Skip to content
IJET International Journal of Engineering and Technology E-ISSN 2227-524X

Perspectives of grain pile separation before it enters the thresh-ER

Abstract

The results of laboratory studies confirming the possibility of preliminary separation of free grain from the stripped grain heap before it enters the threshing chamber of a combine harvester are presented. For example, it has been established that the maximum free grain passage through the holes of the lath bottom is 68, 7% with a width of its holes of 8 mm and a length of 160 mm. The length increase of the lath bottom of the inclined chamber of the combine harvester up to 1182 mm ensures a complete separation of grain from the heap and exclude the possibility of its falling into the threshing chamber.

Authors and Affiliations

  • Viktor Ozherelyev
  • Viktor Nikitin
  • Nikolay Belous
  • Vladimir Torikov

About this article

Download PDF

Keywords

  • Combine Harvester
  • Stripping
  • Inclined Chamber
  • Lath Bottom
  • Preliminary Separation of Stripped Grain Heap.

References

[1] Aldoshin N., Lylin N., Mosyakov M. (2017): Harvesting of leguminous crops by the method of stripping. Far Eastern agrarian bulletin, 1: 67-73.

[2] Ozherelyev V., Nikitin V. (2015): Preliminary separation of combed grain heap in an inclined chamber. Agro-industrial complex at the turn of the century, 1: 165-170.

[3] Ozhirelyev V., Nikitin V. (2014): Device for threshing standing plants. Patent Russian Federation No. 2566017.

[4] Khodayari Bavil, A., Razavi, S.E., on the thermo-flow behavior in a rectangular channel with skewed circular ribs, Mechanics & Industry, 18 2 (2017) 225, https://doi.org/10.1051/meca/2016057.

[5] Ozhirelyev V., Nikitin V., Alakin V., Syanovov S. (2013): Investigation of stripped grain heap parameters. Engineering in agriculture, 1: 7-9.

[6] Khosravi M., Mosaddeghi F., Oveisi, M., khodayari-b, A., Aerodynamic drag reduction of heavy vehicles using append devices by CFD analysis, Journal of Central South University, Volume 22, 2015, pp 4645–4652.

[7] Ozherelyev V., Nikitin V., Komogortsev V. (2016): An inclined chamber of a combine harvester. Bulletin of the Bryansk State Agricultural Academy, 3: 65-69.

[8] Savin V. (2011): Substantiation of rational parameters and operating modes of the towed combing device for harvesting grain crops: the author's abstract. Dis. ... cand. Tech. sciences. Voronezh.


How to Cite

Ozherelyev, V., Nikitin, V., Belous, N., & Torikov, V. (2018). Perspectives of grain pile separation before it enters the thresh-ER. International Journal of Engineering and Technology, 7(2.13), 114-116. https://doi.org/10.14419/ijet.v7i2.13.11622