A Study on a Focus Value Quantification Algorithm Applicable to the Vision System

  • Authors

    • Seong-Ik Kim
    • Koo-Rack Park
    • Dong-Hyun Kim
    https://doi.org/10.14419/ijet.v7i3.24.22673
  • Vision System, Focus Value, Semiconductor Package, Calibration Plate, Focus Control

  • Background/Objectives: Recent development of the IT industry has led to active convergence among industries, and the field of semiconductors has especially shown decreasing size and weight of products. As smaller products are resulting in management of production processes using the vision system, this paper proposes a focus value quantification algorithm to acquire images for the detection of defects in semiconductor packages.

    Methods/Statistical analysis: An active focus measurement method that uses an image processing technique to improve autofocusing efficiency of camera lenses by enhancing the detection of defects in semiconductor packages was applied. After acquiring images of target packages, the SMD(Sum Modules Difference), Tenengrad, SML(Sum Modified Laplacian) and LOG(Laplacian of Gaussian) algorithms were used on the acquired images to calculate focus values. Quantification was performed on a large quantity of focus values.

    Findings: Camera is a very important device in the vision system, and adjusting focus of camera lenses is essential in acquiring accurate images to detect defects in semiconductor packages. In general, time required for focus adjustment is determined as the sum of time taken to calculate the focus value for moving a camera to the image acquisition position and time taken to calculate the focus value from the acquired image. It would be necessary for users and hosts at industrial sites to perform interpretation of the focus value quickly and accurately. However, since various existing algorithms have extremely large focus values and are difficult to interpret, this paper proposes an algorithm that can interpret focus values quickly through quantification. Based on the comparison of information before and after quantification, the position of maximum focus value was measured to be the same. The proposed algorithm can increase efficiency of semiconductor package testing by shortening time required to interpret the focus value in the device configuration stage.

    Improvements/Applications: Future studies should be conducted on an algorithm to improve speed of focus value calculation and an algorithm to acquire image according to wavelength of lighting and conditions of lenses.

     

  • References

    1. [1] Janóczki, M., Becker, Ã., Jakab, L., Gróf, R., & Takács, T. Automatic Optical Inspection of Soldering. Material Science-Advanced Topics. 2013:387-441. DOI: 10.5772/51699.

      [2] Miran Burmen, Franjo Pernuš and Boštjan Likar. LED Light Sources: A Survey of Quality-Affecting Factors and Methods for Their Assessment. Measurement and Science Technology. 2008;19(12). DOI: 10.1088/0957-0233/19/12/122002.

      [3] Lu, S. L., Zhang, X. M., &Kuang, Y. C. Optimized design of an AOI illuminator. International Conference on Wavelet Analysis and Pattern Recognition. IEEE. 2007;2:924-928. DOI: 10.1109/ICWAPR.2007.4420801.

      [4] Roh, Y. J., Lee, D. Y., Kim, M. Y., & Cho, H. Visual inspection system with flexible illumination and autofocusing. In Optomechatronic Systems III. International Society for Optics and Photonics. 2002 Oct;4902:463-476.

      [5] Wang, W., Yan, J., Xu, N., Wang, Y., & Hsu, F. H. Real-time high-quality stereo vision system in FPGA. IEEE Transactions on Circuits and Systems for Video Technology. 2015;25(10):1696-1708. DOI: 10.1109/TCSVT.2015.2397196.

      [6] Krastev, E., Bernard, D., &Nordson, D. A. G. E. MODERN 2D/3D X-RAY INSPECTION--EMPHASIS ON BGA, QFN, 3D PACKAGES, AND COUNTERFEIT COMPONENTS. In SMTA Pan Pacific Symposium. 2010 January. Available from : https://smtnet.com/library/files/upload/EMPHASIS-O N -BGA-QFN.pdf

      [7] Krotkov, E. Focusing. International Journal of Computer Vision, 1987;1(3):223-237.

      [8] Chern, N. K., Neow, P. A. and Ang Jr., M. H. Practical Issues in Pixel-Based Autofocusing for Machine Vision. Proceedings of the 2001 IEEE International Conference on Robotics and Automation, Seoul, Korea. 2001 May:2791-2796.

      [9] Choi, K. S., Lee, J. S., &Ko, S. J. New autofocusing technique using the frequency selective weighted median filter for video cameras. IEEE transactions on Consumer Electronics. 1999;45(3):820-827. DOI: 10.1109/30.793616.

      [10] S. Nayar and Y. Nakagawa. Shape from focus. IEEE Trans. Pattern Analysis and Machine Intelligence. 1994 August;16:824-831.

      [11] Saffari, V., Ghazimoradi, A., &Alirezanejad, M. Effect of laplacian of gaussian filter on watermark retrieval in spatial domain watermarking. Indian Journal of Science and Technology. 2015;8(33). DOI: 10.17485/ijst/2015/v8i33/71226.

  • Downloads

  • How to Cite

    Kim, S.-I., Park, K.-R., & Kim, D.-H. (2018). A Study on a Focus Value Quantification Algorithm Applicable to the Vision System. International Journal of Engineering & Technology, 7(3.24), 300-303. https://doi.org/10.14419/ijet.v7i3.24.22673