Development of Automated BIM Data Quality Pre-Check (BDQPC) System in Architectural Design Phase

  • Authors

    • Jungsik Choi
    • Inhan Kim
    • Jihye Shin
    https://doi.org/10.14419/ijet.v8i1.4.25460
  • Building Code Checking, Building Information Modeling (BIM), Data Quality, Industry Foundation Classes (IFC), Pre-Checking

  • Recently, the mandates on utilizing Building Information Modeling (BIM) implemented by the public institutions of many countries have had a great impact on the significantly increasing practices of BIM. BIM is a technology that supports a process of information exchange and communication by integrating, interchanging, and reusing data during the building lifecycle. The improvement of work efficiency and productivity that comes with BIM adoption depends on the consistency and accuracy of data. To maximize the benefit of BIM, interest in BIM data quality has been increasing all over the world. The delivery of BIM data is mandatory in advanced countries, and these countries are promoting automated BIM quality checking. The BIM data quality pre-check (BDQPC), which is conducted by a designer in the design phase, offers opportunities for quality improvement by continuously assessing BIM data. However, the BIM quality pre-check is being conducted under the arbitrary interpretation of users because of the absence of specific review factors and assessment methods for checking BIM quality. The purpose of this study is to suggest an automated BIM quality pre-checking system to improve BIM design quality effectively and efficiently. It is expected to meet the owner’s requirements and to minimize the additional cost and time incurred from revising and reproducing data by ensuring its consistency and accuracy.

     

     

  • References

    1. [1] Zhang C, Beetz J & Weise M. (2015), Interoperable validation for IFC building models using open standard, Journal of Information Technology in Construction, Vol.20, 24-39.

      [2] Kim IH, Cho GH & Choi JS (2010), A case study of BIM quality assurance for the target of super-tall buildings, Proceeding of the 18st Journal of the Architectural Institute of Korea, Vol.30, No.1, 23-24.

      [3] Choi JH & Kim IH (2014), A study on the application of pre-processing of develop the open BIM-based code checking system for building administration process, Journal of the Architectural Institute of Korea (Planning and Design), Vol.30, No.9, 3-10.

      [4] Eastman C, Lee JM, Jung YS & Lee JK (2009), Automatic rule-based checking of building designsâ€, Automation in Construction, 18, 1011-1033.

      [5] Kim IH, Kim MC & Choi JS (2015), Improvement of Open BIM-based Building Permission Process Using EPI (Energy Performance Index), Korean journal of construction engineering and management, Vol.16, No.6, 124-135.

      [6] Choi JH (2014), A Study on the Development of Code Checking System for Building Administration Process Applying Open BIM-based Process, M.A. Thesis, Kyung Hee Univ.

      [7] buildingSMART International, http://www.buildingsmart.org

      [8] Koo BS & Shin BJ (2017), Using Geometry based Anomaly Detection to Check Integrity of IFC classifications in BIM Models, Proceedings of the Society for Computational Design and Engineering Conference, 534-536.

      [9] Seo JC, Kim HJ & Kim IH (2012), Open BIM-Based Quality Control for Enhancing the Design Quality in the Architectural Design Phase, Korean Journal of Construction Engineering and Management, Vol.14, No.4, 3-15.

      [10] Kwon OC, Jo CW & Cho JW (2012), A Study on the Systematization of Open BIM Data Quality Management, Journal of the Architectural Institute of Korea (Structure & Construction), Vol.28, No.2, 105-112.

      [11] Song JK, Ju KB (2013), Development of Rule for Quality Checking Items to Raise Quality of BIM Model-Focusing on the Domestic BIM Guidelines-, Korean Journal of Construction Engineering and Management, Vol.14, No. 5, pp.131-143.

      [12] Kim IH, Kim YH & Choi JS (2015), Building Code Typology and Application for Open BIM based Code Checking, Transactions of the Society of CAD/CAM Engineers, Vol.19, No.3 224-235.

      [13] Project management Institute (2004), Project management body of knowledge, 3rd Ed., USA, p.413.

      [14] NIBS (2006), Overview Building Information Models.

      [15] Choi JS & Kim IH (2015), Development of an Open BIM-based Legality System for Building Administration Permission Services, Journal of Asian Architecture and Building Engineering, Vol.14, No.3, 577-584.

      [16] Azhar S, Nadeem, A, Mok, J & Leung B (2008), Building Information Modeling (BIM): A New Paradigm for Visual Interactive Modeling and Simulation for Construction Projects, First International Conference on Construction in Developing Countries (ICCIDC–I), 4th-5th August, Pakistan.

      [17] MLTM (Ministry of Land Transport and Maritime Affairs) (2010), BIM Guide of Ministry of Land Transport and Maritime Affairs.

      [18] Choi JS & Kim IH (2011), Interoperability Tests of IFC Property Information for Open BIM based Quality Assurance. Transactions of the Society of CAD/CAM Engineers, Vol.16, No.2, 92-103.

      [19] PPS (2015), BIM Guide of Public Procurement Service v1.3.

      [20] KPX (2010), Korea Power Exchange Headquarters building construction Design competition Guideline.

      [21] GSA (2007), 3D-4D Building Information Modeling BIM Guide Series.

      [22] Statsbygg (2011), Statsbygg Building Information Modelling Manual Version 1.2.

      [23] Henttinen, T (2012), COBIM Common BIM Requirements 2012 Series 6: Quality assurance

      [24] Ministry of Government Legislation, http://www.moleg.go.kr

      [25] SEUMTER, http://www.eais.go.kr

      [26] Choi JS & Lee MJ (2016), Findings from the Korea Government-funded BIM R&D Project. The BIM, Vol.16, 12-14.

      [27] Ding L, Drogemuller R, Rosenman M, Marchant D & Gero J (2006), Automating code checking for building designs, in: K. Brown, K. Hampson, P. Brandon (Eds.), Clients Driving Construction Innovation: Moving Ideas into Practice, CRC for Construction Innovation, Brisbane, Australia, 1-16.

      [28] Kim YR, Lee SH & Park SH (2012), Development of Rule-Set Definition for Architectural Design Code Checking based on BIM - for Act on the Promotion and Guarantee of Access for the Disabled, the Aged, and Pregnant Women to Facilities and Information, Korean Journal of Construction Engineering and Management, Vol.13, No.6, 143-152.

      [29] Jeong JY & Lee G (2008), A Study on the Possibility of using BIM in Automated Building Code Checking for Egress and Anti-disaster Regulations for Large-scale Buildings, Proceeding of the Korean Journal of Construction Engineering and Management, 871-872.

      [30] Moon HS, Kim CY, Cho GH & Ju KB (2016), An Object Quality Verification Method for BIM Libraries based on Standardized Drawings in Civil Projects -Focusing on Retaining Wall Case, Journal of the Korea Academia-Industrial cooperation Society, Vol.17, No.4, 129-137.

      [31] Jo CW (2016), A Study on Information Systematization of Detail Drawings for Connectivity between BIM Libraries and Technical Contents based on Information Framework, Journal of the Korea Academia-Industrial cooperation Society, Vol.17, No.10, 54-60.

      [32] Lee SH, Park SI, Jang YH & Choi KW (2017), IFC Model Data Retrieval and Regeneration Method through Property Set-based Query Language, Journal of the Korea Academia-Industrial cooperation Society, Vol.18, No.2, 38-46.

      [33] Park SH & Hong CH (2017), A Study for BIM based Evaluation and Process for Architectural Design Competition -Case Study of Domestic and International BIM-based Competition-, Journal of the Korea Academia-Industrial cooperation Society, Vol.18, No.2, 23-30.

      [34] Choi JS & Kim IH (2017), Development of Rule-based Building Code Compliance Checking System for BIM-based Quality Improvement, Information – An International Interdisciplinary Journal, Vol.20, No.4(B), 2929-2936.

      [35] Shekhawat K (2017), A computer-generated plus-shaped arrangement and its architectural applications, Journal of Computational Design and Engineering, Vol.4, No.4, 318-329.

      [36] Vimal JS, Ghanshyam GT, Vivek KP & Poonam S (2017), Modified meta-heuristics using random mutation for truss topology optimization with static and dynamic constraints, Journal of Computational Design and Engineering, Vol.4, No.2, 106-130.

  • Downloads

  • How to Cite

    Choi, J., Kim, I., & Shin, J. (2019). Development of Automated BIM Data Quality Pre-Check (BDQPC) System in Architectural Design Phase. International Journal of Engineering & Technology, 8(1.4), 492-499. https://doi.org/10.14419/ijet.v8i1.4.25460