Power Quality Improvement in Distribution System Using Parallel DSTATCOM

  • Authors

    • Ahmed Mohammed Mohsin Alzubaidi
    • P. V. Ramana Rao
    2018-11-27
    https://doi.org/10.14419/ijet.v7i4.24.21762
  • DSTATCOM is one among FACTS controllers to reduce harmonic effect in power system. Presence of non-linear loads induces harmonics to source components which in-turn affects other sensitive loads. Parallel custom devices share the compensating currents and as a result stress on individual custom device reduces. This paper presents power quality improvement using parallel DSTATCOM in power distribution system. The parallel DSTATCOM are controlled with a common single control scheme using synchronous reference frame theory. Proposed concept was implemented with MATLAB/SIMULINK software and results were discussed considering different loading conditions of the proposed system like balanced case non-linear load and unbalanced case non-linear load conditions.

  • References

    1. [1] V. Khadkikar "Enhancing electric power quality using UPQC: A comprehensive overview" IEEE Trans. Power Electron. vol. 27 no. 5 pp. 2284-2297 2012.

      1. Luo H. Xiao F. Ma et al. "Distribution static compensator based on an improved direct power control strategy" IET Power Electron. vol. 7 no. 4 pp. 957-964 2014.
      2. Kumar M.K. Mishra "An improved hybrid DSTATCOM topology to compensate reactive and nonlinear loads" IEEE Trans. Ind. Electron. vol. 61 no. 12 pp. 6517-6527 2014.

      [2] T. S. Saggu, L. Singh and B. Gill, "Harmonics Mitigation in a Steel Industry Using 11-Level Cascaded Multilevel Inverter-Based DSTATCOM," in Canadian Journal of Electrical and Computer Engineering, vol. 40, no. 2, pp. 110-115, Spring 2017.

      [3] R. Kalpana, S. C. Khimavath, S. P. P and B. Singh, "Power Quality Enhancement Using Current Injection Technique in a Zigzag Configured Autotransformer Based 12-Pulse Rectifier," in IEEE Transactions on Industry Applications, 2018 (early access).

      [4] T. Zaveri B. Bhalja N. Zaveri "Comparison of control strategies for DSTATCOM in three-phase four-wire distribution system for power quality improvement under various source voltage and load conditions" Electr. Power Energy Syst. vol. 43 pp. 582-594 2012.

      A. Patel and A. A. Patel, "Application of DSTATCOM for harmonics elimination and power quality improvement," 2017 International Conference on Energy, Communication, Data Analytics and Soft Computing (ICECDS), Chennai, India, 2017, pp. 3007-3011.

      [5] G. Mallesham and C. S. Kumar, "Enhancement of power quality using UPQC for hybrid PEMFC and DFIG based wind energy system connected to weak grid," 2017 International Conference on Technological Advancements in Power and Energy ( TAP Energy), Kollam, India, 2017, pp. 1-6.

      [6] M. Pradhan and M. K. Mishra, "Dual P-Q Theory based Energy Optimized Dynamic Voltage Restorer for Power Quality Improvement in Distribution System," in IEEE Transactions on Industrial Electronics, 2018 (early access).

      [7] Y. R. Ashtekar, A. A. Mude and S. A. Khubalkar, "Power quality improvement by using modular multilevel cascade converter based STATCOM," 2018 2nd International Conference on Inventive Systems and Control (ICISC), Coimbatore, India, 2018, pp. 169-173.

  • Downloads

  • How to Cite

    Alzubaidi, A. M. M., & Rao, P. V. R. (2018). Power Quality Improvement in Distribution System Using Parallel DSTATCOM. International Journal of Engineering & Technology, 7(4.24), 9-13. https://doi.org/10.14419/ijet.v7i4.24.21762