Design of Fixture for Rotor Post

  • Authors

    • R Anbazhagan
    • R Kalidoss
    • R Suresh
    • S Refugene James Dev
    • Srikanth S
    • Yeshwanth Raj M.G
    https://doi.org/10.14419/ijet.v7i3.34.19226

    Received date: September 7, 2018

    Accepted date: September 7, 2018

    Published date: September 1, 2018

  • Rotor post, Fixture plate, Leveled bed.

  • Abstract

    This paper deals with Design of Fixture for Rotor Post. The existing method is studied regarding the assembly of the rotor post using the normal marking. So, it is to suggest a design for the fixture for rotor post. It includes fixture plate design with leveled bed. The leveled bed is placed on the locator, providing the dimensioned fixture plate fixed on the leveled bed. The fixture plates are designed according to the size of the rotor post. The rotor post is placed on the leveled bed, the verticality of rotor post as in assembly is maintained. The committee has also interacted with shop executives about the work with additional safety also. This paper helps to improve the accuracy and increase the productivity of the rotor post. It also reduces the total time of the fabrication. Due to this work, the fabrication cost of the rotor post reduced.

  • References

    1. Abhishek Das, Pasquale Franciosa and Darek Ceglarek (2015) “Fixture Design Optimization Considering Production Batch of Compliant Non-Ideal Sheet Metal Parts”- Procedia Manufacturing volume 1, 157–168
    2. Ashish T.Patil, S.M.Pise, S.G.Bhatwadekar, S.B.Sangale (2015) “Various Flexible Fixturing Systems in Manufacturing”- International Journal of Innovative Research in Science, Engineering and Technology (An ISO 3297: 2007 Certified Organization) Vol. 4, Issue 9.
    3. Cai Hua Xionga, You-Fu Lib, Y. Kevin Rongc, You Lun Xionga (2014) “Qualitative analysis and quantitative evaluation of fixturing”- Robotics and Computer Integrated Manufacturing, 18,335–342.
    4. Chetankumar M. Patel, Dr.G.D.Acharya (2014) “Design and manufacturing of 8 cylinder hydraulic fixture for boring yoke on VMC – 1050”-www.sciencedirect.com/Procedia Technology, 14, 405 – 412.
    5. Diana M. Pelinescu, Michael Yu Wang (2015) “Multi-objective optimal fixture layout design”- Robotics and Computer Integrated Manufacturing, 18,365–372
    6. S.A.Galehdari, M. Kadkhodayan, S. Hadidi-Moud (2015) “Analytical, experimental and numerical study of a graded honeycomb structure under in-plane impact load with low velocity”-http://shura.shu.ac.uk/information.html.
    7. Hans-Christian Möhringa, Petra Wiederkehrb (2016) “Intelligent Fixtures for High Performance Machining” www.sciencedirect.com.Procedia CIRP, 46, 383 – 390.
    8. Hui Wanga,Yiming (Kevin) Rong,Hua Li , Price Shaun (2015) “Computer aided fixture design: Recent research and trends”- www.elsevier.com/locate/cad Computer-Aided Design, 42, 1085–1094.
    9. N. P. Maniar, D. P. Vakharia (2016) “Design & Development of Fixture for CNC”- International Journal of Scientific & Engineering Research Volume 4, Issue 2, ISSN 2229-5518.
    10. Novkinic B, Buchmeister B, Radenkovic M (2016) “Fixture layout design based on a single-surface clamping with local deformation”- Int j sumul model, 14 (3), 379-391, ISSN 1726-4529.
    11. Oleg Mihaylov, Galina Nikolcheva (2017) “An integrated RBR fixture design system”- cbu international conference on innovations in science and education march 22-24, Prague, Czech Republic.
    12. D Suthar, K.M .Patel, and Sanjay G Luhana (2015), Design and analysis of fixture for welding an exhaust impeller Jigar”- www.sciencedirect.com/Procedia Engineering, 51, 514 – 519.
    13. Todorovic P, Vukelic D, Tadic B (2015) “Modeling of dynamic compliance of fixture/workpiece interface”- Int j simul model, 13, 1, 54-65, ISSN 1726-4529.
    14. B Vijaya Ramnath, C.Elanchezhian, S.Rajesh, S.Jaya Prakash, B. Manoj Kumaar, K. Rajeshkannan(2016) “Design and Development of Milling Fixture for Friction Stir Welding”- Materials Today: Proceedings, 5,1832–1838.
    15. Yunbo Zhou, Yingguang Li, WeiWang (2016) “A feature-based fixture design methodology for the manufacturing of aircraft structural parts”- www.elsevier.com/locate/rcim/Robotics and Computer-IntegratedManufacturing, 27, 986–993
    16. Yu Zheng, Chee Meng Chew (2016),“A geometric approach to automated fixture layout design”- www.elsevier.com/locate/cad/Computer-Aided Design 42, 202-212.

  • Downloads

  • How to Cite

    Anbazhagan, R., Kalidoss, R., Suresh, R., Refugene James Dev, S., S, S., & Raj M.G, Y. (2018). Design of Fixture for Rotor Post. International Journal of Engineering and Technology, 7(3.34), 362-365. https://doi.org/10.14419/ijet.v7i3.34.19226