Productivity Enhancement by Implementing Automatic Burr Cleaning Machine in Lathes

  • Authors

    • Vishnu. R
    • Raagav. R
    • Karthik R
    • Thamaraiselvan. A
    • Palani. S
    https://doi.org/10.14419/ijet.v7i4.10.21037

    Received date: October 5, 2018

    Accepted date: October 5, 2018

    Published date: October 2, 2018

  • automation, breakdown maintenance, kaizens, productivity enhancement

  • Abstract

    In the era of modernization and complete automation, industries employ manual cleaning operation which is highly time-consuming and man power requirements are high. To overcome this situation an automatic cleaning machine which can be employed to overcome the above stated obstacles by means of a completely automated cleaning system universally for different categories of machines based on the duties and classes of performance respectively.

    The main objective of this project is to develop a universal cleaning system which is used to completely clean the wastes which falls in between the machinery and at its collection spots such as hoppers, beds, plates, floors etc., where it cleans in all places where human hands cannot reach and cleaning operation considered not possible. The major advantage of machines are that they much more precise in doing the work than considered to a human or manual labor

  • References

    1. A. Garg, V.Vijayraghvan, K. Tai, Pravin M. Singru, Vishal Jain, Nikilesh Krishnakumar, Model development based on evolutionary framework for condition monitoring of a lathe machine,vol-8,pages 95-110,2015.
    2. Danilo de Jesus Oliveria and et al., improving minimum quality lu-brication in CBN grinding using compressed air wheel cleaning journal of material processing technology 212, 2559-2568, 2012.
    3. C.Aurich and et al., Burrs-Analysis, control and removal, CIRP Annals-Manufacturing technology 58, 519-542, 2009.
    4. Zhaojun Kou and et al., Burr controlling in micro milling with sup-porting Material method, Procedia manufacturing, vol-1, pages 501-511, 2015.
    5. Niels deHoop, Joseph G. Massey and Chuck McKinney, A ply-wood veneer lathe maintenance expert system- development and implementation, Computers and electronics in agriculture, Vol-7, 23-33, 1992.
    6. B.C. Kwon, K.H. Kim, K.H. Kim, S.L. Ko, New abrasive debur-ring method using suction for micro burrs at intersecting holes, CIRP Annals- Manufacturing technology 65, 145-148, 2016.
    7. Chih-Hsing Chu and David Dornfield, Tool path planning for avoiding exit burrs, Journal of manufacturing process, vol-2, No.2, 2010.
    8. Sergey F. Golovashchenko, A study on trimming of aluminum au-tobody sheet and development of a new robust process eliminating burrs and slivers International journal of mechanical sciences 48, 1384-1400, 2006.
    9. Kiran M, Cijo Mathew, Jacob Kuraiakose, Root cause analysis for reducing breakdowns in a manufacturing industry, UETAE, vol-3, issue 1, 2013.
    10. Nicoleta Isac, Principles of TQM in automotive industry, Romanian Economic and Business review-vol5,No. 4, 2004.
    11. Chih-Hsing Chu, David Dornfield, Geometric approaches for re-ducing burr formation in planar milling by tool exits, journal of manufacturing process vol2, No.2, 2005.
    12. Vladimir Jesus Trava-Airoldi & et al., Hot filament scaling up for CVD diamond burr manufacturing, surface and coatings technology 77, 797-802, 1995

  • Downloads

  • How to Cite

    R, V., R, R., R, K., A, T., & S, P. (2018). Productivity Enhancement by Implementing Automatic Burr Cleaning Machine in Lathes. International Journal of Engineering and Technology, 7(4.10), 443-447. https://doi.org/10.14419/ijet.v7i4.10.21037