Design and development of C3 protocol for performance measurement of wireless sensor network

  • Authors

    • Kasturi S. Patil
    https://doi.org/10.14419/ijet.v7i2.31.13398

    Received date: May 28, 2018

    Accepted date: May 28, 2018

    Published date: May 29, 2018

  • Wireless Sensor Network, C3, Connectivity, Coverage, Communication, Routing

  • Abstract

    In twenty-first century, technology changes tremendously. A wireless sensor network is bunch of sundry sensor nodes where, nodes are distributed arbitrarily. Sensor consumes most of its energy in data transmission and reception. System ascertained different amended protocols for performance quantification of WSN. Sensing node sense environment but doesn’t transmit or receive the data. Slumber nodes neither sense environment nor transmit or receive data. Proposed system validate the analytical models utilizing extensive simulations incorporating experimental results on the substratum of different parameter here performance is checked. A protocol for communication and connectivity in Wireless Sensor Network is proposed. This ascertains coverage, connectivity and energy-efficient communication. It contains steps such as: Declaration of deployment area, cull of nodes, connectivity of nodes, and communication between all nodes.

  • References

    1. Li B, Li H, Wang W, Yin Q & Liu H, “Performance analysis and optimization for energy efficient cooperative transmission in random wireless sensor network”, IEEE Trans. Wirel. Commun., Vol.12, No.9, (2013), pp.4647–4657
    2. Kansanen K & Ekman T, “Performance Analysis of Energy Detection for MIMO Decision Fusion in Wireless Sensor networks Over Arbitrary Fading Channels”, IEEE Transactions on Wireless Communications, Vol.15, No.11, (2016), pp.7794–7806.
    3. Cerpa A & Estrin D, “ASCENT: Adaptative Self-ConfiguringSensor Networks Topologies”, Proc. IEEE INFOCOM, Vol.3, No.3, (2001), pp.1–14.
    4. Brar GS, Rani S, Chopra V, Malhotra R, Song H, and Ahmed SH, “Energy Efficient Direction Based PDORP Routing Protocol For Wireless Sensor Networks”, IEEE Access, (2016).
    5. Karthi JS, Rao SV & Pillai SS, “Performance analysis ofwireless sensor networks with IEEE 802.15. 4 MAC based on variation in packet size”, Int. Conf. Control.Instrumentation, Commun. Comput. Technol., (2015), pp.46–50.
    6. Chen B, Jamieson K, Balakrishnan H & Morris R, “Span: An Energy-Efficient Coordination Algorithms for Topology Maintenance in Ad Hoc Wireless Networks”, Wirel. Networks, Vol.8, No.5, (2002), pp.481–494.
    7. Sain M, Bruce N, Kim KH & Lee HJ, “communication security protocol for ubiquitous sensor networks”, Int. Conf.Adv. Commun. Technol. ICACT, (2017), pp.228–231.
    8. Aziz A, Şekercioǧlu YA, Fitzpatrick P & Ivanovich M, “A survey on distributed topology control techniques for extending the lifetime of battery powered wireless sensor networks”, IEEE Commun. Surv. Tutorials, Vol.15, No.1, (2013), pp.121–144.
    9. Akhlaq M & Sheltami TR, “The Recursive Time Synchronization Protocol for Wireless Sensor Networks”, IEEE Sensors Appl. Symp. Proc., (2012), pp.1–6.
    10. Akhlaq M, Sheltami TR & Shakshuki EM, “C3: An energy-efficient protocol for coverage, connectivity and communication in WSNs”, Pers. Ubiquitous Comput., Vol.18, No.5, (2014), pp. 1117–1133.
    11. Won M, George SM & Stoleru R, “Towards robustness and energy efficiency of cut detection in wireless sensor networks”, Ad Hoc Networks, Vol.9, No.3, (2011), pp.249– 264.
    12. Toldan P & Kumar AA, “Design Issues and Various Routing Protocols for Wireless Sensor Networks ( WSNs)”, Proceedings of National Conference on New Horizons in IT-NCNHIT, (2013), pp. 65–67.
    13. Hoang T, Nguyen V, Nguyen N & Lang T, “Analysing the performance of unslotted sensor networks based on the IEEE 802.15. 4 employed EIED algorithm”, International Conference on Information Networking (ICOIN), (2017), pp.682-685.
    14. Singh T, Singh J & Sharma S, “Energy efficient secured routing protocol for MANETs”, Wirel. Networks, Vol.23, No.4, (2017), pp.1001–1009.
    15. Yang T, Mu D, Hu W & Zhang H, “Energy-efficient border intrusion detection using wireless sensors network”, Eurasip J. Wirel. Commun. Netw., (2014), pp.1–12.
    16. Ettus M, “System capacity, latency, and power consumption in multihop-routed SS-CDMA wireless networks”, Radio and Wireless Conference, (1998), pp.55-58.

  • Downloads

  • How to Cite

    S. Patil, K. (2018). Design and development of C3 protocol for performance measurement of wireless sensor network. International Journal of Engineering and Technology, 7(2.31), 63-68. https://doi.org/10.14419/ijet.v7i2.31.13398