Working process of TU 3a CNC frais machine using software system

 
 
 
  • Abstract
  • Keywords
  • References
  • PDF
  • Abstract


    This workpiece process is: to find out how to transfer images from Auto CAD software to the Q plus CELL Milling Cnc software, and to find out how to transfer programs from the CNC Milling QELL KELLER software to the TU 3A CNC milling machine. The making of this workpiece uses three main media, namely Auto CAD 2000 software, CNC Milling KELLER Q plus software, and TU 3A CNC milling machine. The process of making the workpiece starts from making the workpiece design in Auto CAD software which is then stored on the CDR via DFX data. The design of the workpiece contained in the CDR is then transferred to CNC Millling KELLER Q plus software via Geometry. in Geometry, the design of the workpiece is dimensioned. Completed from the Geometry the workpiece design is included in the Work plan to be processed so that it can be simulated to move to a CNC program to convert the graphical language into a numeric language so that it can be read by a CNC machine. The programming results from the CNC KELLER Q plus software are then recorded to be executed on the CNC TU 3A milling machine to obtain the workpiece in accordance with the design in AutoCAD. Programming results from CNC Milling KELLER Q plus software cannot be directly used on the TU 3A milling machine (EMCO), because the programming language used is different. Programming language in CNC Milling KELLER Q plus software uses the DIN 66025 standard, while the CNC TU 3A (EMCO) milling machine uses ISO standards, so it needs to be converted first.


  • Keywords


    Process; TU 3A CNC Milling Machine; AUTO CAD 2000; Software CNC Milling KELLER Q Plus.

  • References


      [1] Junaidi, “Tu 3a Cnc Milling Machine Implementation Using Keller Q Cnc Software Based on Auto Cad 2000 Software,” in Seminar Nasional Teknologi Informasi dan Komunikasi (SNASTIKOM ) HARAPAN, 2017, pp. 349–356.

      [2] JUNAIDI, “ANALYSIS THE EFFECT OF AMPER FLOWS ON THE I, V AND X CAPABILITY WITH E6013 ELECTRODE USING STEEL K945,” SAINTEK Fak. Tek. UISU MEDAN, vol. 3, no. ISSN No:2355-2395, pp. 353–362, 2016.

      [3] JUNAIDI dan EDDY, “Analysis of Cutting Carbide Tools with S45C Material on Universal Lathes,” in Seminar Nasional FT.UISU, 2017, pp. 116–123.

      [4] S. Hestukoro, I. Roza, and D. Morfi Nst, “Process Analysis of High Speed Steel Cutting Calculation (HSS) with S45 C Material on Universal Machine Tool,” Int. J. Innov. Sci. Res. Technol., vol. 3, no. 1, 2018.

      [5] JUNAIDI, “The Effect of Exposuretime on the Crack Length of Austenite AISI 304,316 and 316L Stainless Steel Material with Failure Stress Corrosion Cracking,” in WAHANA INOVASI Jurnal Penelitian dan Pengabdian, 2013, pp. 291–298.

      [6] J. BUDI SANTRI KUSUMA, “Analysis of the effect of cooling media and heating on hardness and microstructure in the tempering process of SKD 11 tool steel.,” PROSIDING Seminar Nasional Pembangunan Berkelanjutan Bangsa Berbasis Iptek (PB3I-ITM). BIRO PUBLIKASI DAN DOKUMENTASI -ITM jLN.Gedung Arca No.52 Medan, MEDAN, pp. 63–67, 2014.

      [7] M. akhi. junaidi, m.idris, “Analisa Pahat Potong HSS Dengan Material Besi Cor Pada Mesin Bubut Universal,” MEDAN, 1, 2015.

      [8] JUNAIDI, “Analysis Process of St.37 Steel Material Characteristics with Temperature and Time in Heat Treatment Test using Furnace,” J. UHAMZAH, vol. 08, no. 15, pp. 43–49, 1918.

      [9] J. Junaidi, S. Hestukoro, A. Yanie, J. Jumadi, and E. Eddy, “IMPLEMENTATION ANALYSIS of CUTTING TOOL CARBIDE with CAST IRON MATERIAL S45 C on UNIVERSAL LATHE,” in Journal of Physics: Conference Series, 2017, vol. 930, no. 1. https://doi.org/10.1088/1742-6596/930/1/012044.

      [10] JUNAIDI, “THE EFFECT OF HEAT TREATMENT PROCESS ON VIOLENCE AND MICRO STRUCTURE OF LOW CARBON STEEL ALLOY ST 60,” JITEKH, vol. 1, no. 5, pp. 33–42, 2016.

      [11] indra roza junaidi, weriono, “Process Analysis of High Speed Steel Cutting Calculation (HSS) with S45 C Material On Universal Machine Tool,” IJISRT (International J. Innov. Sci. Res. Technol., vol. 3, no. 1, pp. 447–456, 2018.

      [12] J. Weriono, “Noise Analysis of Variations in Engine Turn on 1300 CC Cars Due to Mechanical Vibration,” J. Technol. Harapan, vol. 6, no. 1, pp. 7–10, 2017.

      [13] A. Y. junaidi, dharmawati, “Analysis Cutting Tool High Speed Steel ( HSS ) With Cast Iron Material From Universal Lathe,” in IRSTC 2015 PROCEDING, 2015, pp. 464–477.

      [14] T. Siagian, I. Siregar, H. Lubis, T. Tinggi, U. A. Hamzah, and H. Process, “Characteristics of St . 37 Steel Materials with Temperature and Time on Heat Treatment Test using Furnace,” Int. J. Innov. Sci. Res. Technol. ( IJISRT ), vol. 3, no. 4, pp. 49–53, 2018.


 

View

Download

Article ID: 29682
 
DOI: 10.14419/ijet.v9i3.29682




Copyright © 2012-2015 Science Publishing Corporation Inc. All rights reserved.