Vol 5, No 4 (2016)

Table of Contents


Articles


A laboratory method for obtaining two degrees of freedom gyro-scopic stabilizer transfer function

Mohammad Sadegh Mirzajani Darestani, Seyed Zeynolabedin Moussavi, Parviz Amiri Pages: 102-109

DOI: 10.14419/ijet.v5i4.6439

Comparative study of different alloys during thermal debind-ing of powder injection molded parts

Waleed El-Garaihy, Ahmed Nassef, Medhat El-Hadek Pages: 110-114

DOI: 10.14419/ijet.v5i4.6492

Performance enhancement of MPM using SNR boosting techniques

Shimaa Mamdouh, Amr Hussein, Hamdy Elmekaty Pages: 115-119

DOI: 10.14419/ijet.v5i4.6380

Performance assessment for MUSIC-based DoA estimators

Alzahraa Ghonim, Sameh Napoleon, Mahmoud Attia Pages: 120-125

DOI: 10.14419/ijet.v5i4.6551

Improving of the wear resistance of working parts agricultural machinery by the implementation of the effect of self-sharpening

Victor Aulin, Arifa Warouma, Sergei Lysenko, Alexander Kuzyk Pages: 126-130

DOI: 10.14419/ijet.v5i4.6386

Performance enhancement of MIMO detectors using wavelet de-noising filters

Reham Wgeeh, Amr Hussein, Mahmoud Attia Pages: 131-134

DOI: 10.14419/ijet.v5i4.6371

Simultaneous management and control on cost and time in the project development through fuzzy logic to risk management

Ehsan Rezazadeh Kermani, Mahdi Momeni Pages: 135-138

DOI: 10.14419/ijet.v5i4.6599
science

Copyright © 2017 Science Publishing Corporation Inc. All rights reserved.