Skip to content
IJET International Journal of Engineering and Technology E-ISSN 2227-524X

Comparative Design and Analysis of Helical and Wave Spring

Abstract

This paper is a comparative between two springs such as helical and wave spring. Wave springs are precise flat wire compression springs that fit into assemblies that other springs cannot. These are used as an alternative spring for helical spring. Wave springs provide 50% reduction in spring height and axial space. They possess the same force and deflection as coil springs. They have reduced material requirements. They provide improved cost reduction. The Wave Spring has been subjected to Compression Test, Modal Analysis and Equivalent Elastic Strain Test and then compared to Helical Spring which again was subjected to the above same tests under the same conditions and parameters. The design of helical spring and wave spring has been done in CREO Parametric 4.0 and analysed in ANSYS R 18.1. The results are then compared.

Authors and Affiliations

  • M Muralidharan
  • R Aravinth
  • J Gafferkhan
  • R Gandhi

About this article

Download PDF

Keywords

  • Spring comparison
  • Designing
  • Analyzing stress
  • strain concepts.

References

[1] Prof. Dhruv Joshi, Santosh Srivastava S., Bhautik Patel R., Mehul Gohil M , “Analysis of Wave Spring and Compared with Coiled Spring for Same Parameter”, IJARIIE-ISSN(O)-2395-4396, Vol-3 Issue-2, (2017).

[2] Dr P. Ravinder Reddy, V. Mukesh Reddy, “Determination of Buckling Loads of Wave Spring Using Ansys”. Volume 3 Issue 8, (August. 2015),PP.48-56.

[3] Pinjarla. Poornamohan, Lakshmana Kishore. (2014) T. “Design and Analysis of a shock Absorber”. International Journal of Research in Engineering and Technology, Volume: 01 Issue: 04, (Dec-2012) 2319-1163.

[4] Siddhant. R. Patil, Priyanka P. Gangurde. “Comparative Study of Wave Spring and Coil Spring Using Ansys”. Journal of Computer Aided Manufacturing and Automation, Volume 2 Issue 3, (2017).

[5] P.N.L. Pavania, B.K.Prafullab, R.Polaraoc, S.Srikirand. “Modeling and Structural Analysis of wave Springs”. Procedia Materials Science6, (2014), 988 – 995.

[6] Mr.Siddhant R.Patil, Prof.Poonams.Talmale, Kct’s Lat G.N. Sapkal C.O.E. Nashik. “A Comparative Study of wave and Coil Spring Using Fem Approach”. International Engineering Research Journal, (2016), Page No 762-767.

[7] Akshat Jain, Arun Jindal, Prateek Lakhiani, Sheelam Mishra. “Mathematical Approach to Helical and Wave Spring Used in Suspension System”. International Journal of Mechanical and Production Engineering, ISSN: 2320-2092, Volume- 5, Issue-6, (Jun.-2017).

[8] Kalpesh Tank, Kishan Patel, Punit Sanghavi. “Material Optimization of Automotive Shock Absorbers”. International Journal of Innovative Research in Science, Engineering and Technology. Vol. 5, Issue 12, December 2016.

[9] Johnson, Davis Jose, Anthony Tony. “Design and Analysis of a Shock Absorber”. International Journal of Scientific & Engineering Research, Volume 7, Issue 3, March-2016.

[10] Prince Jerome Christopher J, Pavendhan R (2016). “Design and Analysis of Two-Wheeler Shock Absorber Coil Spring”, International Conference on Advances in Engineering and Management


How to Cite

Muralidharan, M., Aravinth, R., Gafferkhan, J., & Gandhi, R. (2018). Comparative Design and Analysis of Helical and Wave Spring. International Journal of Engineering and Technology, 7(3.34), 353-356. https://doi.org/10.14419/ijet.v7i3.34.19224