Use of Thermo-Modified Wood Massif in Making Parametric Exterior Furniture

  • Authors

    • A. R. Shaikhutdinova
    • R. R. Safin
    • F. V. Nazipova
    • S. R. Mukhametzyanov
    2018-12-09
    https://doi.org/10.14419/ijet.v7i4.36.25045
  • Engineering, Design, Wood, CNC

  • This paper proposes the use of an array of heat-treated wood of various species to make parametric furniture for the purpose of operation in the exterior, and on objects in conditions of high humidity. The dependence of change in the color range of thermowoods depending on the temperature and duration of treatment is presented. Experiments were carried out to study the biological stability of thermally modified wood treated by various technologies including: vacuum-convective thermal modification in superheated steam, convective thermal modification in high-pressure saturated steam, as well as in hydrophobic liquids, in flue gas and vacuum-conductive thermal-modifying. The degree of resistance of wood was determined, which allows to conclude that the mass losses of heat-treated specimens caused by the destructive action of fungi are significantly lower compared to untreated ones. The researchwas conducted to determine the numerical characteristics of microroughness of the polished surface of wood, thermally modified at different temperatures. 

     

     

  • References

    1. [1] S. Ates, M. H. Akyildiz, H. Ozdemir, Effects of heat treatment on calabrian pine (pinus brutia ten.) wood, BioResources, 2009, Volume 4, Issue 3, p. 1032-1043.

      [2] X. Wang, X. Chen, X. Xie, Y. Wu, L. Zhao, Y. Li, S. Wang, Effects of thermal modification on the physical, chemical and micromechanical properties of masson pine wood (pinus massoniana lamb.), Holzforschung, 2018, Volume 72, Issue 8, p.701-709.

      [3] R. R. Safin, R. R. Khasanshin, S. R. Mukhametzyanov, Influence of Technical Parameters of Disk-Shaped Reactor on Productivity of Heat Treatment of Crushed Wood, IOP Conference Series: Materials Science and Engineering [Internet], 2018, Volume 327, 042095

      [4] N. R. Galyavetdinov, R. R. Safin, A. E. Voronin, Analysis of physico-mechanical properties of composites based on polylactide and thermally modified wood fibers, Materials Science Forum, 2016, Volume 870, p. 202-206.

      [5] P. Navi, F. Girardet, Effects of thermo-hydro-mechanical treatment on the structure and properties of wood, Holzforschung, 2000, Volume 54, Issue 3, p. 287-93.

      [6] E. Windeisen, C. Strobel, G. Wegener, Chemical changes during the production of thermo-treated beech wood, Wood Sci Technol, 2007, Volume 41, Issue 6, p. 523-36.

      [7] R. R. Safin, Š. Barcík, A. R. Shaikhutdinova, P.A. Kaynov, E. Razumov, Development of the energy-saving technology of thermal modification of wood in saturated steam, Acta Facultatis Xylologiae, 2015, Volume 57, Issue 2, p. 39-47.

      [8] N. R. Galyavetdinov, R. R. Safin, E. Beliakova, A. R. Shaikhutdinova, F. V. Nazipova, The energy saving in the process of thermomodification of wood in liquids, International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM, 2016, Volume 1, Issue 4, p. 309-316.

      [9] N. R. Galyavetdinov, R. R. Safin, A. E. Voronin, A. R. Shaikhutdinova, The mathematical modeling of the wood greenery extraction processes, Proceedings of 2015 International Conference on Mechanical Engineering, Automation and Control Systems, 2015, p. 1-4.

  • Downloads

  • How to Cite

    R. Shaikhutdinova, A., R. Safin, R., V. Nazipova, F., & R. Mukhametzyanov, S. (2018). Use of Thermo-Modified Wood Massif in Making Parametric Exterior Furniture. International Journal of Engineering & Technology, 7(4.36), 1112-1116. https://doi.org/10.14419/ijet.v7i4.36.25045