Estimation of Austenitizing and Multiple Tempering Temperatures from the Mechanical Properties of AISI 410 using Artificial Neural Network

  • Authors

    • Abdul Kareem F. Hassan
    • Qahtan A. Jawad
    2018-11-27
    https://doi.org/10.14419/ijet.v7i4.19.27997
  • Artificial neural network ANN, austenitizing temperature, multiple tempering, regression analyses.
  • This research involved a study of the heat treatment conditions effect on the mechanical properties of martensitic stainless steel type AISI 410. Heat treatment process was hardening of the metal by quenching at different temperature 900°C, 950°C, 1000°C, 1050°C and 1100°C, followed by double tempering at 200°C, 250°C, 300°C, 350°C, 400°C, 450°C, 500°C, 550°C, 600°C, 650°C and 700°C, were evaluated and study of some mechanical properties such as hardness, impact energy and properties of tensile test such as yield and tensile strength is carried out. Multiple outputs Artificial Neural Network model was built with a Matlab package to predict the quenching and tempering temperatures. Also, linear and nonlinear regression analyses (using Data fit package) were used to estimate the mathematical relationship between quenching and tempering temperatures with hardness, impact energy, yield, and tensile strength. A comparison between experimental, regression analysis and ANN model show that the multiple outputs ANN model is more accurate and closer to the experimental results than the regression analysis results.

     

  • References

    1. [1] C. M. Allen and B. Boardman, “ASM Handbook, Volume 1, Properties and Selection : Irons , Steels , and High Performance Alloys Section : Publication Information and Contributors Publication Information and Contributors,†in Fonderie, 2005, vol. 1, p. 1618.

      [2] B. Kurt, N. Orhan, I. Somunkiran, and M. Kaya, “The effect of austenitic interface layer on microstructure of AISI 420 martensitic stainless steel joined by keyhole PTA welding process,†Mater. Des., vol. 30, no. 3, pp. 661–664, 2009.

      [3] H. K. D. H. Bhadeshia, “Neural networks in materials science,†ISIJ Int., vol. 39, no. 10, pp. 966–979, 1999.

      [4] B. Smoljan, S. S. Hanza, N. Tomašić, and D. Iljkić, “Computer simulation of microstructure transformation in heat treatment processes,†J. Achiev. Mater. Manuf. Eng., vol. 24, no. 1, pp. 275–282, 2007.

      [5] L. A. Dobrzański and R. Honysz, “Application of artificial neural networks in modelling of normalised structural steels mechanical properties,†vol. 32, no. 1. 2009.

      [6] B. Smoljan, D. Iljkić, and N. Tomašić, “Computer simulation of mechanical properties of quenched and tempered steel specimen,†vol. 40, no. 2, pp. 155–159, 2010.

      [7] T. Thankachan, K. S. Prakash, C. David Pleass, D. Rammasamy, B. Prabakaran, and S. Jothi, “Experimental Study of the Effect of Austenitizing Temperature and Multiple Tempering on the Microstructure of AISI 410 Martensitic Stainless Steel,†in International Journal of Hydrogen Energy, 2017, vol. 42, no. 47, pp. 28612–28621.

      [8] E. Mabruri, S. Prifiharni, M. S. Anwar, T. B. Romijarso, and B. Adjiantoro, “Mechanical properties optimization of the modified 410 martensitic stainless steel by heat treatment process,†Mater. Today Proc., vol. 5, no. 7, pp. 14918–14922, Jan. 2018.

      [9] K. F. Hassan and Q. A. Jawad, “Experimental Study of the Effect of Austenitizing Temperature and Multiple Tempering on the Microstructure of AISI 410 Martensitic Stainless Steel,†in The Iraqi Journal for Mechanical and Materials Engineering, Special Volume for the Third International Scientific Conference, 2015, vol. 1, no. 18, pp. 185–199.

      [10] K. F. Hassan and Q. A. Jawad, “Investigation of the Effect of Austenitizing Temperature and Multiple Tempering on the Mechanical Properties of AISI 410 Martensitic Stainless Steel,†in The Iraqi Journal for Mechanical and Materials Engineering, Special Volume for Babylon First International Engineering Conference, 2016, vol. C, no. 6, pp. 411–435.

      [11] J. M. Hamzah, “Neural Networks of Engine Fault Diagnosis Based on Exhaust Gas Analysis,†University of Basrah, 2012.

      [12] J. Konieczny, “Application of the artificial neural networks for prediction of hardness of alloyed copper,†vol. 55, no. 2, pp. 529–535, 2012.

      [13] K. T. Chiang, F. P. Chang, and D. C. Tsai, “Modeling and analysis of the rapidly resolidified layer of SG cast iron in the EDM process through the response surface methodology,†J. Mater. Process. Technol., vol. 182, no. 1–3, pp. 525–533, 2007.

  • Downloads

  • How to Cite

    Kareem F. Hassan, A., & A. Jawad, Q. (2018). Estimation of Austenitizing and Multiple Tempering Temperatures from the Mechanical Properties of AISI 410 using Artificial Neural Network. International Journal of Engineering & Technology, 7(4.19), 778-787. https://doi.org/10.14419/ijet.v7i4.19.27997