Determination of Building Mortar Mixers Effectiveness

  • Authors

    • Ivan Rohozin
    • Oleksiy Vasyliev
    • Anna Pavelieva
    2018-06-20
    https://doi.org/10.14419/ijet.v7i3.2.14553
  • efficiency, mixing action, compulsory mixer, mixer operating element, construction.
  • The peculiarities of building mortar mixes preparation in cyclic compulsory mixers of various designs have been considered in this article. The work of mixers with a horizontal shaft, a vertical shaft, beaters, screw straps, as well as planetary motion of mixing stars with beaters have been described in detail. The main attention here is paid to the constructive performance of machinery. A relative assessment is given to the manual bearing groups. The multi-purpose system of numerical indices necessary for the performance assessment of mixers’ running efficiency is proposed and defined in this paper. The design of the mixers is considered in this research according to the number of components of the mixture particles motion, which arise from the constrained influence of the movable operating element. The indicators of net weight and area in the plan are attributed to the productivity. The general method of determining the coefficient for assessing the impact, exerted by the design of the mixers on their running efficiency, has also been developed by the authors of this scientific investigation. The obtained data will enable to investigate and improve the design of the mixers, finding the ways to increase their working efficiency.

     

     

  • References

    1. [1] Nazarenko I. I. (1999). Mashyny dlia vyrobnytstva budivelnykh materialiv. K.: KNUBA, 488.

      [2] Ottino J. M. The Kinematics of Mixing: Stretching, Chaos and Transport. (1989). Cambridge University Press, 364.

      [3] Beitzel I. (2003), Assessment and classification of performance mixers, Materials and Structures, 4, 250 – 264. DOI: 10.1007/BF02479619.

      [4] Basinskas G., Sakai M. (2016), Numerical study of the mixing efficiency of a ribbon mixer using the discrete element method, Powder Technology, 287, 380 – 394. DOI: 10.1016/j.powtec.2015.10.017.

      [5] Hanada T., Kuroda K., Takahashi K. (2016), CFD geometrical optimization to improve mixing performance of axial mixer, Chemical Engineering Science, 144, 144 – 152. DOI: 10.1016/j.ces.2016.01.029.

      [6] Korobko B. (2016), Investigation of energy consumption in the course of plastering machine’s work, Eastern-European Journal of Enterprise Technologies, 4/8 (82), 4 – 11. DOI: 10.15587/1729-4061.2016.73336.

      [7] Maslov A. G., Salenko Yu. S. (2006), Issledovanie vzaimodeistviia lopatki betonosmesitelia prinuditelnogo deistviia s tsementobetonnoi smesiu, Visnyk KDPU, 2 (37), 20 – 23.

      [8] Stewart R. L., Bridgwatert J., Zhou Y. C., Yu A. B. (2001), Simulated and measured flow of granules in a bladed mixer – a detailed comparison, Chemical Engineering Science, 56/19, 5457 – 5471. DOI: 10.1016/S0009-2509(01)00190-7.

      [9] Pochupailo B. I. (1999), Issledovanie i sozdanie malogabaritnykh rastvorosmesitelei prinuditelnogo deistviia, Dissertation, 152.

      [10] Cazacliu B., Legrand J. (2008), Characterization of the granular-to-fluid state process during mixing by power evolution in a planetary concrete mixer, Chemical Engineering Science, 63/18, 4617 – 4630. DOI: 10.1016/j.ces.2008.06.001.

      [11] Maslov A. G., Salenko Yu. S. (2009), Issledovanie ratsionalnykh parametrov betonosmesitelia s vertikalnym shnekom, Visnyk KDPU, 1 (54), 81 – 84.

      [12] Korobko B., Vasiliev O., Rogozin I. (2015), The analysis of mixture kinematics in the mixer body frame with a screw elevator with variable generatrix, Eastern-European Journal of Enterprise Technologies, 3/7 (75), 4 – 11. DOI: 10.15587/1729-4061.2015.43053.

      [13] Martynov V. D., Aleshin N. I., Morozov B. P. (1990), Stroitelnye mashiny i montazhnoe oborudovanie. M.: Mashinostroenie, 352.

      [14] Korobko B. (2015), Functional quality characteristics of mixing of mortar t(t) and screw quality K, Energy, energy saving and rational nature use, 1 (4), 115 – 122.

      [15] Bogomolov A. A., Korneev A. S., Rostovtsev A. V. (2007), Model protsessa smeshivaniia s uchetom reologicheskikh cvoistv smesei, Vestnik KhNADU, 38, 90 – 92.

      [16] Korobko B. (2015), Analytical calculations of energy consumption during the solution mixing with the aid of functional characteristics, Studying the nature of matter and physical fields in the search for ways of the fundamental scientific gnoseology problems solution. International academy of science and higher education, London, 51 – 53.

      [17] Gordon S. S. (1978), Povyshenie stepeni gomogenizatsii betonnoi smesi, Beton i zhelezobeton, 2, 21 – 24.

  • Downloads

  • How to Cite

    Rohozin, I., Vasyliev, O., & Pavelieva, A. (2018). Determination of Building Mortar Mixers Effectiveness. International Journal of Engineering & Technology, 7(3.2), 360-366. https://doi.org/10.14419/ijet.v7i3.2.14553