Design and Development of an LNB based DVB-S receiver
About this article
Keywords:
LNB, STB, PID, DVB, LLR, QPSK, MPEG.Abstract
 This paper introduces an LNB-based DVB-S receiver with respect to sync byte detection. The basic configuration of DVB-S for decoding is the major focus of this work, where the main task is to decode the received signal from the satellite with a good SNR. Sync-byte detection is one of the challenges of receiver design. An algorithm is developed to overcome the problems associated with Sync-byte detection which can efficiently perform Sync-byte detection. After decoding the signal, the SNR is found to be 9.62 dB, which represents quiet a good signal. A channel list is identified in the final result.
Â
Â
References
[1] E. ETSI, “300 421, digital video broadcasting (dvb); framing structure, channel coding and modulation for 11/12ghz satellite services v1. 1.2 (1997-08)â€, european telecommunications standards institute, 1997 itu-r rec,†Specific Attenuation Model for Rain for Use in Prediction Methods, pp. 838–3, 2005.
[2] U. Reimers, DVB: the family of international standards for digital video broadcasting. Springer, 2013. Pp. 173-182.
[3] M. Cominetti and A. Morello, “Digital video broadcasting over satellite (dvb-s): a system for broadcasting and contribution applications,†International journal of satellite communications, vol. 18, no. 6, pp. 393–410, 2000.
[4] https://www.ses.com/01-jan-1986/1986-building-satellite
[5] http://www.satindex.de, “Astra,†satellite update. [Online]. Available: http://www.satindex.de/frequenz/10744/
[6] M. 6.02, “Viterbi decoding of convolutional codes,†in MIT Lecture.MIT,2010.
[7] U. N. Reimers, “The european perspectives on digital television broadcasting,†EBU V4/MOD 249, 1993.