Online Validation of Relay based Identification and Controller Design with an Anti-Reset Windup for a Binary Distillation Column

Authors

  • Eadala Sarath Yadav
  • Thirunavukkarasu Indiran
  • Shanmuga Priya Selvanathan
  • Ganesh UG

DOI:

https://doi.org/10.14419/ijet.v7i4.19.27948

Keywords:

FOPDT, Sustained oscillations, Sequential relay, auto tuning, pade approximation.

Abstract

Sequential auto-tuning based model identification is a closed loop approach, which has an extensive benefit compared to conventional methods because of user defined manipulated gain to the process within the verge of instability. Model parameters estimation of multi input multi output process is challenging because of existence of multivariable interaction among the variables. In this paper ideal relay is used as a sequential basis for binary distillation column in real time. Obtaining sustained oscillations in conventional methods is based on trial and error, benefit of relay is that oscillations can be generated as scaling of user defined gains. Predictive PI control algorithm is implemented. Results depicts the efficiency of methodology and importance of anti-reset term in the algorithm.

 

 

References

[1] V. Sujatha and Rames C. Panda,“Relay Feedback-Based Time Domain Modelling of Off-Diagonal Elements of Linear 2-by-2 Mimo Systemsâ€, the Canadian journal of chemical engineering, vol. 91, pp 271-278, 2013.

[2] Swapnil Nema and Prabin Kumar Padhy, “Identification of two-input two-output process using state space analysisâ€, IET Control Theory Appl., Vol. 9, Iss. 13, pp. 2029–2038, 2015.

[3] Rames C. Panda and V. Sujatha, “Identification and Control of Multivariable Systems – Role of Relay Feedbackâ€, Introduction to PID Controllers - Theory, Tuning and Application to Frontier Areas, Chapter.5, ISBN 978-953-307-927-1, pp. 105-132, 2012.

[4] Eadala Sarath Yadav and Thirunavukkarasu Indiran, “Relay Based identification and control of SISO process –An experimental approach via conical tankâ€, International Journal of Pure and Applied Mathematics, volume 118 (20), 2018

[5] Jong-Woo Choi and Sang-Cheol Lee “Antiwindup Strategy for PI-Type Speed Controller†IEEE Transactions on Industrial Electronics, Vol. 56, Iss. 6, pp. 2039-2046, 2009

[6] V. Sujatha and Rames C. Panda, “Relay Feedback-Based Time Domain Modelling of Off-Diagonal Elements of Linear 2-by-2 MIMO Systemsâ€, The Canadian Journal of Chemical Engineering, Vol. 91, pp. 271-278, 2013

[7] Paulo A. Martin et al., “Robust model predictive control of a pilot plant distillation columnâ€, Control Engineering Practice, Vol. 21, pp. 231-241, 2013

[8] Eadala Sarath Yadav , Thirunavukkarasu Indiran and Nikita Shankar “Optimal Actuation of Controller using Predictive PI for Nonlinear Level Process†Vol 9, Iss 34, pp. 1-4, 2016

[9] Antonio Visioli. Practical PID Control. British Library Cataloguing in Publication Data: ISBN-13: 9781846285851 ISBN-10: 1846285852, Springer-Verlag London Limited 2006

Downloads

Published

2018-11-27