Ion Transport Mechanism in Flexible PMMAIL/LiTf Films

  • Authors

    • Nabilah Akemal Muhd Zailani
    • Famiza Abdul Latif
    • Ab Malik Marwan Ali
    • Mohd A Azri Ab Rani
    • Muhd Zu Azhan Yahya
    2019-12-24
    https://doi.org/10.14419/ijet.v7i4.14.27781
  • Ionic liquid, ion transport mechanism, lithium triflate, PMMA, polymer electrolytes.
  • Acrylates such as poly (methyl methacrylate) (PMMA) has been widely studied as polymer electrolyte film due to its good mechanical stability towards lithium electrode.  However, commercial PMMAs even at high molecular weight are not able to produce flexible films due to their polar nature that prone to form interchain crosslinking via hydrogen bonding. Therefore, the formation of hydrogen bonding was hindered by incarcerating ionic liquid (IL) of 1-methyl-3-pentamethyldisiloxymethylimidazolium bis(trifluoromethylsulfonyl)imide, [(SiOSi)C1C1im] [NTf2] during free radical polymerization of MMA. Interestingly, the synthesized PMMA containing IL (PMMAIL) produced flexible and free standing films with ionic conductivity of ~10-7 S cm-1. Though the ionic conductivity obtained is comparable with other doped PMMA film electrolytes that had been studied, it is still considered as low for application in energy storage devices. As an alternative, in this study, lithium triflate (LiTf) salt was added into the PMMAIL system and the highest ionic conductivity obtained was 2.65 ×10-4 S cm-1 with addition of 30 wt.% LiTf at ambient temperature. The temperature dependence conductivity and AC conductivity behaviour of PMMAIL/LiTf were further investigated in order to fully understand the ion transport mechanism that occurred in the system. It was found that the PMMAIL/LiTf system fits the Arrhenius behaviour and Correlated Barrier Hopping (CBH) model.

     

     

  • References

    1. [1] Agrawal, R. C., & Pandey, G. P. (2008). Solid polymer electrolytes: materials designing and all-solid-state battery applications: an overview. Journal of Physics D: Applied Physics, 41(22), 223001.

      [2] Latif, F.A. (2006). Preparation and characterization of poly (methyl methacrylate)/50% epoxidised natural rubber based solid electrolytes for lithium-ion secondary battery (Doctoral dissertation, Universiti Teknologi Malaysia).

      [3] Rajendran, S., Sivakumar, M., & Subadevi, R. (2004). Investigations on the effect of various plasticizers in PVA–PMMA solid polymer blend electrolytes. Materials Letters, 58(5), 641-649.

      [4] Chew, K. W., & Tan, K. W. (2011). The effects of ceramic fillers on PMMA-based polymer electrolyte salted with lithium triflate, LiCF3SO3. International Journal of Electrochemical Science, 6, 5792-5801.

      [5] Appetecchi, G. B., Croce, F., & Scrosati, B. (1995). Kinetics and stability of the lithium electrode in poly(methylmethacrylate)-based gel electrolytes. Electrochimica Acta, 40(8), 991-997.

      [6] Xie, Z. L., Xu, H. B., Geßner, A., Kumke, M. U., Priebe, M., Fromm, K. M., & Taubert, A. (2012). A Transparent, flexible, ion conductive, and luminescent PMMA ionogel based on a Pt/Eu bimetallic complex and the ionic liquid [Bmim][N(Tf)2]. Journal of Materials Chemistry, 22(16), 8110-8116.

      [7] Xie, Z. L., JeliÄić, A., Wang, F. P., Rabu, P., Friedrich, A., Beuermann, S., & Taubert, A. (2010). Transparent, flexible, and paramagnetic ionogels based on PMMA and the iron-based ionic liquid 1-butyl-3-methylimidazolium tetrachloroferrate (III) [Bmim][FeCl4]. Journal of Materials Chemistry, 20(42), 9543-9549.

      [8] Zailani, N. A. M., Latif, F. A., Ali, A. M. M., Zainuddin, L. W., Kamaruddin, R., & Yahya, M. Z. A. (2017). Effect of ionic liquid incarceration during free radical polymerization of PMMA on its structural and electrical properties. Ionics, 23(2), 295-301.

      [9] Azuan, M., Husna, S. I., Abdul Latif, F., Zamri, M., & Fadli, S. (2016). Effects of dodecanoic acid modified SiO2 on filler dispersion and ionic conductivity of PMMA/ENR-50/LIBF4 Electrolytes. Materials Science Forum, 846, 528-533.

      [10] Shukla, N., & Thakur, A. K. (2009). Role of salt concentration on conductivity optimization and structural phase separation in a solid polymer electrolyte based on PMMA-LiClO4. Ionics, 15(3), 357–367.

      [11] Muhammad, F. H., Jamal, A., & Winie, T. (2016). Dielectric and AC conductivity behavior of hexanoyl chitosan-NaI based polymer electrolytes. International Journal of Advanced and Applied Sciences, 3(10), 9-13.

      [12] Ratner, M. A., & Shriver, D. F. (1988). Ion Transport in Solvent-Free Polymers. Chemical Reviews, 88, 109–12.

      [13] Kadir, M. F. Z., Majid, S. R., & Arof, A. K. (2010). Plasticized chitosan - PVA blend polymer electrolyte based proton battery. Electrochimica Acta, 55(3), 1475–1482

      [14] Ramesh, S., & Chai, M. F. (2007). Conductivity, dielectric behavior and FTIR Studies of high molecular weight poly(vinylchloride)–lithium triflate polymer electrolytes. Materials Science and Engineering: B, 139(2–3), 240–245.

      [15] Jamal, A., Muhammad, F. H., Ali, A. M. M., & Winie, T. (2017). Blends of hexanoyl chitosan/epoxidized natural rubber doped with EMImTFSI. Ionics, 23(2), 357-366.

      [16] Abidin, S. Z. Z., Yahya, M. Z. A., Hassan, O. H., & Ali, A. M. M. (2014). Conduction mechanism of lithium bis(oxalato)borate – cellulose acetate polymer gel electrolytes. Ionics, 20(12), 1671–1680.

      [17] Jonscher, A. K. (1977). The universal dielectric response. Nature, 267(5613), 673–679.

      [18] Buraidah, M. H., Teo, L. P., Majid, S. R., & Arof, A. K. (2009). Ionic conductivity by correlated barrier hopping in NH4I doped chitosan solid electrolyte. Physica B: Condensed Matter, 404(8-11), 1373-1379.

      [19] Taher, Y. Ben, Maaloul, A. O. N. K., & Gargouri, K. K. M. (2015). Conductivity study and correlated barrier hopping (CBH) conduction mechanism in diphosphate compound. Applied Physics A: Materials Science and Processing, 120, 1537–1543.

      [20] Mahmoud, K. H., Abdel-Rahim, F. M., Atef, K., & Saddeek, Y. B. (2011). Dielectric dispersion in lithium–bismuth-borate glasses. Current Applied Physics, 11(1), 55-60.

      [21] Funke, K. (1997). Ion Transport in Fast Ion Conductors. Solid State Ionics, 94, 27–33.

  • Downloads

  • How to Cite

    Akemal Muhd Zailani, N., Abdul Latif, F., Malik Marwan Ali, A., Azri Ab Rani, M. A., & Zu Azhan Yahya, M. (2019). Ion Transport Mechanism in Flexible PMMAIL/LiTf Films. International Journal of Engineering & Technology, 7(4.14), 515-519. https://doi.org/10.14419/ijet.v7i4.14.27781