Design and Analysis of Fractional PID Controller for Isolated Bidirectional DC-DC Converter

 
 
 
  • Abstract
  • Keywords
  • References
  • PDF
  • Abstract


    The switching frequency of the bidirectional DC-DC converter is increased to make the size of the converter compact. This in turn results in higher switching losses. In order to overcome this drawback, a novel isolated bidirectional dc-dc converter (IBDC) is proposed. This work discuss about the performance of proposed IBDC. The performance of the proposed converter is evaluated using MATLAB /SIMULINK and the simulation results is verified with experimental results.

     

     


  • Keywords


    BDC, FPID controller, ZVS, Transient response

  • References


      [1] R. Sowmya, S. Rama Reddy. “Comparison of PI & fuzzy logic controlled dual active bridge DC to DC converter systems, International Journal of Electrical and Computer Sciences, 15(3), (2015), pp 21-29.

      [2] Amin Mirzaei, Awang jusoh and Zainal Salam, “Design and Implementation of High Efficiency Non Isolated Bidirectional Zero Voltage Transition Pulse With modulated DC-DC converters,” Elsevier, Energy,47, (2012), pp 358–369.

      [3] Preethi, S, I. Mahendiravarman, and M. Arunprakash. "Matlab/Simulink based closed Loop Control of Bi-Directional DC-DC Converter." International Journal of Engineering Science and Innovative Technology, 15(3), (2015), pp 21-29.

      [4] Digvijay B. Kanase, H.T. Jadhav and R.A. Metri. “Performance of DC to DC dual active bridge converter driving single phase inverter”, ARPN Journal of Engineering and applied sciences 10(4), (2015), pp 1927-1932.

      [5] Lee.D.Y, Kee.M. K, Hyun.D.S and Choy.I, “New zero-current-transition PWM DC/DC converters without Current Stress,” IEEE Trans. Power Electron., 18(1), (2003), pp 95–104.

      [6] S.Sheeba Rani, V.Gomathy and R.Geethamani, “Embedded design in synchronistaion of alternator automation” in International Journal of Engineering and Technology(IJET) , Volume No.7, 2018, pp 460-463, April 2018

      [7] Hua, G., Leu, C., Jiang, Y. and Lee, F. C., “Novel zero-voltage transition PWM converters,” IEEE Trans. Power Electron., 9(2), (1994), pp. 213– 219.

      [8] Ho-Sung Kim, Myung-Hyo Ryu,Ju-Won Back and Jee-Hoon Jung, “High-Efficiency Isolated Bidirectional AC-DC Converter for a dc Distribution System,” IEEE Trans. Power Electron., 28(4), (2013), pp.1642–1654.

      [9] Hua Han, Yonglu Liu, Yao Sun,Hui Wang and Mei Su,, “A Single Phase Current Source Bidirectional Converter for V2G Applications” Journal of Power Electronics, 14(3), (2014), pp. 458-467.

      [10] Huiqing Wen and BinSu, “Reactive Power and Soft-Switching Capability Analysis of Dual -Active –Bridge DC-DC Converters with Dual-Phase-Shift Control” Journal of Power Electronics, 15(1), (2015), pp.18–30.

      [11] Hyung-Min Ryu, “High Efficient High-Voltage MOSFET Converter with Bidirectional Power Flow Legs”, Journal of Power Electronics, 14(2), (2014), pp 265-270.

      [12] Jeong-il Kang, Sang-Kyoo Han and Jonghee Han, “Lossless Snubber with Minimum Voltage Stress for continuous Current Mode Tapped-Inductor Boost Converters for High Step-up Applications”, Journal of Power Electronics, 18(4), (2014), pp. 621–631.

      [13] K. C. Ramya., and V. Jegathesan. "Comparison of PI and PID controlled bidirectional dc-dc converter systems." International Journal of Power Electronics and Drive Systems, 7(1), (2016), pp 56-65.

      [14] Qin, Hengsi, and Jonathan W. Kimball. "Closed-loop control of DC–DC dual-active-bridge converters driving single-phase inverters." IEEE Transactions on Power Electronics,29(2), (2014), pp 1006-1017.


 

View

Download

Article ID: 22044
 
DOI: 10.14419/ijet.v7i4.19.22044




Copyright © 2012-2015 Science Publishing Corporation Inc. All rights reserved.