Determination of Critical Overload Transmission Line Using Novel Maximum Power Line Stability Index

  • Abstract
  • Keywords
  • References
  • PDF
  • Abstract

    Recent years, a larger number of DG’s are being employed especially at the critical load ends to reduce the burden on the main feeder. One of the benefits of employing DG that it improves the system voltage stability even with load increment. The primary focus of this paper rests on creating a novel line voltage stability index. The line stability index approach is proposed based on Thevenin theory to gauge the DG level impact on transmission line. Transmission issues due to the overloading of lines in high DG penetration areas during the outage scenarios taking place earlier. The rationale for the proposed strategy will be experimented on a standard IEEE 30 bus test system compared with other line voltage stability indexes.

  • References

      [1] Jauch C, Matevosyan J, Ackermann T, Bolik S. International comparison of requirements for connection of wind turbines to power systems. Wind energy. 2005;8(3):295-306.

      [2] Eriksen PB, Ackermann T, Abildgaard H, Smith P, Winter W, Garcia JR. System operation with high wind penetration. IEEE Power and Energy Magazine. 2005;3(6):65-74.

      [3] Piwko R, Osborn D, Gramlich R, Jordan G, Hawkins D, Porter K. Wind energy delivery issues [transmission planning and competitive electricity market operation]. IEEE Power and Energy Magazine. 2005;3(6):47-56.

      [4] Karbalaei F, Soleymani H, Afsharnia S, editors. A comparison of voltage collapse proximity indicators. IPEC, 2010 Conference Proceedings; 2010: IEEE.

      [5] Conroy J, Watson R. Low-voltage ride-through of a full converter wind turbine with permanent magnet generator. IET Renewable Power Generation. 2007;1(3):182-9.

      [6] Mullane A, Lightbody G, Yacamini R. Wind-turbine fault ride-through enhancement. IEEE Transactions on Power Systems. 2005;20(4):1929-37.

      [7] Ummels BC, Gibescu M, Pelgrum E, Kling WL, Brand AJ. Impacts of wind power on thermal generation unit commitment and dispatch. IEEE Transactions on energy conversion. 2007;22(1):44-51.

      [8] Causebrook A, Atkinson DJ, Jack AG. Fault ride-through of large wind farms using series dynamic braking resistors (March 2007). IEEE Transactions on power systems. 2007;22(3):966-75.

      [9] Molinas M, Suul JA, Undeland T. Low voltage ride through of wind farms with cage generators: STATCOM versus SVC. IEEE Transactions on power electronics. 2008;23(3):1104-17.

      [10] Acharya N. Security, protection, and control of power systems with large-scale wind power penetration: Iowa State University; 2010.

      [11] Vaziri M, Vadhva S, Oneal T, Johnson M, editors. Smart grid, distributed generation, and standards. Power and Energy Society General Meeting, 2011 IEEE; 2011: IEEE.

      [12] Energy G. The effects of integrating wind power on transmission system planning, reliability, and operations. Report on phase. 2005;2.

      [13] Di Florio G. Innovative model of product certification within the energy deregulated market. example of application to a smart energy area in the sector of local transport service. 2015.

      [14] Hussain S, Kim Y-C, editors. Fault resilient communication network architecture for monitoring and control of wind power farms. Advanced Communication Technology (ICACT), 2016 18th International Conference on; 2016: IEEE.

      [15] Akorede MF, Hizam H, Pouresmaeil E. Distributed energy resources and benefits to the environment. Renewable and Sustainable Energy Reviews. 2010;14(2):724-34.

      [16] Viral R, Khatod D. Optimal planning of distributed generation systems in distribution system: A review. Renewable and Sustainable Energy Reviews. 2012;16(7):5146-65.

      [17] Hemdan N, Kurrat M, editors. Influence of distributed generation on different loadability aspects of electric distribution systems. CIRED, IET Conference; 2009: IET.

      [18] Boroyevich D, Cvetkovic I, Burgos R, Dong D. Intergrid: A future electronic energy network? IEEE Journal of Emerging and Selected Topics in Power Electronics. 2013;1(3):127-38.

      [19] Olivares DE, Mehrizi-Sani A, Etemadi AH, Cañizares CA, Iravani R, Kazerani M, et al. Trends in microgrid control. IEEE Transactions on smart grid. 2014;5(4):1905-19.

      [20] Hasani M, Parniani M, editors. Method of combined static and dynamic analysis of voltage collapse in voltage stability assessment. Transmission and Distribution Conference and Exhibition: Asia and Pacific, 2005 IEEE/PES; 2005: IEEE.

      [21] Manwell JF, McGowan JG, Rogers AL. Wind energy explained: theory, design and application: John Wiley & Sons; 2010.

      [22] Azmy AM, Erlich I, editors. Impact of distributed generation on the stability of electrical power system. Power Engineering Society General Meeting, 2005 IEEE; 2005: IEEE.

      [23] El-Khattam W, Salama M, editors. Impact of distributed generation on voltage profile in deregulated distribution system. Proceedings of the Power Systems 2002 Conference, Impact of Distributed Generation, Clemson, SC, USA; 2002.

      [24] Morison G, Gao B, Kundur P. Voltage stability analysis using static and dynamic approaches. IEEE transactions on Power Systems. 1993;8(3):1159-71.

      [25] Lamsal D, Mishra A, Gautam P, editors. Optimal location and sizing of distributed generation: B-coefficient matrix approach. Control and Automation (ICCA), 2016 12th IEEE International Conference on; 2016: IEEE.

      [26] Ettehadi M, Ghasemi H, Vaez-Zadeh S. Voltage stability-based DG placement in distribution networks. ieee transactions on power delivery. 2013;28(1):171-8.

      [27] Al Abri R, El-Saadany EF, Atwa YM. Optimal placement and sizing method to improve the voltage stability margin in a distribution system using distributed generation. IEEE transactions on power systems. 2013;28(1):326-34.

      [28] Weron R. Modeling and forecasting electricity loads and prices: A statistical approach: John Wiley & Sons; 2007.

      [29] Cherry DD. Optimal placement of distributed generation on a power system using particle swarm optimization: Mississippi State University; 2012.

      [30] Taylor SA, Baker TL. An assessment of the relationship between service quality and customer satisfaction in the formation of consumers' purchase intentions. Journal of retailing. 1994;70(2):163-78.

      [31] Kundur P, Balu NJ, Lauby MG. Power system stability and control: McGraw-hill New York; 1994.

      [32] Kundur P, Paserba J, Ajjarapu V, Andersson G, Bose A, Canizares C, et al. Definition and classification of power system stability IEEE/CIGRE joint task force on stability terms and definitions. IEEE transactions on Power Systems. 2004;19(3):1387-401.

      [33] Lopes JP, Hatziargyriou N, Mutale J, Djapic P, Jenkins N. Integrating distributed generation into electric power systems: A review of drivers, challenges and opportunities. Electric power systems research. 2007;77(9):1189-203.

      [34] Lof P-A, Andersson G, Hill D. Voltage stability indices for stressed power systems. IEEE transactions on power systems. 1993;8(1):326-35.

      [35] Moghavvemi M, Faruque M. Power system security and voltage collapse: a line outage based indicator for prediction. International Journal of Electrical Power & Energy Systems. 1999;21(6):455-61.

      [36] 36. Vaahedi E, Fuchs C, Xu W, Mansour Y, Hamadanizadeh H, Morison G. Voltage stability contingency screening and ranking. IEEE Transactions on power systems. 1999;14(1):256-65.

      [37] 37. Kumar YP, Raju HP. Static voltage stability margin enhancement using shunt compensating devices. 2013.

      [38] Musirin I, Rahman TA, editors. Novel fast voltage stability index (FVSI) for voltage stability analysis in power transmission system. Research and Development, 2002 SCOReD 2002 Student Conference on; 2002: IEEE.

      [39] Verbic G, Gubina F, editors. A novel concept for voltage collapse protection based on local phasors. Transmission and Distribution Conference and Exhibition 2002: Asia Pacific IEEE/PES; 2002: IEEE.

      [40] Moghavvemi M, Omar F. Technique for contingency monitoring and voltage collapse prediction. IEE Proceedings-Generation, Transmission and Distribution. 1998;145(6):634-40.

      [41] Chebbo A, Irving M, Sterling M, editors. Reactive power dispatch incorporating voltage stability. IEE Proceedings C (Generation, Transmission and Distribution); 1992: IET.

      [42] Schauder C, Gernhardt M, Stacey E, Lemak T, Gyugyi L, Cease T, et al. Development of a/spl plusmn/100 MVAr static condenser for voltage control of transmission systems. IEEE Transactions on Power Delivery. 1995;10(3):1486-96.

      [43] Glisson Jr TH. Complex Power. Introduction to Circuit Analysis and Design: Springer; 2011. p. 479-520.

      [44] Chebbo A, Irving M, Sterling M, editors. Voltage collapse proximity indicator: behaviour and implications. IEE Proceedings C (Generation, Transmission and Distribution); 1992: IET.

      [45] Wang C, Nehrir MH. Analytical approaches for optimal placement of distributed generation sources in power systems. IEEE Transactions on Power systems. 2004;19(4):2068-76.




Article ID: 22571
DOI: 10.14419/ijet.v7i4.28.22571

Copyright © 2012-2015 Science Publishing Corporation Inc. All rights reserved.