Survey on Efficient Use of Spatial Reusability in Multhop Wireless Network

  • Authors

    • S Murugaveni
    • K Mahalakshmi
    2018-04-25
    https://doi.org/10.14419/ijet.v7i2.24.12129
  • .
  • The present wireless routing protocols does not increase the end-to-end throughput by reducing the number of hops to deliver a single packet from a source to a destination node. To maintain the proper link among the nodes in multihop wireless ad-hoc networks, the medium access control (MAC) protocol plays a vital role. The spatial reuse and throughput of a multihop network is greatly affected in assessing the level of interference, channel sharing was not expeditiously utilized by the prevailing methodology of the IEEE 802.11.Routing protocols are generally depends on transmission cost, minimizing routing metrics. But they fail to give assurance for increasing end-to-end throughput. The existing protocols don't take spatial reusability of the remote correspondence media into account. This paper overviews numerous techniques to upgrade the effective channel use by enhancing the spatial reuse.

  • References

    1. [1] V.Roduplu and T.H.Meng, “Minimum energy mobile wireless networks†IEEE Journal on Selected Areas in Communications Volume 17 Issue 8, September 2006 Page 1333-1344.

      [2] R.Wattenhofer, L.Li, P.Bahl and Y.M.Wang, “Distributed Topology Control for Wireless Multihop Ad-Hoc Networksâ€, in IEEE INF OCOM ‘01,2001.

      [3] N.Li,J.C.Hou, and L.Sha, “Design and analysis of a mst-based distributed topology control algorithm for wireless adhoc networks, “IEEE Trans. Wireless Communication., vol.4, no.3, pp.195-1207, 2005.

      [4] E.Jung and N.H.Vaidya, “A Power Control MAC Protocol for AdHoc Networksâ€, in Proc.ACM International Conference on Mobile Computing and Networking - Mobicom, Atlanta, USA, September 2002, pp. 36-47.

      [5] S.Gobriel, R.Melham and D.Moss, “A Unified Interference/Collision Analysis for Power-Aware Ad Hoc Networksâ€, in Proc. IEEE International Conference on Computer Communications - INFOCOM, Hong Kong, China, March 2004, pp. 608-620 S.

      [6] Agarwal, R.Katz, S.Krishnamurthy, and S.Dao, “Distributed power control in ad-hoc wireless networksâ€, in Proc. IEEE International Symposium on Personal, Indoor and Mobile Radio Communications - PIMRC, San Diego, USA, October 2001,pp.59-66.

      [7] J.Rao and S.Biswas, “Transmission power control for 802.11: a carrier-sense based NAV extension approachâ€, in Proc. IEEE International Global Telecommunications Conference - GLOBECOM, Vol.6, St.Louis, USA, November 2005, pp.6-11

      [8] A.A.Pires, J.F.de Rezende and C.Cordeiro, “ALCA: a new scheme for power control on 802.11 Ad Hoc networksâ€, in Proc. IEEE Internatinal Symposium on a world of Wireless, Mobile and Multimedia Networks - WoWMoM, Taormina - Giardini Naxos, June 2005, pp.475-477.

      [9] J.Zhu, X.Guo, L.L.Yang, and W.S.Conner, “Leveraging spatial reuse in 802.11 mesh networks with enhanced physical carrier sensingâ€, in Proc.IEEE International Conference on Communications - ICC, Paris, France, June 2004, pp.4004-4011.

      [10] [17] X.Yang and N.H.Vaidya, “On the Physical Carrier Sense in Wireless AdHoc Networksâ€, in Proc. IEEE International Conference on Computer Communications - INFOCOM, Miami, USA, March 2005, pp. 2525-2535.

      [11] Y.Zhu, Q.Zhang, Z.Niu and J.Zhu, “On Optimal Physical Carrier Sensing: Theoretical Analysis and Protocol Designâ€, in Proc. IEEE International Conference on Computer Communications - INFOCOM, Alaska, USA, May 2007, pp.2351-2355.

      [12] A.Kamerman and L.Monteban, “WaveLAN II: A high-performance wireless LAN for the unlicnesed bandâ€, Bell Labs Technical Journal,pp. 118-133, summer 1997.

      [13] J.Bicket, “Bit-rate selection in wireless networksâ€, Master’s thesis, MIT, 2005.

      [14] I.Haratcherev, K.Langendoen, R.Lagendijk, and H.Sips, “Hybrid rate control for ieee 802.11â€, in Proc. Second international workshop on Mobility management & Wireless access protocols - MobiWac, Philadelphia, PA, USA, 2004, pp. 10-18.

      [15] M.Lacage, M.Manshaei, and T.Turletti, “IEEE 802.11 rate adaptation: a practical approachâ€, in Proc. ACM International symposium on Modeling analysis and simulation of wireless and mobile systems - MSWiM, Venice, Italyl, 2004. pp. 126-134.

      [16] B.Sadeghi, V.Kanodia, A.Sabharwal and E.Knightly, “Opportunistic media access for multirate ad hoc networksâ€, in Proc. ACM International Conference on Mobile Computing and Networking - Mobicom, Atlanta, Georgia, September 2002, pp.24-35.

      [17] J.Kim, S.Kim, S.Choi and D.Qiao, “CARA “ Collision - Aware Rate Adaptation for IEEE 802.11 WLANs,†in Proc.IEEE International Conference on Computer Communications - INFOCOM, Barcelona, Spain, 2006, pp.1-11.

      [18] J.Choi, J.Na, K.Park, and C.Kim, “Adaptive Optimization of Rate Adaptation Algorithms in Multi-Rate WLANsâ€, in Proc.IEEE International Conference on Network Protocols - ICNP, Beijing, China, October 2007, pp.144-153.

      [19] H.Zhai and Y.Fang, “Physical carrier sensing and spatial reuse in multirate and multihop wireless ad hoc networksâ€, in Proc. IEEE International Conference on Computer Communications - INFOCOm, Barcelona, Spain, April 2006, pp.1-12.

      [20] R.Ramanathan, Antenna Beamforming and Power Control for Ad Hoc Networks.

      [21] F.Baccelli and B.Blaszczyszn, “Stochastic analysis of spatial and opportunistic Alohaâ€, IEEE J.Sel.AreasCommun., vol.27, no.7, pp.1105-1119, Sep.2009,

      [22] Yuchul Kim et al†Spatial Reuse and Fairness of Ad Hoc Networks with Channel-Aware CSMA Protocolsâ€

      [23] Qian Chen et al,†Spatial Reuse Strategy In mmWave WPANs with Directional Antennasâ€, 978-1-4673-0921-9/12@2012 IEEE.

      [24] AlexandreA.Pires, Jose F.de Rezende Independent links: A new approach to increase spatial reuse in wireless networks, Computer Networks 57 (2013) 1880-1893 Elsiever,science direct.

      [25] A.Adya, P.Bahl, J.Padhye, A.Wolman and L.Zhou, A Multi radio unification protocal for IEEE 802.11 wireless networks, in Proc. 1st Int. Conf. Broadband Netw.,2004, pp.344354.

      [26] J.Broch, D.A.Maltz, D.B.Johnson, Y.-C. Hu and J.G.Jetcheva, A performance comparison of multi-hop wireless and hoc network routing protocols, in Proc. 4th Annu. ACM/IEEE Int. Conf. Mobile Comput.Netw., 1998, pp.8597

      [27] S.Chachuluski, M.Jennings, S.Katti and D.Katabi, Trading structure for randomness in wireless opportunistic routing, in Proc. SIGCOMM Conf. Appl., Technol., Archit. Protocols Comput. Commun., 2007, pp.

      [28] D.B.Johnson and D.A.Maltz Dynamic source routing in adhoc wireless networks, Mobile Comput., vol. 353, pp.153181, 1992.

      [29] C.E. Perkins and P.Bhagwat, Highly dynamic destination sequenced distance-vector routing (DSDV) for mobile computers, in Proc. Conf. Commun. Archit., Protocols Appl.,1994, pp.234244.

      [30] R.P.Laufer, H.Dubois-Ferriere and L.Kleinrock, Multirateanypath routing in wireless mesh networks, in Proc. INFOCOM, 2009, pp.3745.

      [31] N.M.Jones, B.Shrader, and E.Modiano, “Optimal routing and scheduling for a simple network coding schemeâ€, in Proc. INFOCOM, 2012, pp. 352-360.

      [32] R.Draves, J.Padhye, and B.Zill, Routing in multi-radio, multihop wireless mesh netowrks, in Proc. 10th Annu. Int. Conf. Mobile Comput.Netw., 2004, pp.114128.

      [33] T.S.Kim, J.C.Hou, and H.Lim, Improving spatial reuse through tuning transmits power, carrier sense threshold, and data rate in multihop wireless networks, in Proc. 12th Annu. Int. Conf. Mobile Comput. Netw.,2006, pp.366377.

      [34] Tong Meng et al†Spatial Reusability-Aware Routing in Multi-Hop Wireless Networks†IEEE transactions on computers, vol.65, no.1, January 2016.

      [35] Ohyun Jo and Jungmin Yoon†Spatial Reuse Algorithm Using Interference Graph in Millimeter wave Beamforming Systemsâ€. ETRI Journal, Volume 39, Number2, April 2017.

      [36] K Mahalakshmi, D.R Prabhakar, D.V Balakrishnan, “Kernel optimization for Improved Non functional requirement classification†Journal of Theoretical and Applied Information Technology 60(1), 64-72.

      [37] K. Mahalakshmi, R Prabhakar “Performance Evaluation for Nonfunctional Requirements†Global Journal of Computer Science and Technology 13 (8).

      [38] K Mahalakshmi, R Prabhakar, V Balakrishnan, “ Optimizing Support Vector machine†for classifying non functional Requirements†Research Journal of Applied Sciences, Engineering and Technology 7 (17).

      [39] K. Mahalakshmi, “Hybrid optimization of SVM for improved Nonfunctional requirement classification†International Journal of Applied Engineering Research 10 (20), 20157-20174.

      [40] K Mahalakshmi, S Manikandan, S Nithyanantham, “ENHANCED SOFTWARE ENGINEERING PROCESS MODEL FOR GREEN ENVIRONMENT IN VIEW OF ACHIEVING SUSTAINABILITY†, International Journal of Advanced Engineering Technology, Vol 7/2 , June 2016, 1072-1079

      [41] K.Shanthakumar, K.Mahalakshmi, R. Keerthika, “AUGMENTED PERSPECTIVE MINING METHODOLOGY FOR CONTROLLED SOCIAL MEDIA†, Pakistan Journal of Biotechnology, 2017/12 , V14, 340-343

      [42] K.Mahalakshmi, “Dynamic Virtual Machines Building Utilizing KBR Agent For Information Security In Hybrid Cloud†, Journal of Advanced Research in Dynamical and Control Systems (JARDCS), 2017/06, 1181 – 1190, Institute of Advanced Scientific Research

      [43] S.V.Manikanthan, Padmapriya.T, “RECENT TRENDS IN M2M COMMUNICATIONS IN 4G NETWORKS AND EVOLUTION TOWARDS 5Gâ€, International Journal of Pure and Applied Mathematics, Vol. 115, No. 8, pp: 623-630, 2017.

      [44] M. Rajesh, Manikanthan, “ANNOYED REALM OUTLOOK TAXONOMY USING TWIN TRANSFER LEARNINGâ€, International Journal of Pure and Applied Mathematics, ISSN NO:1314-3395, Vol-116, No. 21, Oct 2017.

      [45] S.V. Manikanthan , T. Padmapriya “An enhanced distributed evolved node-b architecture in 5G tele-communications network†International Journal of Engineering & Technology (UAE), Vol 7 Issues No (2.8) (2018) 248-254.March2018

  • Downloads

  • How to Cite

    Murugaveni, S., & Mahalakshmi, K. (2018). Survey on Efficient Use of Spatial Reusability in Multhop Wireless Network. International Journal of Engineering & Technology, 7(2.24), 431-435. https://doi.org/10.14419/ijet.v7i2.24.12129