N-2 Contingency Analysis of an IEEE 14 bus system using MI Power

  • Authors

    • B. Vamshi Ram
    • Poonam Upadhyay
    • G. Radhika
    https://doi.org/10.14419/ijet.v7i4.22.28699
  • Multiple contingencies, Performance indices, Fast Decoupled load flow method.

  • Nowadays multiple outage contingencies are important for the way the transmission network is used in the deregulated environment. With the increasing load demand and to operate economically, the transmission network is heavily stressed.  In this paper, N-2 contingency analysis of an IEEE 14 bus system has been done using MiPower software. Contingency analysis is done for all the possible combinations of N-2 outages of the system using Fast Decoupled load flow method. Real performance index and Voltage performance index are calculated and they are added to give performance index (PI) value to rank the severity of the line outages. Load flow analysis has been done for the severe contingency case.

     

     

  • References

    1. [1] Satyanarayana Burada, Deepak Joshi and Khyati D Mistry, “Contingency Analysis of Power System by using Voltage and Active Power Performance Index,â€1st IEEE International Conference on Power Electronics, Intelligent Control and Energy Systems (ICPEICES-2016), pp. 1-5.

      [2] Debs,A.S.,Benson,A.R., “Security Assessment of Power systems,†Engineering For Power: Status and Prospects U.S. Government Document,CONF-750867,1967,pp. 1-29.

      [3] K.R.Padiyar, “Power System Dynamics, Stability and Control,†B.S.Publications,2008.

      [4] A.J.Wood and B.F.Wollenberg, “ Power generation, operation and control,†John Wiley & Sons,2012.

      [5] C.M.Davis and T.J.Overbye, “Multiple element contingency screening,†IEEE Trans. Power System, vol.26, no.3, pp 1294-1301, Aug. 2011.

      [6] Stott B, Alsac O, “Fast Decoupled Load Flow,†IEEE Trans. on Power Apparatus and Systems, vol.PAS-93,May/June 1974, pp. 859-869.

      [7] G.Ejebe and B.Wollenberg, “ Automatic contingency selection,†IEEE Trans. on Power Apparatus and Systems, pp. 97-109,1979.

      [8] T.E.DyLiacco, “ The Adaptive Reliability control system,†IEEE Trans. on Power Apparatus and Systems, vol.PAS-86, May-1967, pp. 517-531.

  • Downloads

  • How to Cite

    Vamshi Ram, B., Upadhyay, P., & Radhika, G. (2018). N-2 Contingency Analysis of an IEEE 14 bus system using MI Power. International Journal of Engineering & Technology, 7(4.22), 211-214. https://doi.org/10.14419/ijet.v7i4.22.28699