Design and Analysis of Crane Hook with Different Cross Sections

  • Authors

    • Trinath Sai Kumar
    • Majeti .
    • Md Riyaz
    • M V.Narayana
    • Murali Pathri
    • Kammuluri. Baburaja
    2018-05-31
    https://doi.org/10.14419/ijet.v7i2.32.15580
  • Crane hook, I- Section, analysis
  • Load is to be transported from one location to other location with the help of heavy vehicles, the load is placed on heavy vehicles with the help of crane or forklifts or conveyer belt, crane hook which bears the entire load. The weight of the load is related to dimensions and material of the hook.  The major part which is to be replaced as per load is crane hook, hook is subjected to pressure and bending stress. In the present work the crane hook of different cross sections is being analyzed on model of crane hook. The crane hook is modeled on the Solidworks and analysis using Ansys. From the structural analysis performed on crane hook the stress values based on the model and stress value modifications are found.

     

     

  • References

    1. [1] Qin, Y. X., et al. "Crane hook stress analysis upon boundary interpolated reproducing kernal particle method." Engineering analysis with boundary elements 63 (2016): 74-81.

      [2] King, C. M., and J. B. Davison. "Development of a proposed design method for discontinuous columns in braced frames." Journal of Constructional Steel Research, 128 (2017): 233-244.

      [3] Lee, Lun-Hui, et al. "Applying vision feedback to crane controller design." International Journal of Systems Science46.2 (2015): 294-302.

      [4] Han, SangHyeok, et al. "An integrated decision support model for selecting the most feasible crane at heavy construction sites." Automation in construction 87 (2018): 188-200.

      [5] Onur, Yusuf Aytaç. "Investigation of the effect of the sling angle and size on the reliability of lifting hooks." Simulation(2017): 0037549717744646.

      [6] Shelke, Surekha S., et al. "Modeling and Analysis of the Crankshaft Using ANSYS Software." International Journal of Engineering Science 6796 (2016).

  • Downloads

  • How to Cite

    Sai Kumar, T., ., M., Riyaz, M., V.Narayana, M., Pathri, M., & Baburaja, K. (2018). Design and Analysis of Crane Hook with Different Cross Sections. International Journal of Engineering & Technology, 7(2.32), 262-263. https://doi.org/10.14419/ijet.v7i2.32.15580