Analysis of exhaust manifold to improve the engine performance
Abstract
The aim of the work is to analyze the performance of the engine exhaust manifold. Because the engine exhaust manifold is a significant factor in the engine performance. In this work the manifold design is prepared with the help of CAD software and it is analyzed by the ANSYS. This CFD and thermal analysis also done to check the performance of the redesigned exhaust manifold. The aim of CFD simulations performed to investigate the volumetric efficiency behaviour of an exhaust.
About this article
Keywords
- Engine Performance
- Exhaust Manifold
- Emission and Fuel Consumption.
References
[1] Gocmez, T., Trampert, S., Nagpal, P., Quadflieg, F.-J., “Designing Exhaust Manifolds Using Integral Engineering Solutions”, Automobile technische Konferenz, 19.-20.10.2006.
[2] Yasar Deger, Burkhard Simperl, Luis P. Jimenez, “Coupled CFD-FE-Analysis for the Exhaust Manifold of a Diesel Engine”, Technical Report Nr. TB03_0123, Sulzer Innotec, Oct. 2009.
[3] Abhijit Londhe, Vivek Yadav, “Thermo-Structural Strength Analysis for Failure Prediction and Concern Resolution of an Exhaust Manifold”, International Journal of Solids and Structures, Vol. 8, pp. 69-91, 2008.
[4] Henrik Ekholm, Bjorn Zettervall, “Modal analysis on a Exhaust manifold to define a catalyst FE model”, The Journal of Engine Research, Vol. 26 (spring 2012).
[5] Razeai, Experimental and finite element vibrational analysis of exhaust manifold heat shield , The Journal of Engine Research,Vol. 24 (spring 2011).
[6] Bin Zou, Yaqian Hu, Zhien Liu, Fuwu Yan and Chao Wang, “The impact of temperature effect on Exhaust manifold Thermal Modal Analysis”, Research Journal of Applied Sciences, Engineering and Technology (15): 2824-2829, 2013.
[7] C Krishnaraj, KM Mohanasundram “Design and implementation study of knowledge based foundry total failure mode effects analysis technique”European Journal of Scientific Research, 2012.
[8] T.Padmapriya and V.Saminadan, “Utility based Vertical Handoff Decision Model for LTE-A networks”, International Journal of Computer Science and Information Security, ISSN 1947-5500, vol.14, no.11, November 2016.
[9] S.V.Manikanthan and D.Sugandhi “ Interference Alignment Techniques For Mimo Multicell Based On Relay Interference Broadcast Channel ” International Journal of Emerging Technology in Computer Science & Electronics (IJETCSE) ISSN: 0976-1353 Volume- 7 ,Issue 1 –MARCH 2014.