A study on problem diagnosis and maintenance guideline of small scale PV system

  • Authors

    • Hee Chul Kim
    2018-04-03
    https://doi.org/10.14419/ijet.v7i2.12.11102
  • Solar Monitoring System, Guide Line, Build/Operating Model, Profitability Model, Environment Sensors
  • Background/Objectives: Research and development of low-cost, high-efficiency devices that can be installed without replacing existing power generation equipment is promoted early. It is aimed to prevent the damage of property and human life by detecting the fire of PV system. Therefore, it is possible to easily install the device without replacing the solar module The aim is to minimize the damage to people.

    Methods/Statistical analysis: In order to prepare for the safety accidents of the photovoltaic power generation facilities due to fire and blast, the monitoring system should have the following functions as essential. Measures and analyzes the voltage and current of power generated in each string in the connection board in real time. An alarm is triggered when an abnormality of a specific string is detected or when an abnormal temperature change is detected in the connection panel internal temperature sensor.If the smoke sensor inside the connection panel detects smoke generation and an abnormality such as a fire is caught, the monitoring system immediately generates an alarm.

    Findings: It provides services such as checking the status of customer power plants, improving power generation efficiency, and recovering quickly in case of a disaster through a monitoring system that supports stable operation of the PV plant and profit generation. By using the existing connection box function as it is, the company minimized the additional cost, and promoted and promoted a low-cost, high-efficiency system.

    Improvements/Applications: H/W module using temperature and smoke sensor is interlocked with existing connection semi-control system to develop efficient connection monitoring device. In order to link the sensor value with the monitoring system, messages are added and supplemented. For the application of the fail-safe solution, we developed a monitoring device to prevent the escape of the solar module and developed the H / W module using the vibration and loosening sensor. We will develop the solar monitoring system based on cloud type IoT platform by linking the fault recognition and alarm generation function by adding / supplementing the sensor value to link with the monitoring system.As a power station management for cloud type (ASP) service, adoption of oneM2M standard based IoT platform can expand acceptance by monitoring web and mobile based monitoring as well as real time monitoring and fault monitoring of solar power plant.

     


     
  • References

    1. [1] P. Kamat, Y. Zhang, W. Trappe, and C. Ozturk, “Enhancing source-location privacy in sensor networking routing,†In Proc. The 25th Int. Conf. on Distributed Computing Systems, Columbus, OH, Apr. 2005, pp. 1-10. JKIECS, vol. 11, no. 2, 223-228, 2016

      [2] H. Huh and J. Lee, "A Study on Development of H8 MCU IDB(Integrated development board) for Embedded Education," J. of The Korea Institute of Electronic Communication Sciences, vol. 4, no. 1, 2009, pp. 51-57.

      [3] K. Kim, C. Byon, C. Lim, and S. Han, “Design of Electrostatic Monitoring System,†The J. of the korea Institute of Maritime Information & Communication Sciences, vol. 12, no. 11, 2008, pp. 2069-2076.

      [4] D. Lee and W. Lim, “A Development Design Program and Test Module of the Carbon Dioxide Fire Extinguishing System,†Proc. Of the Korea Institute of Fire Science and Engineering Conf., Yongin, Korea, vol. 2012,no. 11, Nov. 2012, pp. 267-270

      [5] H. J. Noh, D. Y. Lee, and D. S. Hyun, “An Improved MPPT Convertor With Current Compensation Method for Small Scaled PV-Applications,†IEEE IES, vol. 2, 2002, pp. 1113-1118.

      [6] S. Ko, “Android Platform Trend,†Communications of the Korea Contents Association review, vol. 8, no. 2, June 2010, pp. 45-49.

      [7] Y. Jian, S. Chen, Z. Zhang, and L. Zhang, “Protecting receiver-location privacy in wireless sensor networks,†In Proc. of 26th Annual IEEE Conf. on Computer Communications IEEE INFOCOM 2007, Anchorage, AK, May 2007, pp. 1955-1963.

      [8] Y. Nam and Y. Lee, “The Ergonomic Study on the Height of the Pillow[Ⅱ],†J. of the Ergonomics Society of Korea, vol. 8. no. 1, 1989, pp. 3-17.

      [9] S. Ye, S. Yang, and H. Ceong, “The Development on Component-based Environment Information Monitoring System,†J. of the Korea Institute of Electronic Communication Sciences, vol. 7, no. 1, 2012, pp. 195-201.

      [10] J. Jung, “Contextualized mobile recommendation service based on interactive social network discovered from mobile users,“Expert Systems with Applications, vol. 36, no. 9, 2009, pp. 11950–11956.

      [11] J. Gene, F. Franklin, J. Powell, and A. Naeini, Feedback Control of Dynamic Systems, Fourth Edition. Brisbane, Australia :Prentice Hall, 2002, pp. 159-165.

      [12] Y. Jung, “Input Ripple Current Formula Analysis of Multi-Stage Interleaved Boost Converter,†J. of the Korea Institute of Electronic Communication Sciences, vol. 6, no. 6, 2011, pp. 865-871.

      [13] K. Mehta, D. Liu, and M. Wright, “Protecting location privacy in sensor networks against a global eavesdropper,†IEEE Trans. Mobile Computing, vol. 11, no. 2, Feb. 2012, pp. 320-336.

      [14] E. Ngai and I. Rodhe, “On providing location privacy for mobile sinks in wireless sensor networks,†Wireless Networks, vol. 19, no. 1, 2013, pp. 115-130.

      [15] H. Kim and Y. Jung, “Reference statements using the fingerprint watermarking Simplify system development,†J. of the Korea Institute of Electronic Communication Sciences, vol. 11, no. 1, 2016, pp. 93-98.

      [16] Pujitha, and J. Alex, “Xively Based Sensing and Monitoring System for IoT,â€Int. Conf. on Computational Collective Intelligence Technologies and Application, China, Beijing Aug., 2015, pp. 1-6.

  • Downloads

  • How to Cite

    Chul Kim, H. (2018). A study on problem diagnosis and maintenance guideline of small scale PV system. International Journal of Engineering & Technology, 7(2.12), 105-16. https://doi.org/10.14419/ijet.v7i2.12.11102