Automated Prediction of Critical States of Turbogenerators During Thermal Expansion of a Rotor and a Stator Based on a Recurrent Neural Network

  • Authors

    • Dmitry Aleksandrovich Akimov
    • Sergey Aleksandrovich Pavelyev
    • Valery Dmitrievich Ivchenko
    2018-12-03
    https://doi.org/10.14419/ijet.v7i4.38.24316
  • Turbogenerators, Rotor Vibrations, Vibrodiagnostics, Thermal Expansion, Thermal Influence, Forecasting, Critical State, Deep Machine Training, Neural Network, Recurrent Neural Network, Rnn, Heat Effects Assessment, Trouble Effects Evaluation, Troubleshoot
  • The present article is devoted to the development of a method and its software implementation for forecasting the critical states of a turbogenerator and its design elements that arise during starting-up & adjustment works and stopping a turbine. The method is based on a short-term prediction of the image of the spectrogram of vibrations during thermal expansion of the rotor and stator. The dependence of the increase in the vibration level in the spectrum with the failure of the turbogenerator design element is substantiated. The model takes into account the influence of thermal expansion on critical states. The technique of training a deep neural network is given in the classification of thermal influences on the level of vibration while a spectrogram receiving. For machine learning of a neural network in software, a recurrent autoencoder is used. The technique of operation is with a time sequence of spectrograms. To test the model is introduced the concept of semantic quality of clustering. Semantic quality, determined as the degree of correspondence between the information that can be extracted from the obtained cluster structure and the formalized presentation of the user. The interpretation of the results of the discovery of turbine generator defects is presented.

     

     

     
  • References

    1. [1] Stone GC, Boulter EA, Culbert I, et al. (2014), Electrical Insulation for Rotating Machines, 2nd ed. Hoboken NJ: Wiley.

      [2] Ponce HO, Gott B, Stone G (2011), Generator Stator Endwinding Vibration Guide: Tutorial, EPRI, Project Evaluation â„– 6382.

      [3] Shabaev VM, Kazantsev AS, Leontiev MK, Garanin IV, Karasev VA (2007), Vibration diagnosis of rolling bearing damages during assembly and assembly of heavy rotor assemblies. Control. Diagnosis. Moscow: Spectrum, 11, 18-27.

      [4] Kuchinskii KA (2010), Investigation of a thermal and thermomechanical condition of elements of a rotor in an active zone of turbogenerator TGV-300 when available of defects of cooling. Pratsi Instytutu Elektrodynamiky Natsionalnoi Akademii Nauk Ukrainy, 27, 46-51.

      [5] Titko AI, Kuchinskii KA, Akhremenko VL, Osadchii EP (2006), Influence of the asymmetric temperature field on a vibrating condition of a rotor of electric machines. Pratsi Instytutu Elektrodynamiky Natsionalnoi Akademii Nauk Ukrainy, 3(15), 33-40.

      [6] Akimov DA, Rabotkin VD, Teryokhin IV, Redkin OK (2013), Representation of knowledge in distributed information systems of industrial enterprises. Industrial control systems and controllers. Nauchtekhlitizdat, 1, 33-38.

      [7] Okhtilev MYu, Sokolov BV, Yusupov RM (2006), Intellectual technologies for monitoring and managing the structural dynamics of complex technical objects. Moscow: Nauka, 410.

      [8] Lee JY, Dernoncourt F (2016), Sequential Short-Text Classification with Recurrent and Convolutional Neural Networks. Proceedings of NAACL-HLT, 515-520.

      [9] Ostroukh A, Nikonov V, Ivanova I, Sumkin K, Akimov D (2014), Development of the contactless integrated interface of complex production lines. Journal of Artificial Intelligence, 7(1), 1-12.

      [10] Akimov D, Krug P, Ostroukh A, Ivchenko V, Morozova T, Sadykov I (2016), The Simulation Model of the Autonomous Truck Caravan in the Extreme and Non-Stationary Environment. International Journal of Applied Engineering Research, 11(9), 6435-6440.

      [11] Nazolin AL, Polyakov VI (2005), Vibroacoustic diagnostics and stator monitoring. OOO NTC "Resurs".

      [12] Akimov DA (2011), Application of computer vision in the work of control operators at industrial facilities. Industrial control systems and controllers. Nauchtekhlitizdat, 5, 1-6.

      [13] Morozova TYu, Bekarevich AA, Budadin ON (2104), A new approach to identifying defects in product materials. Control. Diagnostics, 8(194), 42-48.

  • Downloads

  • How to Cite

    Aleksandrovich Akimov, D., Aleksandrovich Pavelyev, S., & Dmitrievich Ivchenko, V. (2018). Automated Prediction of Critical States of Turbogenerators During Thermal Expansion of a Rotor and a Stator Based on a Recurrent Neural Network. International Journal of Engineering & Technology, 7(4.38), 37-40. https://doi.org/10.14419/ijet.v7i4.38.24316