Contribution of Heat Generation During Charging on Thermal Behaviour of Lithium-Ion Battery for HEVs Application

  • Authors

    • Siti Sarah Mohd Puzi
    • Zul Hilmi Che Daud
    • Zainab Asus
    • Saiful Anuar Abu Bakar
    • Nurulakmar Abu Husain
    • Mohd Kameil Abdul Hamid
    https://doi.org/10.14419/ijet.v7i3.7.25733
  • numerical mode, lithium ion battery, thermal behaviour, hybrid electric vehicle

  • Lithium ion battery is a suitable choice in hybrid electric vehicles (HEVs) mainly because of its high energy density. Operating temperature is an important factor influencing the performance and safety of the batteries in HEVs. For this reason, the study on the battery thermal behavior during charging and discharging is necessary. The focus of this study is to develop a battery model using Matlab/Simulink software to predict the battery thermal behavior at different charge and discharge rates. A vehicle model incorporating aerodynamic drag force, rolling resistance, hill climbing force and acceleration force is used. The battery model and the vehicle model are combined to form a series hybrid electric vehicle model able to predict the battery performance in enduring the NEDC driving cycle. Result from this study is important for better understanding of the battery thermal behaviour, so a suitable battery management system can be developed ensuring an optimum use of lithium ion batteries in automotive applications.

     


     

  • References

    1. [1] Liu, F., et al., Dynamic thermal characteristics of heat pipe via segmented thermal resistance model for electric vehicle battery cooling. Journal of Power Sources, 2016. 321: p. 57–70.

      [2] Wang, Q., et al., A critical review of thermal management models and solutions of lithium-ion batteries for the development of pure electric vehicles. Renewable and Sustainable Energy Review, 2016. 64: p. 106-128.

      [3] Yinjiao, X., et al., Battery Management Systems in Electric And Hybrid Vehicles. Energies, 2011. 4: p. 1840 – 1857.

      [4] Mohammadian, S.K., & Zhang, Y., Thermal management optimization of an air-cooled Li-ion battery module using pin-fin heat sinks for hybrid electric vehicles. Journal of Power Sources, 2015. 273: P. 431-439.

      [5] Larminie, J., & Lowry, J., Electric Vehicle Technology Explained. 1st Edition. John Wiley & Sons Ltd. West Sussex, England, 2003.

      [6] Erdinc, O., et al., A Dynamic Lithium-Ion Battery Model Considering the Effects of Temperature and Capacity Fading, in International Conference on Clean Electrical Power. 2009.

      [7] Chen, M., & Rincon-Mora, G. A., Accurate electrical battery model capable of predicting runtime and i-v performance. IEEE Transactions on Energy Conversion, 2006. 21: p. 504–511.

      [8] Bhide S., & Shim T., Development of Improved Li-ion Battery Model Incorporating Thermal and Rate Factor Effects. In IEEE Transactions, 2009. p. 544-550.

      [9] Gao L., Liu S., & Dougal R.A., Dynamic Lithium-Ion Battery Model for System Simulation. In IEEE Transactions on Components and packaging Technologies, 2008. 25: p. 495-505.

      [10] Eddahec, O., et al., Thermal characterization of a high-power lithium-ion battery: Potentiometric and calorimetric measurement of entropy changes. Energy, 2013. 61: p. 432 – 439.

  • Downloads

  • How to Cite

    Sarah Mohd Puzi, S., Hilmi Che Daud, Z., Asus, Z., Anuar Abu Bakar, S., Abu Husain, N., & Kameil Abdul Hamid, M. (2018). Contribution of Heat Generation During Charging on Thermal Behaviour of Lithium-Ion Battery for HEVs Application. International Journal of Engineering & Technology, 7(3.7), 666-668. https://doi.org/10.14419/ijet.v7i3.7.25733