An Experimental Study on the Performance Evaluation of Resistance Force and Impact-Sound in Reinforced Concrete Bearing-Wall Reinforced with Composite Mortar
Keywords:Composite Mortar, Impact-Sound, Reinforced Concrete, Beraing-Wall, EVA, EPS
The ultimate object of the study is developing new repair and strengthening method in order to reduce floor noise and improve seismic performance which are required at remodeling construction such as apartment house. Strength performance evaluation is conducted through cyclic behavior at the research of reinforced concrete wall applied composite mortar strengthening method with EVA and EPS. Also, research of impact-sound is conducted in the construction site for H apartment which are reinforced the same method. During the research, the strength performance fo the model reinforced EPS composite mortar is 1.19 times increased in comparison with unreinforced model and the model reinforced EVA composite mortar is 1.44 times increased.
 KBC, Structural Concrete Design Code, KBC2012, 2012.
 Korean Industrial Standards, Field measurements of floor impact sound insulation of buildingsï¼Part 1ï¼šMethod using standard light impact sources, KS F 2810-1. 2015.
 Korean Industrial Standards, Field measurements of floor impact sound insulation of buildingsï¼Part 2ï¼šMethod using standard heavy impact sources, KS F 2810-2. 2012.
 Lee R.H., Choi C.S., Oh Y.H, An Experimental Study of Hysteretic Behavior of Reinforced Concrete Shear Walls Subjected to Inelastic Cyclic Loads, Journal of the Architectural Institute of Korea, 1990. 6(6): p.239âˆ¼248.
 Kim T.M., Kim J.T., Kim T.H, Park I.S., Shin D.M., The Study of Floor Impact Noise for Apartment Complex using Statistical Energy Analysis : Coupling Loss Factor, Proceedings of the Korean Society for Noise and Vibration Engineering, 2016. p.116âˆ¼120.
 Joo M.G., Oh Y.G., A study on the sound insulation performance of partition wall between units of apartment house, Journal of the Korea Institute of Ecological Architecture and Environment, 2010. 8(3): p.51âˆ¼56.