Estimating the Motion of Shock and Vibration System and Performance of Oscillation Limiters Based on Time and Shape of Shock Pulse of the Shock and Vibration Machine
About this article
DOI:
https://doi.org/10.14419/ijet.v7i4.8.27257Keywords:
concrete mix compaction, equation of motion, impact pulse, oscillation limiters, shock and vibration machine.Abstract
The paper describes an analytic dependence for determining the amplitude of oscillations on a fundamental frequency with the definition of the limit on the amplitude of the super resonance harmonic. In the article the conditions are formulated and dependences for a system moving in shock and up to shock mode: time of impact, deformation of limiters, recovery factor, velocity after the end of interaction are defined.
References
AG Maslov, Vibratsionnyye mashiny dlya prigotovleniya i uplot-neniya betonnykh smesey : monografiya, AG Maslov, AF Itkin, YUS Salenko; Minesterstvo obrazovaniya i nauki Ukrainy, Kremen-chugskiy nats. universitett imeni Mikhaila Ostrogradskogo. Kre-menchuk: PP Shcherbatykh O.V. -2014. -324 s. ISBN 978-617-639-056-5.
II Nazarenko, Vibratsiyni mashyny i protsesy budivelnoyi industriyi, KNUBA, Kyiv, 2007, 230s. ISBN 978-966-627-134-7.
Alla Dmitrenko, Galyna Lebedyk, Mykola Nesterenko. Product cost calculation methods in construction, International Journal of Engineering & Technology (UAE), Vol 7, № 3.2 (2018). – P. 6 – 11. Published on: 20-06-2018. https://doi.org/10.14419/ijet. v7i3.2.14367
Mykola Nesterenko, Tetyana Nesterenko, Taras Skliarenko. Theo-retical studies of stresses in a layer of a light-concrete mixture, which is compacted on the shock-vibration machine, International Journal of Engineering & Technology (UAE), Vol 7, № 3.2 (2018). – P. 419 – 424. Published on: 20-06-2018. https://doi.org/10.14419/ ijet.v7i3.2.14564
II Blekhman, Vibratsionnaya mekhanika, Fizmatlit, Moskva, 1994, 400 s.
View more references (15)
Nazarenko II, Ruchynskyy MM, Terenchuk SA, “Doslidzhennya rezhymnykh ta enerhetychnykh kharakterystyk prohresyvnykh vi-bromashyn”, Visnyk NTUU «KPI», Vol. 63, (2011), ss.214-218. https://doi.org/10.20535/2305-9001.2011.63.58587.
Nazarenko II, Sviderskyy АТ, Dyedov ОР, “Stvorennya vysokoefektyvnykh vibroushchilnyuyuchykh mashyn novoho pokolinnya”, Visnyk NTUU «KPI», Vol. 63, (2011), ss.219-223. https://doi.org/10.20535/2305-9001.2011.63.58753.
AH Maslov, Zhanar Bat·saykhan, “Opredelenye ratsyonalnykh par-ametrov vybroudarnoho rabocheho orhana dlya uplotnenyya bet-onnykh smesey”, Visnyk Kremenchutskoho natsionalnoho univer-sytetu imeni Mykhayla Ostrohradskoho, Vol. 4 (93), Chast. 1, (2015), ss. 58-64.
Mykola Nesterenko, Ivan Nazarenko, Petro Molchanov. Cassette installation with active working body in the separating partition, In-ternational Journal of Engineering & Technology (UAE), Vol 7, № 3.2 (2018). – P. 265 – 268. Published on: 20-06-2018. https://doi.org/10.14419/ijet.v7i3.2.14417
Orysenko OV, Nesterenko MM, “Konstruktsiya udarno-vstryakhivayushchey ustanovki dlya formovaniya stenovykh blokov iz legkikh betonov na osnove analiza konstruktivnykh osobennostey uplotnyayushchikh mashin”, Materialy Mezhdunarodnoy nauchno-prakticheskoy konferentsii 2010g. G. Volgograd, Vol.1, (2011), ss. 227-233.
Orysenko OV, Nesterenko MM, “Rozroblennya konstruktsiyi udar-no-strushuvalnoyi ustanovky dlya formuvannya stinovykh blokiv iz lehkykh betoniv na osnovi analizu konstruktyvnykh osoblyvostey ushchilnyuyuchykh mashyn”, Zbirnyk naukovykh prats: haluzeve mashynobuduvannya, budivnytstvo, Vol. 3(25), (2009), ss. 150-155.
Orysenko OV, Nesterenko MM, “Udarno-strushuvalna ustanovka dlya formuvannya stinovykh arbolitovykh blokiv iz lehkykh betoniv iz zastosuvannyam mineralnykh vyazhuchykh”, Zbirnyk naukovykh prats: haluzeve mashynobuduvannya, budivnytstvo, Vol. 23, (2009), ss. 63-68.
II Nazarenko, Prykladni zadachi teoriyi vibratsiynykh system, Vydavnychyy Dim «Slovo», Kyiv, 2010, 440s.
Maslov AG, Zhanar Batsaykhan. Issledovaniye kolebaniy rabochego organa mashiny dlya uplotneniya betonnykh smesey v vibratsionnom rabochem rezhime//Visnik Kremenchuts'kogo natsional'nogo uni-versitetu imeni Mikhayla Ostrograds'kogo. -Kremenchuk: KrNU. -2015. -Vip. 2 (91). Chast. 1. -S. 92-97.
Korobko, B. (2016). Investigation of energy consumption in the course of plastering machine's work. EasternEuropean Journal of Enterprise Technologies, 4(8-82), 4-11. https://doi.org/10.15587/1729-4061.2016.73336
Nesterenko, M., Maslov, A., & Salenko, J. (2018). Investigation of vibration machine interaction with compacted concrete mixture. In-ternational Journal of Engineering and Technology (UAE), 7(3), 260-264. https://doi.org/10.14419/ijet.v7i3.2.14416
Nesterenko, M., Nazarenko, I., & Molchanov, P. (2018). Cassette installation with active working body in the separating partition. In-ternational Journal of Engineering and Technology (UAE), 7(3), 265–268. https://doi.org/10.14419/ijet.v7i3.2.14417
Korobko, B., Zadvorkin, D., & Vasyliev, I. (2017). Study of the operating element motion law for a hydraulic-driven diaphragm mortar pump. EasternEuropean Journal of Enterprise Technolo-gies, 4(7-88), 25-31. https://doi.org/10.15587/1729-4061.2017.106873
Korobko, B., Vasiliev, A., & Rogozin, I. (2015). The analysis of mixture kinematics in the mixer body frame with a screw elevator with variable generatrix. EasternEuropean Journal of Enterprise Technologies, 3(7), 48-52. https://doi.org/10.15587/1729-4061.2015.43053 48-52
Pichugin, S., Patenko, I., & Maslova, S. (2018). Comparative analy-sis of loads from the travelling cranes of different produc-ers. International Journal of Engineering and Technolo-gy(UAE), 7(3), 36-39. https://doi.org/10.14419/ijet.v7i3.2.14372