Parametric Optimization and Control of Heat Exchanger using Linear Quadratic Controller and Dynamic Matrix Controller
Abstract
Heat exchanger plays a important role in many unitsas they have the capability to hold different temperarure and pressure range. In this paper the linear quadratic controller and Dynamic matrix controller is implemented for heat exchanger system. The out let temperature of the tube is controlled by monitoring the inlet flow rate by using different controllers. The model of the system has been obtained from experimental data using system identification technique. The LQR and DMC is compared by analyze the servo performance in the system in terms of settling time, overshoot and rise time.
About this article
Keywords
- Heat exchanger system
- DMC controller
- LQR Controller
- Cold water temperature
References
[1] Alagesan.V, Sundaram.S, “Effect of Heat Transfer Studies on A Water-Palm Oil Two-Phase System in Shell and Tube Heat Exchanger” International journal of ChemTech Research , vol 4(2) PP 502-510. 2012.
[2] Ohadi M.M, *N.Sharaf and D.A.Nelson. "Electro Hydrodynamic Enhancement of Heat Transfer in a Shell-And Tube Heat Exchanger", Experimental Heat Transfer, Vol.4,19-39, 1991.
[3] M.Chidambaram and Y.S.N. Malleswara rao, “Nonlinear Controllers for heat exchangers”, J. Process Control, 2(1), 17-21, 1992.
Kesavan, E., and Rakesh kumar, S., PLC based adaptive PID control of NON linear liquid tank system using online estimation