Design of SCADA based solar power plant for clean water irrigation system in remote areas
About this article
DOI:
https://doi.org/10.14419/ijet.v7i4.36.28977Keywords:
SCADA architecture, MS, RTU, Communication lines, Solar power plantAbstract
The study aimed to design a supervisory control and data acquisition (SCADA) system to control solar power plants for clean water irri-gation system during the dry season in remote areas. The SCADA system contrived is expected to be able to meet the main elements of the SCADA architecture. Accordingly, following steps were conducted, starting from designing the human machine interface (HMI) in the master station (MS), mapping out the microcontroller as a remote terminal unit (RTU) and designing the communication path be-tween MS and RTU. Furthermore, the SCADA system was tested by the system test to evaluate the SCADA system that was designed meet minimum standard and running well. After tested, the result showed that the system is successfully designed to meet the main ele-ments of SCADA architecture. The system is also able to monitor and control remotely, resulting in more efficient control of user work as well as rapid decision making in order to minimize damage potential when an interruption occurs. For both control and monitor, the MS and RTU in the SCADA system wirelessly communicate.
References
D. Delimustafic, J. Islambegovic, A. Aksamovic, and S. Masic,
“Model of a hybrid renewable energy system: Control, supervision
and energy distribution,” in 2011 IEEE International Symposium
on Industrial Electronics, 2011, pp. 1081–1086.
A. Tsagaris and D. G. Triantafyllidis, “Data monitoring system for
View more references (46)
supervising the performance assessment of a photovoltaic park,” in
CINTI 2012 - 13th IEEE International Symposium on
Computational Intelligence and Informatics, Proceedings, 2012, pp.
–389.
S. Tiwari and R. N. Patel, “Real Time Monitoring of Solar Power
Plant and Automatic Load Control,” in Engineering and Systems
(SCES), 2015 IEEE Students Conference on, 2015, pp. 1–6.
P. Guerriero, F. Di Napoli, G. Vallone, V. Dalessandro, and S.
Daliento, “Monitoring and diagnostics of PV plants by a wireless
self-powered sensor for individual panels,” in IEEE Journal of
Photovoltaics, 2016, vol. 6, no. 1, pp. 286–294.
P. Guerriero, G. Vallone, M. Primato, F. Di Napoli, L. Di Nardo, V.
D’Alessandro, and S. Daliento, “A wireless sensor network for the
monitoring of large PV plants,” in 2014 International Symposium
on Power Electronics, Electrical Drives, Automation and Motion,
, pp. 960–965.
G. Bayrak, M. Cebeci, and x, “Monitoring a grid connected PV
power generation system with labview,” in IEEE Renewable
Energy Research and Applications (ICRERA), 2013 International
Conference on, 2013, no. October, pp. 562–567.
C. I. Chow and J. Mungkornassawakul, “A smart recording power
analyzer prototype Using LabVIEW and low-cost data acquisition
(DAQ) in being a smart renewable monitoring system,” in IEEE Green Technologies Conference, 2013, pp. 49–56.
C. Lin, G. Jie, Z. Wu, and W. Rui, “Design of networked
monitoring system of PV grid-connected power plant,” in
Proceedings of 2011 International Conference on Electronic and
Mechanical Engineering and Information Technology, EMEIT
, 2011, vol. 3, pp. 1169–1172.
A. Soetedjo, Y. I. Nakhoda, and D. Suryadi, “Development of data
acquisition system for hybrid power plant,” in 2013 13th
International Conference on Quality in Research, QiR 2013 - In
Conjunction with the 2nd International Conference on Civic Space,
ICCS 2013, 2013, pp. 197–201.
E. Duque, A. Isaza, P. Ortiz, S. Chica, A. Lujan, and J. Molina,
“Urban Sets Innovation: design of a solar tree PV system for
charging mobile devices in medellin - Colombia,” in 6th
International Conference on Renewable Energy Research and
Applications, 2017, pp. 495–498.
I. Abubakar, S. N. Khalid, M. W. Mustafa, H. Shareef, and M.
Mustapha, “Calibration of ZMPT101B voltage sensor module using
polynomial regression for accurate load monitoring,” in ARPN
Journal of Engineering and Applied Sciences, 2017, vol. 12, no. 4,
pp. 1076–1084.
Allegro, “ACS712 Fully Integrated, Hall Effect-Based Linear
Current Sensor with 2.1 kVRMS Voltage Isolation and a Low-
Resistance Current Conductor,” 2007, Rev. 7., pp. 1–14.