FEA Analysis of S-PMSG for Aircraft Application

 
 
 
  • Abstract
  • Keywords
  • References
  • PDF
  • Abstract


    In this work the performance analysis of Spoke type Permanent Magnet Synchronous Generator (S-PMSG) also called buried type PMSG is presented for aircraft application. The analytical design of the generator is carried out using design equations and it is verified by RMxprt software. The simulation analysis of the generator is performed by finite element analysis software. The coupled transient electromagnetic field and thermal analysis of the generator is carried out to find the load voltage, load current, cogging torque, heat generation and thermal heat flow. Finally, the overall performance of the analytically designed generator is compared with the simulation results.

     

     


  • Keywords


    Aircraft, Permanent Magnet Synchronous Generator (PMSG), Spoke Type PMSG, Finite element analysis, electromagnetic field and thermal analysis.

  • References


      [1] Deepak Arumugam, Premalatha Logamani and Santha Karuppiah, “Improved Performance of integrated generator system with claw pole alternator for aircraft applications”, Elsevier Energy, http://dx.doi.org/10.1016/j.energy.2017.05.132, pp-808-821, 2017.

      [2] Deepak Arumugam, Premalatha Logamani and Santha Karuppiah, “Design and implementation of claw pole alternator for aircraft application”, Applied Computational Electromagnetic fields Society Journal, Vol. 31, No.5, pp-582-585, 2016.

      [3] Nicolas Patin, Lionel Vido, Eric Monmasson Jean-Paul Louis, Mohamed Gabsi, and Michel Lecrivain, “Control of a hybrid excitation synchronous generator for aircraft applications”, IEEE Transactions on Industrial Application, Vol. 55, No. 10, pp-3772-3782, 2008.

      [4] Themistoklis Kefalas, George Kalokiris , Antonios Kladas and John Tegopoulos, “Design of skewed mounted permanent magnet synchronous generators based on 2D and 3D finite element techniques”, Journal of Materials Processing Technology, pp-288–293, 2005.

      [5] Michael W. Degner, Richard Van Maaren, Azza Fahim, Donald W. Novotny, Robert D. Lorenzand Charles D. Syverson, “A Rotor Lamination Design for SurfacePermanent Magnet Retention at High Speeds” IEEE Transactions On Industry Applications, Vol. 32, No. 2, pp.380-385, 1996.

      [6] Levin N, Orloval S, Pugachovl V, Ose Zala B and Jakobsons E, “ Methods to reduce the cogging torque in Permanent Magnet Synchronous Machines”, Elektronikairelektro technika, Vol. 19, No. 1, pp.1-9, 2013.

      [7] Brahim L. Chikouche, Kamel Boughrara and Rachid Ibtiouen, “Cogging torque minimization of surface mounted Permanent Magnet Synchronous Machines using hybrid magnet shapes”, Progress in electromagnetic fields research , Vol. 62, pp.49-61, 2015.

      [8] Lijunzhou, Yongwei Geng and Zhuoran Zhang, “Comparative study on concentrated winding on permanent magnet synchronous machines with different rotor structures for aircraft generator application”, ICEMS, pp-1246-1250, 2015.

      [9] T. F. Chan, L. L. Lai and L. T. Yan, “Performance of a three-phase AC generator with inset NdFeB permanent-magnet rotor”, IEEE Transaction on Energy Conversion, Vol. 19, No. 1, pp. 88-94, 2004.

      [10] Jere Kolehmainen and JouniIkaheimo, “Motors with Buried Magnets for Medium-Speed Applications”, IEEE Transactions on Energy Conversion, Vol. 23, No. 1, pp.86-91, 2008

      [11] Zhang Tao, Ye Xiaoting, Zhang Huiping and Jia Hongyun, “Strength Design on Permanent Magnet Rotor in High Speed Motor Using Finite Element Method”, Indonesian Journal of Electrical Engineering, Vol.12, No.3, pp. 1758-1763, 2014.

      [12] Tayfun Gundogdu and Guven Komurgoz, “Design of Permanent Magnet Machines with Different Rotor Type”, International Journal of Electrical and Computer Engineering Vol.4, No.10, pp.1510-1515, 2010.

      [13] Bogdan Dumitru Varaticeanu, Paul Minciunescu and Daniel Fodorean, “Mechanical Design and Analysis of a Permanent Magnet Rotors used in High-Speed Synchronous Motor”, Electrotehnica Electronica Automatica, Vol. 62, pp.10-17, 2014.

      [14] Paul.C.Krause, Analysis of Electrical Machinery and drive systems, Wiley Publications, 2nd edition, 2000.

      [15] A.K.Sawhney, Course in Electrical Machine design, Dhanpat Rai& Sons publications, 6th edition, 2006.

      [16] J.R.Hendershot and T.J.E.Miller, Design of brushless Permanent Magnet Machines, Oxford Publication, 1st edition, 1995.


 

View

Download

Article ID: 22025
 
DOI: 10.14419/ijet.v7i4.19.22025




Copyright © 2012-2015 Science Publishing Corporation Inc. All rights reserved.