Evaluation of students learning outcomes on engineering surveying

  • Authors

    • Goh Boon Hoe University of Nottingham Malaysia
    • Chiang Choon Lai University of Nottingham Malaysia
    • Betsy Lee Guat Poh University of Nottingham Malaysia
    • Kasturi Muthoosamy University of Nottingham Malaysia
    2019-08-25
    https://doi.org/10.14419/ijet.v8i3.29567
  • Engineering Education, Engineering Surveying, Outcomes Based-Education (OBE), Teaching and Learning.

  • Outcomes Based-Education (OBE) is a learning approach that cultivates student centered learning and emphasises on students’ attributes, and it is becoming the mutual agreement by the signatory countries of Washington Accord 1989 to embed the OBE into their engineering education system. The implementation of OBE in an accredited engineering degree involves the design of OBE curriculum by setting the Programme Education Objectives (PEOs), Programme Outcomes (POs) and Module Learning Outcomes (MLOs), and measurement of the attainment of POs and MLOs. This paper presents the evaluation and attainment of POs on Engineering Surveying via Survey Field Course, based on students’ self-evaluation approach, before-and-after attending the course. Five programme outcomes as required by Board of Engineers Malaysia were evaluated and the study revealed that only two programme outcomes (communication, and individual and team work) were not attained and need attention for future improvements.

     

     

  • References

    1. [1] Basri H, Che Man AB, Wan Badaruzzaman WH & Nor MJM (2004). Malaysia and the Washington Accord: What it takes for full membership, International Journal of Engineering and Technology, Volume 1(1), 64-73.

      [2] Hamid R, Yudof KM, Osman SA & Rahmat RAOK (2009). Improvement of Delivery Methods in Teaching Materials Technology, WSEAS Transactions on Advances in Engineering Education, volume 6(3), 77-86.

      [3] Lee YK, Rahim AAA, Thamrin NM, Nor’aini, AJ, Alias NMA & Omar N (2009). An Outcome Based Approach to Delivery and Assessment of a Course in Control System Design, 2009 International Conference on Engineering Education (ICEED 2009), Kuala Lumpur, Malaysia, 7-8 December 2009, 167-172. https://doi.org/10.1109/ICEED.2009.5490592.

      [4] Mahanijah MK & Hadzli MFLH (2009). Examinable Course Assessment Tool Based on Outcome Based Education, 2009 International Conference on Engineering Education (ICEED 2009), Kuala Lumpur, Malaysia, 7-8 December 2009, 177-182.

      [5] Zamri M, Taib MY & Reze MS (2010). Assessment Method for Course Outcome and Programme Outcome in Outcome Based Education (OBE), Malaysian Technical Universities Conference on Engineering and Technology (MUCET2010), Bayview Hotel, Melaka, Malaysia, 28-29 June 2010, 1-4.

      [6] Izham ZA, Adzly A & Hafee NS (2009). Assessing the Attainment of Course Outcomes (CO) for an Engineering Course, 2nd International Conference of Teaching and Learning (ICTL 2009), INTI University College, Malaysia, 16-18 November 2009, 1-7.

      [7] Hafeez NS, Adzly A, Hanim S & Hafiz MH (2009). A Strategy to Evaluate Programme Level Outcomes, 2009 International Conference on Engineering Education (ICEED 2009), Kuala Lumpur, Malaysia, 7-8 December 2009, 159-163.

      [8] Hafeez NS, Adzly A, Ramesh S & Zamri MY (2009). Implementing Continual Quality Improvement (CQI) Process in an Outcome-Based Education (OBE) Approach, 2nd International Conference of Teaching and Learning (ICTL 2009), INTI University College, Malaysia, 16-18 November 2009, 1-8.

      [9] Siti AO, Zaidi MO, Kamaruzaman M, Norhisham TK, Nizam MAR & Zuhairusse MD (2009). Outcome Based Education (OBE) Curriculum Assessment for Industrial Training Program: Based on Students’ Perception, WSEAS Transactions on Advances in Engineering Education, 6(12), 2009, 454-463.

      [10]Takriff MS, Rozaimah SSA, Abu BM & Anuar N (2010). Students’ Feedback in the Continous Quality Improvement Cycle of Engineering Education, 2011 IEEE Global Engineering Education Conference (EDUCON), Amman, Jordan, 4-6 April 2010, pp. 374-377.

      [11]Noor MM, Kadirgama K, Rejab MRM, Sani MSM, Sulaiman A, Rahman MM, Rose ANM, Bakar RA & Ibrahim A (2008). Quality Management System in Implementation of Outcome Based Education at Faculty of Mechanical Engineering, University Malaysia Pahang, 4th International Conference on University Learning and Teaching (InCULT08), Concorde Hotel, Shah Alam, Malaysia, 20-21 October 2008, 277-285.

      [12]Engineering Accreditation Council, Engineering Programme Accreditation Manual 2012, Board of Engineers Malaysia, Kuala Lumpur, Malaysia, 2012.

  • Downloads

  • How to Cite

    Boon Hoe, G., Choon Lai, C., Lee Guat Poh, B., & Muthoosamy, K. (2019). Evaluation of students learning outcomes on engineering surveying. International Journal of Engineering & Technology, 8(3), 252-256. https://doi.org/10.14419/ijet.v8i3.29567