Computer Simulation Model of High Efficiency Wireless DC Power Supply

  • Authors

    • Muhammad Atiq Aminudin
    • Rahimi Baharom
    • Norazlan Hashim
    2019-01-18
    https://doi.org/10.14419/ijet.v8i1.7.25974
  • DC power supply, Wireless power transfer, High frequency inverter, Power transfer efficiency.
  • This paper presents the computer simulation model of high efficiency wireless DC power supply. The proposed system uses 20 kHz switching frequency of the half-bridge inverter and this value is suitable for the wireless power transfer in order to obtain high efficiency power transfer. In this work, the mutual inductance is used to present the wireless power transfer (WPT) function. The parameter used is based on the actual practical values of Vishay Radial Wireless Charging Transmitter Coil details. This future innovative technology of WPT system is possible to supply electric power especially for mobile or rotating devices without any wire or cable. The WPT system was targeted to achieve power transfer efficiency of higher than 90% between the transmitter and receiver coils. A computer simulation model using MATLAB/Simulink was developed to investigate the behavior and possible inaccuracies of the proposed system.

     

  • References

    1. [1] D. H. Tran, V. B. Vu, and W. Choi, “Design of a High Efficiency Wireless Power Transfer System with Intermidiate Coils for the On-board Chargers of Electric Vehicles,†IEEE Trans. Power Electron., vol. 33, no. 1, pp. 1–1, 2017.

      [2] B. Yang, S. Du, W. Chen, C. Deng, D. Xu, and A. E. Circuit, “Optimal Parameters Design for Series-Series Resonant Converter for Wireless Power Transfer,†2014 International Power Electronics and Application Conference and Exposition, pp. 772-777.

      [3] S. Moon and G.-W. Moon, “Wireless Power Transfer System with an Asymmetric 4-Coil Resonator for Electric Vehicle Battery Chargers,†2015 IEEE Appl. Power Electron. Conf. Expo., vol. 31, no. 10, pp. 1650–1657, 2015.

      [4] H. Dai, Y. Liu, G. Chen, X. Wu, and T. He, “Safe Charging for wireless power transfer,†Proc. - IEEE INFOCOM, vol. 25, no. 6, pp. 1105–1113, 2014.

      [5] R. Baharom, M. N. Seroji, M. K. M. Salleh, and K. S. Muhammad, “Impact of switching frequency variation to the power transfer efficiency of wireless power transfer converter,†2016 IEEE Symp. Comput. Appl. Ind. Electron., pp. 127–131, 2016.

      [6] S. Li and C. Mi, “Wireless Power Transfer for Electric Vehicle Applications,†Emerg. Sel. Top. Power Electron. IEEE J., vol. PP, no. 99, p. 1, 2014.

      [7] H. Zheng, Z. Wang, Y. Li, and P. Deng, “Data transmission through energy coil of wireless power transfer system,†2017 IEEE PELS Work. Emerg. Technol. Wirel. Power Transf. WoW 2017, pp. 4–7, 2017.

      [8] D. Ahn, “Transmitter Coil Resonant Frequency Selection for Wireless Power Transfer,†IEEE Trans. Power Electron., vol. 8993, no. c, pp. 1–1, 2017.

      [9] R. W. Porto, V. J. Brusamarello, I. Müller, F. L. Cabrera Riaño, and F. Rangel De Sousa, “Wireless power transfer for contactless instrumentation and measurement,†IEEE Instrum. Meas. Mag., vol. 20, no. 4, pp. 49–54, 2017.

      [10] M. Feliziani and S. Cruciani, “Mitigation of the magnetic field generated by a wireless power transfer (WPT) system without reducing the WPT efficiency,†Int. Symp. Electromagn. Compat. (EMC Eur., pp. 610–615, 2013.

      [11] P. Benefits, “New IWTX-4646BE-50 Wireless Charging Transmitter Coil,†no. October, 2014.

      [12] D. Ahn and S. Hong, “A study on magnetic field repeater in wireless power transfer,†IEEE Trans. Ind. Electron., vol. 60, no. 1, pp. 360–371, 2013.

      [13] A. L. F. Stein, P. A. Kyaw, and C. R. Sullivan, “Figure of merit for resonant wireless power transfer,†2017 IEEE 18th Work. Control Model. Power Electron., pp. 1–7, 2017.

      [14] D. Kurschner, C. Rathge, and U. Jumar, “Design methodology for high efficient inductive power transfer systems with high coil positioning flexibility,†IEEE Trans. Ind. Electron., vol. 60, no. 1, pp. 372–381, 2013.

      [15] S. Y. Choi, B. W. Gu, S. Y. Jeong, and C. T. Rim, “Advances in wireless power transfer systems for roadway-powered electric vehicles,†IEEE J. Emerg. Sel. Top. Power Electron., vol. 3, no. 1, pp. 18–36, 2015.

      [16] Muhammad H. Rashid, “Power electronics devices, circuits and applicationsâ€, 2014.

      [17] D.Kirubakaran and S.Ramareddy, “Comparison of Parallel Resonant Inverter and Series,†J. Electr. Eng., pp. 1–6.

      [18] Nicolas Tesla, “Apparatus for transmitting electrical energyâ€, US Patent 1119732, 1914.

      [19] W. H. Ko, “Design of radio frequency powered coils for implant instrumentsâ€, Medical & Biological Engineering & computing, 1977.

      [20] Ping Si, A P. Hu, S. Malpas, and D. Budgett, “A frequency control method for regulating wireless power to implantable devices.,†Biomed. circuits Syst., vol. 2, no. 1, pp. 22–9, 2008.

      [21] R. Shadid, S. Noghanian, and A. Nejadpak, “A Literature Survey of Wireless Power Transfer,†2016 IEEE Int. Conf. Electro Inf. Technol., pp. 0782–0787, 2016.

      [22] T. Thavaratnam, C. Li, and D. Xu, “Switching frequency selection for aerospace power converter system considering the design of output LC filter inductor optimizing weight and power loss,†2016 IEEE Electr. Power Energy Conf. EPEC 2016, 2016.

      [23] S. Moon, B.-C. Kim, S.-Y. Cho, C.-H. Ahn, and G.-W. Moon, “Analysis and Design of a Wireless Power Transfer System With an Intermediate Coil for High Efficiency,†IEEE Trans. Ind. Electron., vol. 61, no. 11, pp. 5861–5870, 2014.

      [24] S. Kashyap, E. Björnson, and E. G. Larsson, “Can wireless power transfer benefit from large transmitter arrays?,†2015 IEEE Wirel. Power Transf. Conf. WPTC 2015, 2015.

      [25] F. Van Der Pijl, P. Bauer, and M. Castilla, “Control method for wireless inductive energy transfer systems with relatively large air gap,†IEEE Trans. Ind. Electron., vol. 60, no. 1, pp. 382–390, 2013.

  • Downloads

  • How to Cite

    Atiq Aminudin, M., Baharom, R., & Hashim, N. (2019). Computer Simulation Model of High Efficiency Wireless DC Power Supply. International Journal of Engineering & Technology, 8(1.7), 178-183. https://doi.org/10.14419/ijet.v8i1.7.25974