Y. M Taib, M. Z. Abu

  Pages: 354-358

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21955

• Effect of Sorbent Weight on H2S removal by Biochar and Hydrogel Biochar derived from Rice Husk

  Azil Bahari Alias, Muhamad Ariff Amir Hamzah, Zulkifli Abdul Rashid, Amirul Rahman Mohd Nor, Wan Azlina Wan Ab Karim Ghani

  Pages: 359-363

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21957

• Hydrogen Sulfide (H2S) Removal by Commercialized Biochar Derived from Rice Husk: Effect of Flowrate, Temperature and Sorbent Weight

  Azil Bahari Alias, Muhamad Ariff Amir Hamzah, Nik Nur Adibah Hafizah Mohamad, Mohamad Fathmi Masor @ Mansor, Zulkifli Abdul Rashid, Nor Hidayah Meri, Ashadi Azwan Abd Rahman, Norhayati Talib, Wan Azlina Wan Ab Karim Ghani

  Pages: 364-368

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21971

• Modelling of Adsorption Kinetic and Equilibrium Isotherms of Hydrogen Sulfide onto Hydrogel Biochar Adsorbent

  Azil Bahari Alias, Muhamad Ariff Amir Hamzah, Nor Hidayah Meri, Nik Muhammad Faisal Mat Yasin, Zulkifli Abdul Rashid, Wan Azlina Wan Ab Karim Ghani

  Pages: 369-375

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21972

• Design and Analysis of High Flexion Femoral Component for Total Knee Arthroplasty (TKA)

  Mohammad Hanafi Seman, Solehuddin Shuib, Mohd Afzan bin Mohd Anuar, Amran Ahmed Shokri

  Pages: 381-385

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21974

• Removal of Chemical Oxygen Demand (COD) from Synthetic Rubber Wastewater Via Foam Fractionation (FF) Method

  N. A.Zainuddin, W. M.Hafiz, Noor Harliza Abd Razak, Siti Rohana Mohd Yatim

  Pages: 386-389

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21975

• Characterization of Sand Proppant and Its Improvement via Polyurethane Coating

  Noor Fitrah Abu Bakar, Siti Norhidayah Abdullah Zawawi, Rohani Mohd Zin, Norazah Abdul Rahman, Norin Kassim Shaari

  Pages: 390-399

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21976

• Miscibility Study of Hexanoyl Chitosan/ Poly(Vinyl Chloride) Blends by Dilute Solution Viscometry and FTIR

  F. H. Muhammad, R. H.Y. Subban, Tan Winie

  Pages: 400-403

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21977

• Electrical Behaviour and Photovoltaic Performance of Poly (ε-caprolactone)-Based Quasi-Solid-State Polymer Electrolyte

  N. A. Y. Razamin, R. H. Y. Subban, Tan Winie

  Pages: 404-408

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21978

• Antioxidant activities of oligostilbenoids from the stem bark of Dipterocarpus verrucosus, Dipterocarpus crinitus and Dipterocarpus cornutus

  Wan Zuraida Wan Mohd Zain, Norizan Ahmat, Che Puteh Osman

  Pages: 409-414

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21979

• Area Estimation of an Object Using Multiple Infrared Scanning Method for Non-vision Robotic System

  Norashikin M. Thamrin, Muhamad Arif Ashari, . .

  Pages: 415-418

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21980

• Investigation of Annealing Temperature on Vanadium Dioxide Thin Films

  Hashimah Hashim, Muhammad Rafiq Roslan, Ibrahim Mohd Yazid

  Pages: 419-423

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21981

• Effect of Aluminium closed-plate on energy absorption of hat-section tubes

  Hafizan Hashim, Hanita Hashim, Siti Hawa Mohd Yusoff, Arif Affendi Jamal

  Pages: 424-428

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21982

• Development of a 4-DOF Robotic Arm: Prototype Design

  Muhammad Farhan Mustaffa, Ruhizan Liza Ahmad Shauri, Muhammad Izzat Roslan, Muhammad Asyraf Idris

  Pages: 429-432

  DOI: https://doi.org/10.14419/ijet.v7i4.18.21983

• Distribution Generation Optimal Placement with Various Power Factors and Loading Margins

  Kalidas Babu Gera, Dr. P.V. Ramana rao

  Pages: 433-437

  DOI: https://doi.org/10.14419/ijet.v7i4.18.22974

• Implementation of Two Stage Isolated Multilevel Inverter Con-trol Strategy Using Fuzzy Logic Controller for Photovoltaic Application

  K. Jithendra Gowd, K. Pavani, 3K. Nagabhushanam

  Pages: 442-448

  DOI: https://doi.org/10.14419/ijet.v7i4.18.22979

• Automatic Centralized Micro-Grid Controller with the Algo-rithm of Incremental Conductance

  K. Jithendra Gowd, B. Poornima, K. Nagabhushanam

  Pages: 449-454

  DOI: https://doi.org/10.14419/ijet.v7i4.18.22982

• Railway Traction System Based on Power Electronic Transformer

  M.Subba Rao, P.V.S. Sobhan, Shaik Naseer Ahammad

  Pages: 461-464

  DOI: https://doi.org/10.14419/ijet.v7i4.18.22984

• A Novel Architecture for the Realization of an Internet of Things- Enabled ECG Signal Quality Aware using Empirical Mode Decomposition for Healthcare System

  Ramesh Babu Chukka, Chennupati Sumanth Kumar

  Pages: 438-441

  DOI: https://doi.org/10.14419/ijet.v7i3.18.22975

• The Effect of Heater Layer (SiC) Thickness for Phase-change Memory Phase Transition

  M. S. Aziz, F. H. M.Fauzi, Z. Mohamad, R. I. Alip

  Pages: 464-467

  DOI: https://doi.org/10.14419/ijet.v7i4.18.25258

• Effect of Grain Modification on Electrical Transport Properties and Electroresistance Behavior of Sm0.55Sr0.45MnO3

  N. Ibrahim, Nur Azeni Mohamad Rusop, R. Rozilah, Nor Asmira, A. K.Yahya

  Pages: 468-472

  DOI: https://doi.org/10.14419/ijet.v7i4.18.25259

• Properties of Fibreboard Made from Cultivated Leucaena leucocephala and Rubberwood

  Hilmi Ab. Rahman, Wan Mohd Nazri Wan Abdul Rahman, Nur Amalina Razali, Jamaludin Kasim, Muhammad Fitri Sa’ad, Yani Japaruddin, Naoki Ogawa

  Pages: 473-476

  DOI: https://doi.org/10.14419/ijet.v7i4.18.25260

• The Effects of Austempered and Quenched & Tempered on Mechanical Properties of Alloyed Grey Cast Iron

  Bulan Abdullah, Khalissah Yusof, Farahnini Zamri, Nor Hayati Saad

  Pages: 477-481

  DOI: https://doi.org/10.14419/ijet.v7i4.18.25261

• Dissolution Prediction of Fumaric Acid Crystal (Form A) in Ethanol using Molecular Dynamic Simulation

  Siti Nurul’ain Yusop, Wirani Anak Nili, Nornizar Anuar, Nik Salwani Md Azmi, Muhammad Fitri Othman, Syarifah Abd Rahim

  Pages: 483-487

  DOI: https://doi.org/10.14419/ijet.v7i4.18.25262