Comparison of electroless Ni-P/ Ni-B on corrosion performance

 
 
 
  • Abstract
  • Keywords
  • References
  • PDF
  • Abstract


    This research work compares annealed and as-coated electroless Ni-P’s resistance to corrosion and electroless Ni-B coating prepared on the mild steel substrate. The coatings’ resistance to corrosion was estimated by Tafel electro chemical polarization method utilizing electrochemical analyser in 3.5wt % solution of Sodium Chloride. Both the coatings’ annealing temperatures were maintained at normal intervals to consider their corrosion resistance performance. Further, the corrosion behaviour of both the coatings with their as-coated and various annealed temperature were discussed for the deliberation of deposits phases, crystallite sizes and micro strain.


  • Keywords


    Electroless Nickel (EN); Corrosion Performance; The Coatings of Electroless Ni-P; Ni-B; XRD.

  • References


      [1] Bonin M, Bains N, Vitry V &Cobley AJ, “Electroless Deposition of Nickel-Boron Coatings Using Low Frequency Ultrasonic Agitation: Effect of Ultrasonic Frequency on the coatings”, Ultrasonics, Vol.77, (2017), pp.61-68.https://doi.org/10.1016/j.ultras.2017.01.021.

      [2] Shao C & Yao Y, “Preparation and Mechanical Properties of Electroless Nickel-Phosphours-Tungsten Carbide Nanocomposite Coatings”, Journal of Materials Engineering and Performance, Vol.23, No.1, (2014), pp.193-197.https://doi.org/10.1007/s11665-013-0753-2.

      [3] Martyak NM & Drake K, “Peak-profile analysis of electroless nickel coatings”, Journal of alloys and compounds, Vol.312, No.1-2, (2000), pp.30-40.https://doi.org/10.1016/S0925-8388(00)01099-9.

      [4] Keong KG, Sha W &Malinow S, “Crystallisation Kinetics and Phase Transformation Behaviour of Electroless Nickel-Phosphorus Deposits with High Phosphorus Content”, Journal of Alloys and Compounds, Vol.334, (2002), pp.192-199.https://doi.org/10.1016/S0925-8388(01)01798-4.

      [5] Liu H, Guo RX, Viejo F & Liu Z, “Comparison of Microstructure and Residual Stress Characteristics of Electroless Ni-W-P Coatings Annealed with a Laser and a Furnace”, Journal of Surface and Coatings Technology, Vol.206, (2012), pp.2380-2387.https://doi.org/10.1016/j.surfcoat.2011.10.037.

      [6] Staia MH, Puchi ES, Gastro G, Ramirez FO & Lewis DB, “Effect of Thermal History of the Micro Hardness of Electroless Ni-P”, Journal of Thin Solid Films, Vol.472, (1999), pp.355-356.

      [7] Gay PA, Limat JM, Steinmann PA &Pagetti J, “Characterization and Mechanical Properties of Electroless NiP-ZrO2 Coatings”, Journal of Surface and Coatings Technology, Vol.202, (2007), pp.1167-1171.https://doi.org/10.1016/j.surfcoat.2007.05.081.

      [8] Tien SK, Duh JG & Chen YI, “The Influence of Thermal Treatment on the Microstructure and Hardness in Electroless Ni-P-W Deposits”, Journal of Thin Solid Films, Vol.469-470, (2004), pp.333-338.https://doi.org/10.1016/j.tsf.2004.08.146.

      [9] Rabizadeh T, Allahkaram SR &Zarebidaki A, “An investigation on effects of heat treatment on corrosion properties of Ni–P electroless nano-coatings”, Materials & Design, Vol.31, No.7, (2010), pp.3174-3179.https://doi.org/10.1016/j.matdes.2010.02.027.

      [10] Hong L, Guo RX, Yun ZONG, He BQ & Zhu LIU, “Comparative study of microstructure and corrosion resistance of electroless Ni-WP coatings treated by laser and furnace-annealing”, Transactions of Nonferrous Metals Society of China, Vol.20, No.6, (2010), pp.1024-1031.https://doi.org/10.1016/S1003-6326(09)60252-1.

      [11] Bülbül F, Altun H, Küçük Ö &Ezirmik V, “Tribological and corrosion behaviour of electroless Ni-B coating possessing a blackberry like structure”, Metals and Materials International, Vol.18, No.4, (2012), pp.631-637.https://doi.org/10.1007/s12540-012-4011-1.

      [12] Lee KH, Chang D & Kwon SC, “Properties of Electrodeposited Nanocrystalline Ni–B Alloy Films”,Electrochimica Acta, Vol.50, No.23, (2005), pp.4523-4626.https://doi.org/10.1016/j.electacta.2004.03.067.

      [13] Yildiz RA, Genel K &Gulmez T, “Effect of Heat Treatments for Electroless Deposited Ni-B and Ni-WB Coatings on 7075 Al Alloy”, International Journal of Materials, Mechanics and Manufacturing, Vol.5, No.2, (2017), pp.83-86.https://doi.org/10.18178/ijmmm.2017.5.2.295.

      [14] Baskaran I, Sakthi Kumar R, Sankara Narayanan TSN & Stephen A, “Formation of Electroless Ni–B Coatings using Low Temperature Bath and Evaluation of Their Characteristic Properties”, Surface and Coatings Technology, Vol.200, No.24, (2006), pp.6888-6894.https://doi.org/10.1016/j.surfcoat.2005.10.013.

      [15] Edwin Sahayaraj M, WinowlinJappes JT, Siva I & Rajini N, “Investigation on Corrosion Performance of Multilayer Ni-P/TiO2 Composite Coating Steel”, Journal of Science and Engineering of Composite Materials, Vol.23, No.3, (2016), pp.309-314.

      [16] Edwin Sahayaraj M, WinowlinJappes JT & Siva I, “Effect of Heat Treatment Temperature on the Corrosion Performance of Electroless Ni-P/Ni-P-TiO2 Deposits on Carbon Steel”, Journal of Advanced Microscopy Research, Vol.9, (2014), pp.16-21.https://doi.org/10.1166/jamr.2014.1180.

      [17] Delaunois F &Lienard P, “Heat Treatments for Electroless Nickel-Boron Plating on Aluminium Alloys”, Surface Coating Technology, Vol.160, No.2-3, (2002), pp.239-248.https://doi.org/10.1016/S0257-8972(02)00415-2.

      [18] Sankara Narayanan TSN, Krishnaveni K & Seshadri SK, “Electroless Ni-P/Ni-B Duplex Coatings: Preparation and Evaluation of Micro-hardness”, Wear and Corrosion Resistance, Materials Chemistry and Physics, Vol.82, No.3, (2003), pp.771-779.

      [19] Baskaran I, Sankara Narayanan, TSN & Stephen A, “Corrosion Resistance of Electroless Ni-Low B Coatings”, Transactions of the Institute of Metal Finishing, Vol.87, No.4, (2009), pp.221-224.https://doi.org/10.1179/174591909X438848.

      [20] Ziyuan S, Deqing W &Zhimin D, “Surface Strengthening Pure Copper by Ni–B Coating”, Applied Surface Science, Vol.221, No.1–4, (2004).https://doi.org/10.1016/S0169-4332(03)00753-0.

      [21] Sahayaraj ME, Jappes JTW, Siva I & Saravanan MSS, “A comparative corrosion study of electroless Ni-P coatings treated by microwave and conventional furnace annealing”, Corrosion Reviews, Vol.32, No.1-2, (2014), pp.43-49.https://doi.org/10.1515/corrrev-2013-0052.


 

View

Download

Article ID: 9740
 
DOI: 10.14419/ijet.v7i1.9.9740




Copyright © 2012-2015 Science Publishing Corporation Inc. All rights reserved.