Optimization Approach to Flat Slab Reinforced Concrete Building Frame Design

  • Authors

    • Sergii Mykytenko
    • . .
    2018-10-13
    https://doi.org/10.14419/ijet.v7i4.8.27232
  • flat slab column conduit, reinforced concrete building frame, affordable housing, structural-parametric optimization.

  • In the article it is proposed to use optimization methods for the flat slab reinforced concrete frames design in order to reduce the reinforced steel and concrete costs during the construction. The use of flat slab reinforced concrete frames is a promising direction for providing citizens with affordable housing. It is proposed to implement rational design of flat slab reinforced concrete building frames using the methods of structural-parametric optimization and discrete-continuous mathematical programming. To solve the problem, conditional optimization methods are applied. The algorithm for calculating the frame of a multi-storey building has been developed. The algorithm is implemented by available means and does not require the creation of special computer programs. The author of the article implements a combination of discrete and continuous optimization methods for reinforced concrete structures calculation. This method application allows to design efficient flat slab reinforced concrete frames for the affordable housing construction.

     

     


     

  • References

    1. [1] Onyshchenko V, Pavlikov A, Mykytenko S (2016), Implementation Of Flat Slab Column Reinforced Concrete Frames In Low Cost Housing Construction, Inzynieria Bezpieczenstwa Obiektow Antropogenicznych, №3, pp. 29–33.

      [2] Pohribnyi V, Dovzhenko О, Maliovana O (2018), The Ideal Plasticity Theory Usage Peculiarities to Concrete and Reinforced Concrete. International Journal of Engineering & Technology, Vol. 7(3.2), pp: 19–26, http://dx.doi.org/10.14419/ijet.v7i3.2.14369.

      [3] Pavlikov Ð, Mykytenko S, Hasenko A (2018), Effective structural system for the affordable housing construction, International Journal of Engineering & Technology, Vol. 7(3.2), pp: 291–298. http://dx.doi.org/10.14419/ijet.v7i3.2.14422.

      [4] Di Stasio J (1941), Flat Plate Rigid Frame Design Of Low Cost Housing Projects In Newark And Atlantic City. N. J. Proc. American Concrete Institute, Vol. 37, pp. 309–324.

      [5] Blakey FA (1965), Towards an Australian structural form – the flat plate. Architecture in Australia, Vol. 54, pp. 115–127.

      [6] Hadi MN, Sharafi P, Teh LH (2012), A new formulation for the geometric layout optimisation of flat slab floor systems Australasian Structural Engineering Conference (ASEC 2012) pp. 1-8, available online: http://ro.uow.edu.au/cgi/viewcontent.cgi?article= 3014&context=eispapers, last visit: 22.09. 2018.

      [7] Patil KS, Gore NG, Salunke PJ (2014), Minimum Cost Design of Reinforced Concrete Flat Slab. International Journal of Recent Technology and Engineering (IJRTE), Vol. 2, â„–6, pp.78-80.

      [8] Sahab MG (2008), Sensitivity of the optimum design of reinforced concrete flat slab buildings to the unit cost components and characteristic material strengths. Asian Journal Of Civil Engineering (Building And Housing) Vol. 9, â„– 5, pp.487-503.

      [9] Zandi Y, Naziri R, Hamedani R (2013) Effect of Layout and Size Optimization Conditions in Architectural Design of Reinforced Concrete Flat Slab Buildings. Bulletin of Environment, Pharmacology and Life Sciences, Vol 2 (5), pp. 62-68.

      [10] Kochkarev, D., & Galinska, T. (2017). Calculation methodology of reinforced concrete elements based on calculated resistance of reinforced concrete. Paper presented at the MATEC Web of Conferences, , 116 https://doi.org/10.1051/matecconf/201711602020

      [11] Piskunov, V. G., Goryk, A. V., & Cherednikov, V. N. (2000). Modeling of transverse shears of piecewise homogeneous composite bars using an iterative process with account of tangential loads. 1. construction of a model.Mechanics of Composite Materials, 36(4), 287-296. doi:10.1007/BF02262807

      [12] Piskunov, V. G., Gorik, A. V., & Cherednikov, V. N. (2000). Modeling of transverse shears of piecewise homogeneous composite bars using an iterative process with account of tangential loads 2. resolving equations and results. Mechanics of Composite Materials, 36(6), 445-452. https://doi.org/10.1023/A:1006798314569

  • Downloads

  • How to Cite

    Mykytenko, S., & ., . (2018). Optimization Approach to Flat Slab Reinforced Concrete Building Frame Design. International Journal of Engineering & Technology, 7(4.8), 157-161. https://doi.org/10.14419/ijet.v7i4.8.27232