Design and implementation of power line communication using microcontroller

  • Authors

    • Nagaraju Naddi
    • Ch. Subrahmanyam
    https://doi.org/10.14419/ijet.v7i4.21509
  • Abstract – This paper proposes a novel power line communication system utilizing minimum cables. Conventionally, more number of cables is used to transmit data and power. This leads to increasing the cost, complexity in design and connections, maintenance issues and high man power. In order to avoid these drawbacks, the power line communications system is proposed to transmit the data through the existing power line cables by impressing a modulated carrier signal. The proposed power line communication system is divided into two blocks in design say Transmitter design and Receiver design. At the transmitter side, the data is encoded by using Manchester encoding scheme preceded by Frequency shift keying modulation.Similarly, at the receiver side, the process of demodulation and decoding are used for the retrieval of the original data. In this paper, the STM8 Microcontroller is utilized for the real time validation of the proposed power line communication system design.

  • References

    1. [1] Alperen.Mustafa Colak, IIhan Garip, Sevki Demirbas, “Design and Application of a control system for DC motors over power lineâ€, Power Electronics and Motion Control Conference and Exposition (PEMC) 2014 16th International, pp, 116-1121, 2014.

      [2] Harshad V. Dange, Vamsi K.Gondi “Power Line Communication Based Home Automation and Electricity Distribution Sstem†Published in Process Automation, Control and Computing, 2011 International Conference https://doi.org/10.1109/PACC.2011.5978900.

      [3] K.Atukorala D.Wiekoon M.Tharugasini I.Perera C.Silva “Smart eye Integrated Solution to Home Automation security and monitoring through mobile phones†Next Generation Mobile Applications Services and Technologies 2009. Third International Conference, PP.64-69 Sept.2009.

      [4] X.iang, .Nguimbis, S.Cheng, H. He,and X.Wu, “ A novel scheme for low voltage power line communication signal processingâ€, Int.J.Elect.Power Energy Syst., no.25,pp.269-274,2003.

      [5] M.Zimmermann and K.Dostert, “Analsis and modeling of impulse noise in broadband power line communications†IEEE Trans. Electromagn. Compat, vol.44, no, one, pp.249-258, Feb.2002.

      [6] C.J.Kim and M.F.Chouikha, “Attenuation Characteristic of high rate home networking PLC signal,†IEEE Trans. Power Del., vol. 17, no.4, pp.945-950,oct.2002.https://doi.org/10.1109/TPWRD.2002.803793.

      [7] Bal G.,Daedal N.,†Design and Implementation of Microcontroller Based Temperature Measurement and Control System Using Power Line Communicationâ€, 4th IEEE International Conference on Power Engineering, Energy and Electrical Drivers, Turkey,pp.740-741, 2013.https://doi.org/10.1109/PowerEng.2013.6635848.

  • Downloads

  • How to Cite

    Naddi, N., & Subrahmanyam, C. (2018). Design and implementation of power line communication using microcontroller. International Journal of Engineering & Technology, 7(4), 2899-2902. https://doi.org/10.14419/ijet.v7i4.21509