Designand implementation of wearable single chip system for sensing, processing and transmitting human gesture and motion data

  • Authors

    • Venkata Snehith.H
    • Likita Ratna D
    • Syed Shameem
    2018-03-19
    https://doi.org/10.14419/ijet.v7i2.8.10436
  • Flexion-Sensing, Inertial Measurement Unit, Motion-Sensing, Processing, Transmitting.
  • Our work aims at the design of wearable electronic modules that can be assembled as systems for sensing, processing, transmitting, actuating and mimicking human hand gestures and movements, to be used in various robotic, educational, military, medical, industrial, general and hobby applications, the secondary focus of our work is reducing the cost, complexity and assembly of such systems, which are already being used by research centers, laboratories and high-class industries all over the world while the primary objective is to bring these systems down to customizable modular components which could be assembled and combined the way the user wishes to and needs them to be, thereby bringing these concepts closer to a wider range of students, enthusiasts and hobbyists making it easy for them to understand and comprehend these concepts even at the beginner level. In our project, we used commonly available piezo-resistive materials and other household items to make force, pressure, stress, strain and bend sensors and appended them to an Inertial measurement unit, a microcontroller and a wireless transceiver all embedded onto a single chip, to create a simple sensing mechanism that could be worn on a human hand to sense, process and transmit the gestures for actuating and mimicking applications.

  • References

    1. [1] R. M. Edith and A. Bhargava Haripriya, "Gesture recognition using real time EMG," 2015 International Conference on Innovations in Information, Embedded and Communication Systems (ICIIECS), Coimbatore, 2015, pp. 1-3.

      [2] C. Maj and A. Napieralski, "Mechanical simulation of 3-axis accelerometer using a single proof-mass," 2017 XIIIth International Conference on Perspective Technologies and Methods in MEMS Design (MEMSTECH), Lviv, 2017, pp. 47-50.

      [3] H. Takahashi, S. Hirakawa, T. Takahata, K. Matsumoto and I. Shimoyama, "Quad-axial piezoresistive force sensor probe by four sensing elements with sidewall doping method," 2015 Transducers - 2015 18th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS), Anchorage, AK, 2015, pp. 1089-1092.

      [4] F. Tounsi, E. Ayechi, B. Mezghani, M. Masmoudi, M. Kandpal and V. R. Rao, "Behavior analysis of a 3-axis detection push-pull piezoresistive MEMS accelerometer," 2015 IEEE 12th International Multi-Conference on Systems, Signals & Devices (SSD15), Mahdia, 2015, pp. 1-6.

      [5] A. Walther et al., "3-Axis gyroscope with Si nanogage piezo-resistive detection," 2012 IEEE 25th International Conference on Micro Electro Mechanical Systems (MEMS), Paris, 2012, pp. 480-483.doi: 10.1109/MEMSYS.2012.6170228.

      [6] Dr. Seetaiah Kilaru, Hari Kishore K, Sravani T, Anvesh Chowdary L, Balaji T “Review and Analysis of Promising Technologies with Respect to fifth Generation Networksâ€, 2014 First International Conference on Networks & Soft Computing, ISSN:978-1-4799-3486-7/14,pp.270-273,August2014.

      [7] Meka Bharadwaj, Hari Kishore "Enhanced Launch-Off-Capture Testing Using BIST Designs†Journal of Engineering and Applied Sciences, ISSN No: 1816-949X, Vol No.12, Issue No.3, page: 636-643, April 2017.

      [8] P Bala Gopal, K Hari Kishore, R.R Kalyan Venkatesh, P Harinath Mandalapu“An FPGA Implementation of On Chip UART Testing with BIST Techniquesâ€, International Journal of Applied Engineering Research, ISSN 0973-4562, Volume 10, Number 14 , pp. 34047-34051, August 2015

      [9] A Murali, K Hari Kishore, D Venkat Reddy "Integrating FPGAs with Trigger Circuitry Core System Insertions for Observability in Debugging Process†Journal of Engineering and Applied Sciences, ISSN No: 1816-949X, Vol No.11, Issue No.12, page: 2643-2650, December 2016.

      [10] Mahesh Mudavath, K Hari Kishore, D Venkat Reddy "Design of CMOS RF Front-End of Low Noise Amplifier for LTE System Applications Integrating FPGAs†Asian Journal of Information Technology, ISSN No: 1682-3915, Vol No.15, Issue No.20, page: 4040-4047, December 2016.

      [11] N Bala Dastagiri, Kakarla Hari Kishore "Reduction of Kickback Noise in Latched Comparators for Cardiac IMDs†Indian Journal of Science and Technology, ISSN No: 0974-6846, Vol No.9, Issue No.43, Page: 1-6, November 2016.

      [12] S Nazeer Hussain, K Hari Kishore "Computational Optimization of Placement and Routing using Genetic Algorithm†Indian Journal of Science and Technology, ISSN No: 0974-6846, Vol No.9, Issue No.47, page: 1-4, December 2016.

      [13] Meka Bharadwaj, Hari Kishore "Enhanced Launch-Off-Capture Testing Using BIST Designs†Journal of Engineering and Applied Sciences, ISSN No: 1816-949X, Vol No.12, Issue No.3, page: 636-643, April 2017.

      [14] N Bala Dastagiri,, K Hari Kishore "Analysis of Low Power Low Kickback Noise in Dynamic Comparators in Pacemakers†Indian Journal of Science and Technology, ISSN No: 0974-6846, Vol No.9, Issue No.44, page: 1-4, November 2016.

      [15] S.V.Manikanthan and T.Padmapriya “Recent Trends In M2m Communications In 4g Networks And Evolution Towards 5gâ€, International Journal of Pure and Applied Mathematics, ISSN NO:1314-3395, Vol-115, Issue -8, Sep 2017.

      [16] T. Padmapriya and V.Saminadan, “Improving Performance of Downlink LTE-Advanced Networks Using Advanced Networks Using Advanced feedback Mechanisms and SINR Modelâ€, International Conference on Emerging Technology (ICET), vol.7, no.1, pp: 93, March 2014.

      [17] Meka Bharadwaj, Hari Kishore "Enhanced Launch-Off-Capture Testing Using BIST Designs†Journal of Engineering and Applied Sciences, ISSN No: 1816-949X, Vol No.12, Issue No.3, page: 636-643, April 2017.

  • Downloads

  • How to Cite

    Snehith.H, V., Ratna D, L., & Shameem, S. (2018). Designand implementation of wearable single chip system for sensing, processing and transmitting human gesture and motion data. International Journal of Engineering & Technology, 7(2.8), 335-339. https://doi.org/10.14419/ijet.v7i2.8.10436