Numerical Investigation on Flexural Beams Made with Metakaolin and Shredded Plastic Waste

  • Authors

    • M. Sivaraj
    • Dr. R. Sundararajan
    • K. Vivek
    • Dr. T. Senthil Vadivel
    2018-09-02
    https://doi.org/10.14419/ijet.v7i3.35.29137
  • Metakaolin, Shredded Plastic Waste, Flexural beams, Finite element modeling
  • Among various building materials, concrete is the most widely used conventional material. Nowadays many scientists are on a hunt for a substitute material for constructionthat is eco-friendly and made from industrial waste products and offer sustainable development. In this study, cement was partially substituted by metakaolin of varying percentage as 0%, 2.5%, 5%, 7.5% and 10% by weight of cement. Shredded plastic waste of 0.5% by weight was added to concrete by replacing coarse aggregate in the concrete. M20 grade concrete is used for beams. Optimum replacement percentage of metakaolin was determined from the tests. Ultimate load carrying capacity of beams produced with the optimum replacement percentage was compared with the numerical investigation done by finite element modelling package ANSYS 12.0.

     

  • References

    1. [1] Smarzewski, Piotr (2016). Numerical solution of reinforcedconcrete beam using arc-length method, Biuletyn WAT, Vol.LXV, Nr 1.

      [2] P. Muthupriya ,Dr.K.Subramanian& Dr.B.G.Vishnuram,“Investigation on Behaviour of High Performance Reinforced concrete columns with metakaolin and fly ash as admixture â€- March 2011 International journal of advanced Engineering Technology, Vol.11 , No.1., Pages 190-202

      [3] Raju & Rajiv Chauhan,“An experimental study on strength behavior of cement concrete with use of plastic fibreâ€- March 2014 International journal of Engineering Research & Applications , Pages 30-34

      [4] Ankur.A.Patel., Deepa.A.Sinha (2011)., “An Experimental Investication On The Effect Of Flyash And Metakaolin On Steel Fibre Reinforced Concrete At Temperature At 20° Câ€, Proceeding Of The National Conference On “Recent Trends In Engineering And Technologyâ€, 13-14th May Organized By BVM Engineering Collage, Vallabh,vidhyanagar-388120.Dist. Anand. (Gujarat), Paper Id-101067

      [5] Sallam H.E., Badawy A.A., and El-Emam H. M. (2013). Numerical Simulation of the Performance of Strengthened RC Beams Using Smeared Crack Approach, Journal of Jazan University-Applied Sciences Branch, Vol.2, No.2, May, (Rajab1434 H).

      [6] Basu, Prabir C, et al, High Reactivity metakaolin: a new pozzolana, proceedings of the national seminar on innovative construction materials, VJTI, Mumbai, Jan 21-22.

  • Downloads

  • How to Cite

    Sivaraj, M., R. Sundararajan, D., Vivek, K., & T. Senthil Vadivel, D. (2018). Numerical Investigation on Flexural Beams Made with Metakaolin and Shredded Plastic Waste. International Journal of Engineering & Technology, 7(3.35), 5-9. https://doi.org/10.14419/ijet.v7i3.35.29137