Design and Analysis on Disposable Mouth Mirror

  • Authors

    • Mohd Shahriman Adenan
    • Mujahidah Zaira Azlan
    • J. B. Saedon
    • Azuddin M.
    https://doi.org/10.14419/ijet.v7i4.36.29368
  • Conceptual Design, Plastic Injection Moulding, Moldflow Simulation, Runner Geometry, Disposable Mouth Mirror

  • This paper presents on a conceptual design approach for developing design and simulation analysis on dental toolkit for disposable mouth mirror. Disposable mouth mirror designs contain with a very small and precise features for it handles and fix angle between shank and working area (mirror). To develop a 3D cad data, a conceptual design method in establishing disposable mouth mirror is carried out by using morphological chart and the best concept has been selected. A 3D cad model of disposable mouth mirror has been construct by using CATIA V5 based on the best criteria. The simulation and analysis by moulding software package is used in order to determine its suitable gate location, runner system, sprue, and fill time for single and double cavity. Material used for this product has been selected from plastic material polypropylene (PP) for its durability, light weight and low cost. At the end, a new innovative design of disposable mouth mirror including all ergonomics aspects and criteria has been designed and simulates to study its product behaviour.

     

  • References

    1. [1] S. M. Sapuan, M. A. Maleque, M. Hameedullah, M. N. Suddin, and N. Ismail, “A note on the conceptual design of polymeric composite automotive bumper system,†J. Mater. Process. Technol., vol. 159, no. 2, pp. 145–151, 2005.

      [2] M. Dragomir, D. Banyai, D. Dragomir, F. Popescu, and A. Criste, “Efficiency and Resilience in Product Design by Using Morphological Charts,†Energy Procedia, vol. 85, pp. 206–210, Jan. 2016.

      [3] G. Singh and A. Verma, “A Brief Review on injection moulding manufacturing process,†in Materials Today: Proceedings, 2017.

      [4] A. A. Dzulkipli and M. Azuddin, “Study of the Effects of Injection Molding Parameter on Weld Line Formation,†Procedia Eng., vol. 184, pp. 663–672, 2017.

      [5] N. R. S. Rizal, A. Jumahat, U. R. Hashim, and M. S. Omar, “Effect of pet parison size on injection moulding mould design,†J. Teknol., vol. 76, no. 6, pp. 115–119, 2015.

      [6] M. Huszar, F. Belblidia, H. M. Davies, C. Arnold, D. Bould, and J. Sienz, “Sustainable injection moulding: The impact of materials selection and gathete location on part warpage and injection pressure,†Sustain. Mater. Technol., 2015.

      [7] M. Moayyedian, K. Abhary, and R. Marian, “New Design Feature of Mold in Injection Molding For Scrap Reduction,†Procedia Manuf., 2015.

      [8] N. Rizal, S. Rizal, A. Mamat, and A. Jumahat, “SCIENCE & TECHNOLOGY Analysis of Fill Time and Injection Pressure of Multiple 20 gram Parisons during Injection Moulding Process,†vol. 25, pp. 233–240, 2017.

  • Downloads

  • How to Cite

    Shahriman Adenan, M., Zaira Azlan, M., B. Saedon, J., & M., A. (2018). Design and Analysis on Disposable Mouth Mirror. International Journal of Engineering & Technology, 7(4.36), 1541-1544. https://doi.org/10.14419/ijet.v7i4.36.29368