Fabrication and Characterization of Copper Matrix Composites Reinforced Silver-Coated Carbon Fibres

  • Authors

    • A Kamardin
    • MNB Derman
    • A Rahmat
    • MAA Mohd Salleh
    2018-11-30
    https://doi.org/10.14419/ijet.v7i4.30.28178
  • copper-carbon fibre composite, electroless copper, electroless silver, thermal expansion, thermal conductivity.
  • Silver interface was developed to improve the thermal properties of copper matrix reinforced carbon fibre. The composites were made by coating the carbon fibres with silver and copper layers via the electroless coating process. The thermal conductivity and the thermal expansion of the composites were profiled by means of JMP Pro software. The experimental results showed that the weight-percent of silver and the volume-percent of the carbon fibre have significant effect on the thermal properties of the composites. The thermal conductivity and thermal expansion of the composites were also profoundly influenced by the anisotropic structure of the composites.

     

     

  • References

    1. [1] W. Arden (2006), Future semiconductor material requirements and innovations as projected in the ITRS 2005 roadmap. Materials Science and Engineering: B 134, 104-108.

      [2] A. B. Kahng (2013), in 50th ACM/EDAC/IEEE Design Automation Conference (DAC), 1-6.

      [3] J. KováÄik, Å . Emmer, J. Bielek (2015), Thermal conductivity of Cu-graphite composites. International Journal of Thermal Sciences 90, 298-302.

      [4] H. Bai et al. (2013), Thermo-physical properties of boron carbide reinforced copper composites fabricated by electroless deposition process. Materials & Design 46, 740-745.

      [5] Q. Liu et al. (2013), Fabrication and thermal conductivity of copper matrix composites reinforced with Mo2C or TiC coated graphite fibres. Materials Research Bulletin 48, 4811-4817.

      [6] Z. Tao, Q. Guo, X. Gao, L. Liu (2011), The wettability and interface thermal resistance of copper/graphite system with an addition of chromium. Materials Chemistry and Physics 128, 228-232.

      [7] L. Yang, P. Shen, Q. Lin, F. Qiu, Q. Jiang (2011), Effect of Cr on the wetting in Cu/graphite system. Applied Surface Science 257, 6276-6281.

      [8] Y. Liu, C. Zhang, S. Qiao, Z. Yang (2010), Fabrication and Microstructure of C/Cu Composites. Advanced Engineering Materials 12, 493-496.

      [9] Veillère et al. (2011), Relationship between interphase chemistry and mechanical properties at the scale of micron in Cu–Cr/CF composite. Acta Materialia 59, 1445-1455.

      [10] W. F. Gale, T. C. Totemeier (2004), Physical and Mechanical Properties of Engineering Ceramics, Smithells Metals Reference Book (8th Edition). (Elsevier), pp. 3.

      [11] M. Inagaki et al. (1991), Studies on "Mesophase"-Pitch-Based Carbon Fibers: Part I Structure and Textures. TANSO 147, 57-65.

      [12] Y. Tanabe et al. (1991), Studies on "Mesophase"-Pitch-Based Carbon Fibers: Part II Mechanical Properties and Thermal Expansion. TANSO 147, 66-73.

      [13] S.-Y. Chang, J.-H. Lin, S.-J. Lin, T. Kattamis (1999), Processing copper and silver matrix composites by electroless plating and hot pressing. Metallurgical and Materials Transactions A 30, 1119-1136.

      [14] C. W. M. Yuen et al. (2013), Polyester metallisation with electroless silver plating process. Fibres and Polymers 14, 82-88.

      [15] M. Tao et al. (2016), Selective electroless silver plating of optical fibre probes with protruding tips. Microsystem Technologies 22, 2487-2491.

      [16] A. Kamardin, M. N. B. Derman, A. Rahmat, W. Z. A. W. Muhamad, Profiling the thermal properties of Cu-Ag/CF composites by using JMP Pro. AIP Conference Proceedings 2013, 020002 (2018).

      [17] A. Veillère et al. (2012), Influence of the interface structure on the thermo-mechanical properties of Cu–X (X=Cr or B)/carbon fibre composites. Materials Research Bulletin 47, 375-380.

      [18] Z. Tao, Q. Guo, X. Gao, L. Liu (2011), The wettability and interface thermal resistance of copper/graphite system with an addition of chromium. Materials Chemistry and Physics 128, 228-232.

      [19] Q. Liu et al. (2013), Fabrication and thermal conductivity of copper matrix composites reinforced with Mo2C or TiC coated graphite fibers. Materials Research Bulletin 48, 4811-4817.

  • Downloads

  • How to Cite

    Kamardin, A., Derman, M., Rahmat, A., & Mohd Salleh, M. (2018). Fabrication and Characterization of Copper Matrix Composites Reinforced Silver-Coated Carbon Fibres. International Journal of Engineering & Technology, 7(4.30), 568-572. https://doi.org/10.14419/ijet.v7i4.30.28178